gcm_setup

#!/bin/tcsh -f

#######################################################################
#                            Define Colors
#         Note:  For No Colors, set C1 and C2 to NONE
#######################################################################

set BLACK   = `tput setaf 0`
set RED     = `tput setaf 1`
set GREEN   = `tput setaf 2`
set YELLOW  = `tput setaf 3`
set BLUE    = `tput setaf 4`
set MAGENTA = `tput setaf 5`
set CYAN    = `tput setaf 6`
set WHITE   = `tput setaf 7`
set RESET   = `tput sgr0`
set BOLD    = `tput bold`
set COLORS  = `echo $BLACK $RED $GREEN $YELLOW $BLUE $MAGENTA $CYAN $WHITE $RESET`

if( -e $HOME/.GCMSETUP ) then
     set GCMSETUPinfo = `cat $HOME/.GCMSETUP`
     set C1 = $GCMSETUPinfo[1]
     set C2 = $GCMSETUPinfo[2]
else
     set C1 = $RED
     set C2 = $BLUE
endif
     set CN = $RESET

#######################################################################
#                     Build Directory Locations
#######################################################################

# Set Current Working Path to gcm_setup
# -------------------------------------
setenv ARCH `uname -s`
setenv NODE `uname -n`

if ($ARCH == Darwin) then
   set PRELOAD_COMMAND = 'DYLD_INSERT_LIBRARIES'
   set LD_LIBRARY_PATH_CMD = 'DYLD_LIBRARY_PATH'
   # On macOS we seem to need to call mpirun directly and not use esma_mpirun
   # For some reason SIP does not let the libraries be preloaded
   set RUN_CMD = 'mpirun -np '
else
   set PRELOAD_COMMAND = 'LD_PRELOAD'
   set LD_LIBRARY_PATH_CMD = 'LD_LIBRARY_PATH'
   set RUN_CMD = '$GEOSBIN/esma_mpirun -np '
endif
set BINDIR   = `pwd -L`
set GEOSDEF  = `dirname $BINDIR`
set ETCDIR   = ${GEOSDEF}/etc

# Test if GEOSgcm.x is here which means you are in install directory
if (! -x ${BINDIR}/GEOSgcm.x) then
   echo "You are trying to run $0 in the Applications/GEOSgcm_App directory"
   echo "This is no longer supported. Please run from the bin/ directory"
   echo "in your installation"
   exit 1
endif

######################################################################
#                        Singularity Sandbox
#######################################################################

# This section is to determine if we are running in a Singularity
# sandbox by looking for the .singularity.d directory. If we are,
# then we set the SINGULARITY_SANDBOX environment variable to the
# path to the sandbox. If we are not, then we set it to an empty
# string.
#
# We also set the REAL_BIND_PATH and BASE_BIND_PATH environment
# variables. These are used to set the bind paths for Singularity
# runs. REAL_BIND_PATH is the physical path to the NOBACKUP directory
# and BASE_BIND_PATH is the physical path to the /gpfsm directory
# (needed for boundary conditions)

setenv KEYFILE ".singularity.d"
setenv singstat 0
setenv ORIGPATH `pwd -P`
cd $GEOSDEF
while ($singstat == 0)
   if (-d $KEYFILE) then
      setenv singstat 1
      setenv SINGPATH `pwd -P`
   endif
   if ($singstat == 0) then
      if ("$cwd" == "/") then
         break
      else
         cd ..
      endif
   endif
end
if ($singstat == 1) then
   setenv SINGULARITY_SANDBOX $SINGPATH
   setenv REAL_BIND_PATH `realpath $NOBACKUP`
   setenv BASE_BIND_PATH "/gpfsm"
else
   setenv SINGULARITY_SANDBOX ""
   setenv REAL_BIND_PATH ""
   setenv BASE_BIND_PATH ""
endif

cd $ORIGPATH

#######################################################################
#                   Test for Command Line Flags
#######################################################################

# Set default behavior of switches
set LINKX = FALSE
set EXE_VERB = "copied"
set SINGULARITY_RUN_SITE = ""
if ($singstat == 1) then
   set USING_SINGULARITY = TRUE

   # If we are using Singularity, then where the image was built (say
   # AWS) might not match where we run. We at least know NCCS and NAS,
   # so we can use that to set the site.

   if (($NODE =~ discover*) || ($NODE =~ borg*) || ($NODE =~ warp*)) then
      set SINGULARITY_RUN_SITE = "NCCS"
   else if (($NODE =~ pfe*) || \
            ($NODE =~ afe*) || \
            ($NODE =~ athfe*) || \
            ($NODE =~ r[0-9]*i[0-9]*n[0-9]*) || \
            ($NODE =~ r[0-9]*c[0-9]*t[0-9]*n[0-9]*) || \
            ($NODE =~ x[0-9]*c[0-9]*s[0-9]*b[0-9]*n[0-9]*)) then
      set SINGULARITY_RUN_SITE = "NAS"
   endif
else
   set USING_SINGULARITY = FALSE
endif

while ( $#argv > 0 )
   set arg = $argv[1]
   shift argv
   switch ( $arg )
      # Set our colors
      case -[Cc]:
      case --[Cc][Oo][Ll][Oo][Rr]:
         goto SETCOLOR

      # Symlink GEOSgcm.x
      case --link:
         set LINKX = TRUE
         set EXE_VERB = "linked"
         breaksw

      # Avoid Symlink GEOSgcm.x
      case --nolink:
         set LINKX = FALSE
         breaksw

      # Here any string not above will trigger USAGE
      case -[Hh]:
      case --[Hh][Ee][Ll][Pp]:
      default:
         goto USAGE
   endsw
end

#######################################################################
#                        Determine site
#######################################################################

if ($SINGULARITY_RUN_SITE == "") then
   setenv SITE `awk '{print $2}' $ETCDIR/SITE.rc`
else
   setenv SITE $SINGULARITY_RUN_SITE
endif

#######################################################################
#                 Test for Compiler and MPI Setup
#######################################################################

# Get MPI stack from CMake
set MPI_STACK = @MPI_STACK@

#######################################################################
#               Enter Experiment Specific Run Parameters
#######################################################################

echo
echo "Enter the ${C1}Experiment ID${CN}:"
set EXPID = $<

DESC:
echo "Enter a 1-line ${C1}Experiment Description${CN}:"
set EXPTMP =  `echo $<`
if( $#EXPTMP == 0 ) goto DESC
set EXPDSC =  $EXPTMP[1]
foreach WORD ($EXPTMP)
if( $WORD !=  $EXPDSC ) set EXPDSC = `echo ${EXPDSC}_${WORD}`
end

GEOSTAG:
set GEOSTAG = `cat ${ETCDIR}/.AGCM_VERSION`

#######################################################################
#            Test to see if you want to CLONE old experiment
#######################################################################

# Check for CLONE
# ---------------
ASKCLONE:
echo "Do you wish to ${C1}CLONE${CN} an old experiment? (Default: ${C2}NO${CN} or ${C2}FALSE${CN})"
set   KLONE  = $<
if( .$KLONE == . ) then
   set   KLONE  = FALSE
else
   set   KLONE  = `echo   $KLONE | tr "[:lower:]" "[:upper:]"`
   if(  $KLONE == "Y"     | \
        $KLONE == "YES"   | \
        $KLONE == "T"     | \
        $KLONE == "TRUE"  ) set KLONE = TRUE
   if(  $KLONE == "N"     | \
        $KLONE == "NO"    | \
        $KLONE == "F"     | \
        $KLONE == "FALSE" ) set KLONE = FALSE

   if( $KLONE != "TRUE" & $KLONE != "FALSE" ) then
      echo
      echo "${C1}CLONE${CN} must be set equal to ${C2}TRUE${CN} or ${C2}FALSE${CN}!"
      goto ASKCLONE
   else if ( $KLONE == "TRUE" ) then
      goto DOCLONE
   endif
endif

#######################################################################
#          Continue to enter in experiment parameters
#######################################################################

HRCODE:
echo "Enter the ${C1}Atmospheric Horizontal Resolution${CN} code:"
echo "--------------------------------------"
echo "            Cubed-Sphere"
echo "--------------------------------------"
echo "   ${C2}c12  -- 8    deg (${C1}750.0    km${C2}) ${CN}"
echo "   ${C2}c24  -- 4    deg (${C1}375.0    km${C2}) ${CN}"
echo "   ${C2}c48  -- 2    deg (${C1}187.5    km${C2}) ${CN}"
echo "   ${C2}c90  -- 1    deg (${C1}100.0    km${C2}) ${CN}"
echo "   ${C2}c180 -- 1/2  deg (${C1} 50.0    km${C2}) ${CN}"
echo "   ${C2}c360 -- 1/4  deg (${C1} 25.0    km${C2}) ${CN} "
echo "   ${C2}c720 -- 1/8  deg (${C1} 12.5    km${C2}) ${CN}"
echo "   ${C2}c1440 - 1/16 deg (${C1}  6.25   km${C2}) ${CN}"
echo "   ${C2}c2880 - 1/32 deg (${C1}  3.125  km${C2}) ${CN}"
echo "   ${C2}c5760 - 1/64 deg (${C1}  1.5625 km${C2}) ${CN}"
echo "   ${C2}         CONUS Stretched Grids                "
echo "   ${C2}c270 -- (${C1} 16.0 -100 km${C2}) ${CN} "
echo "   ${C2}c540 -- (${C1}  8.0 - 50 km${C2}) ${CN} "
echo "   ${C2}c1080 - (${C1}  4.0 - 25 km${C2}) ${CN} "
echo "   ${C2}c1536 - (${C1}  2.0 - 20 km${C2}) ${CN} "
echo "   ${C2}c2160 - (${C1}  2.0 - 12 km${C2}) ${CN} "
echo " "
set HRCODE = `echo $<`
set HRCODE = `echo $HRCODE | tr "[:upper:]" "[:lower:]"`

if( $HRCODE != 'c12'   & \
    $HRCODE != 'c24'   & \
    $HRCODE != 'c48'   & \
    $HRCODE != 'c90'   & \
    $HRCODE != 'c180'  & \
    $HRCODE != 'c360'  & \
    $HRCODE != 'c720'  & \
    $HRCODE != 'c1440' & \
    $HRCODE != 'c2880' & \
    $HRCODE != 'c5760' & \
    $HRCODE != 'c270'  & \
    $HRCODE != 'c540'  & \
    $HRCODE != 'c1080' & \
    $HRCODE != 'c1536' & \
    $HRCODE != 'c2160' ) goto HRCODE

set Resolution = $HRCODE

set DYCORE  = FV3
set AGCM_NF = 6
set GRID_TYPE = "Cubed-Sphere"
if (`echo $Resolution[1] | cut -b1` == "c" ) then
   set  AGCM_IM = $Resolution[1]
else
   set  AGCM_IM = "c$Resolution[1]"
endif

# We make a variable here so we can easily discriminate for CS ocean support below
if ( $AGCM_IM == 'c12' || $AGCM_IM == 'c24' || $AGCM_IM == 'c48' ) then
   set LOW_ATM_RES = TRUE
else
   set LOW_ATM_RES = FALSE
endif

# These are superfluous for GCM, but needed for SCM (considered latlon)
set LATLON_AGCM = "#DELETE"
set CUBE_AGCM = ""

echo "Enter the Atmospheric Model ${C1}Vertical Resolution${CN}: ${C2}LM${CN} (Default: 72)"
set   AGCM_LM = $<
if( .$AGCM_LM == . ) then
  set AGCM_LM = 72
endif


#######################################################################
#                 Choose microphysics option
#######################################################################

ASKMP:

echo "Enter Choice for Atmospheric Model ${C1}Microphysics${CN}: (Default: BACM_1M)"
echo "   ${C2}BACM_1M  --  3-phase 1-moment Bacmeister et al${CN}"
echo "   ${C2}GFDL_1M  --  6-phase 1-moment Geophysical Fluid Dynamics Laboratory${CN}"
echo "   ${C2}MGB2_2M  --  5 or 6-phase 2-moment Morrison & Gettleman${CN}"
set   CLDMICRO = $<
if( .$CLDMICRO == . ) then
   set CLDMICRO = "BACM_1M"
else
   set CLDMICRO = `echo $CLDMICRO | tr "[:lower:]" "[:upper:]"`
   if( "$CLDMICRO" != "BACM_1M" & \
       "$CLDMICRO" != "GFDL_1M" & \
       "$CLDMICRO" != "MGB2_2M"  ) then
       echo
       echo "${C1}Microphysics${CN} must be one of the options below!"
       goto ASKMP
   endif
endif


#######################################################################
#   Test to see if using hydrostatic or non-hydrostatic atmosphere
#######################################################################

ASKHYDRO:

set DEFAULT_HYDROSTATIC = TRUE

echo "Use ${C1}Hydrostatic Atmosphere${CN}? (Default: ${C2}${DEFAULT_HYDROSTATIC}${CN})"
set   USE_HYDROSTATIC = $<

if( .$USE_HYDROSTATIC == . ) then
   set USE_HYDROSTATIC = $DEFAULT_HYDROSTATIC
else
   set USE_HYDROSTATIC = `echo $USE_HYDROSTATIC | tr "[:lower:]" "[:upper:]"`
   if(  $USE_HYDROSTATIC == "Y"     | \
        $USE_HYDROSTATIC == "YES"   | \
        $USE_HYDROSTATIC == "T"     | \
        $USE_HYDROSTATIC == "TRUE"  ) set USE_HYDROSTATIC = TRUE
   if(  $USE_HYDROSTATIC == "N"     | \
        $USE_HYDROSTATIC == "NO"    | \
        $USE_HYDROSTATIC == "F"     | \
        $USE_HYDROSTATIC == "FALSE" ) set USE_HYDROSTATIC = FALSE

   if( "$USE_HYDROSTATIC" != "TRUE" & "$USE_HYDROSTATIC" != "FALSE" ) then
      echo
      echo "Use ${C1}Hydrostatic Atmosphere${CN} must be set equal to ${C2}TRUE/YES${CN} or ${C2}FALSE/NO${CN}!"
      goto ASKHYDRO
   endif
endif


#######################################################################
#            Test to see if you want to use ioserver
#######################################################################

ASKIOS:

if( $HRCODE == 'c180'  | \
    $HRCODE == 'c360'  | \
    $HRCODE == 'c720'  | \
    $HRCODE == 'c1440' | \
    $HRCODE == 'c270'  | \
    $HRCODE == 'c540'  | \
    $HRCODE == 'c1080' | \
    $HRCODE == 'c1536' | \
    $HRCODE == 'c2160' ) then

    set DEFAULT_DO_IOS = TRUE
    echo "Do you wish to ${C1}IOSERVER${CN}? (Default: ${C2}YES${CN} or ${C2}TRUE${CN})"
else
    set DEFAULT_DO_IOS = FALSE
    echo "Do you wish to ${C1}IOSERVER${CN}? (Default: ${C2}NO${CN} or ${C2}FALSE${CN})"
endif

set   DO_IOS  = $<
if( .$DO_IOS == . ) then
   set   DO_IOS  = $DEFAULT_DO_IOS
else
   set   DO_IOS  = `echo   $DO_IOS | tr "[:lower:]" "[:upper:]"`
   if(  $DO_IOS == "Y"     | \
        $DO_IOS == "YES"   | \
        $DO_IOS == "T"     | \
        $DO_IOS == "TRUE"  ) set DO_IOS = TRUE
   if(  $DO_IOS == "N"     | \
        $DO_IOS == "NO"    | \
        $DO_IOS == "F"     | \
        $DO_IOS == "FALSE" ) set DO_IOS = FALSE

   if( $DO_IOS != "TRUE" & $DO_IOS != "FALSE" ) then
      echo
      echo "${C1}IOSERVER${CN} must be set equal to ${C2}TRUE/YES${CN} or ${C2}FALSE/NO${CN}!"
      goto ASKIOS
   endif
endif

if ( $DO_IOS == "TRUE" ) then
   set USE_IOSERVER = 1
else
   set USE_IOSERVER = 0
endif

#######################################################################
#                 What Processor Should We Run On?
#######################################################################

ASKPROC:

if ( $SITE == 'NCCS' ) then

   echo "Enter the ${C1}Processor Type${CN} you wish to run on:"
   echo "   ${C2}mil  (Milan)${CN} (default)"
   echo "   ${C2}cas  (Cascade Lake)${CN}"
   echo " "
   set MODEL = `echo $<`
   set MODEL = `echo $MODEL | tr "[:upper:]" "[:lower:]"`
   if ( .$MODEL == .) then
      set MODEL = 'mil'
   endif

   if( $MODEL != 'mil' & \
         $MODEL != 'cas' ) goto ASKPROC

   if ($MODEL == 'mil') then
      # We save a couple processes for the kernel
      set NCPUS_PER_NODE = 126
   else if ($MODEL == 'cas') then
      # NCCS currently recommends that users do not run with
      # 48 cores per node on SCU16 due to OS issues and
      # recommends that CPU-intensive works run with 46 or less
      # cores. As 45 is a multiple of 3, it's the best value
      # that doesn't waste too much
      #set NCPUS_PER_NODE = 48
      set NCPUS_PER_NODE = 45
   endif

else if ( $SITE == 'NAS' ) then

   echo "Enter the ${C1}Processor Type${CN} you wish to run on:"
   echo "   ${C2}bro (Broadwell)${CN}"
   echo "   ${C2}sky (Skylake)${CN}"
   echo "   ${C2}cas (Cascade Lake)${CN}"
   echo "   ${C2}rom (AMD Rome) (default)${CN}"
   echo "   ${C2}mil (AMD Milan)${CN}"
   echo "   ${C2}tur (AMD Turin)${CN}"
   echo " "
   set MODEL = `echo $<`
   set MODEL = `echo $MODEL | tr "[:upper:]" "[:lower:]"`
   if ( .$MODEL == .) then
      set MODEL = 'rom'
   endif

   if( $MODEL != 'bro' & \
       $MODEL != 'sky' & \
       $MODEL != 'cas' & \
       $MODEL != 'rom' & \
       $MODEL != 'mil' & \
       $MODEL != 'tur' ) goto ASKPROC

   # Some processors have weird names at NAS
   # ---------------------------------------

   if ($MODEL == bro) then
      set MODEL = 'bro_ele'
   else if ($MODEL == sky) then
      set MODEL = 'sky_ele'
   else if ($MODEL == cas) then
      set MODEL = 'cas_ait'
   else if ($MODEL == rom) then
      set MODEL = 'rom_ait'
   else if ($MODEL == mil) then
      set MODEL = 'mil_ait'
   else if ($MODEL == tur) then
      set MODEL = 'tur_ath'
   endif

   if ($MODEL == 'bro_ele') then
      set NCPUS_PER_NODE = 28
   else if ($MODEL == 'sky_ele') then
      set NCPUS_PER_NODE = 40
   else if ($MODEL == 'cas_ait') then
      set NCPUS_PER_NODE = 40
   else if ($MODEL == 'rom_ait') then
      set NCPUS_PER_NODE = 128
   else if ($MODEL == 'mil_ait') then
      set NCPUS_PER_NODE = 128
   else if ($MODEL == 'tur_ath') then
      set NCPUS_PER_NODE = 256
   endif

else if( $SITE == 'AWS' | $SITE == 'Azure' ) then

   # Because we do not know the name of the model or the number of CPUs
   # per node. We ask the user to set these variables in the script

   # AWS and Azure users must set the MODEL and NCPUS_PER_NODE
   set MODEL = USER_MUST_SET
   set NCPUS_PER_NODE = USER_MUST_SET

   # Above we need a user to set the MODEL and NCPUS_PER_NODE
   # variables. Here we check that they have been set. If not,
   # we ask the user to set them
   # --------------------------------------------------------

   if ( $MODEL == USER_MUST_SET | $NCPUS_PER_NODE == USER_MUST_SET ) then
      echo "ERROR: We have detected you are on $SITE. As we do not have"
      echo "       official fixed node info yet, we ask you to edit $0"
      echo "       and set the MODEL and NCPUS_PER_NODE variables."
      echo "       Look for the section that says:"
      echo " "
      echo "       # AWS and Azure users must set the MODEL and NCPUS_PER_NODE"
      exit 1
   endif

else
   set MODEL = 'UNKNOWN'
   # As we do not know how many CPUs per node, we detect the number
   # of CPUs per node by looking at the number of CPUs. This is different
   # on Linux and macOS
   if ( $ARCH == 'Linux' ) then
      set NCPUS_PER_NODE = `grep -c ^processor /proc/cpuinfo`
   else if ( $ARCH == 'Darwin' ) then
      set NCPUS_PER_NODE = `sysctl -n hw.ncpu`
   else
      echo "ERROR: Unknown architecture $ARCH"
      exit 1
   endif
endif

#######################################################################
#                         Check for COUPLED Ocean
#######################################################################

OGCM:
echo "Do you wish to run the ${C1}COUPLED${CN} Ocean/Sea-Ice Model? (Default: ${C2}NO${CN} or ${C2}FALSE${CN})"
set   OGCM  = $<
if( .$OGCM == . ) then
set   OGCM  = FALSE
else
set   OGCM  = `echo   $OGCM | tr "[:lower:]" "[:upper:]"`
if(  $OGCM == "Y"     | \
     $OGCM == "YES"   | \
     $OGCM == "T"     | \
     $OGCM == "TRUE"  ) set OGCM = TRUE
if(  $OGCM == "N"     | \
     $OGCM == "NO"    | \
     $OGCM == "F"     | \
     $OGCM == "FALSE" ) set OGCM = FALSE

if( $OGCM != TRUE & $OGCM != FALSE ) then
echo
echo "${C1}COUPLED${CN} must be set equal to TRUE or FALSE!"
goto  OGCM
else
echo
endif
endif

set MPT_SHEPHERD = ""
if( $OGCM == TRUE ) then

    set COUPLED   = ""
    set DATAOCEAN = "#DELETE"
    set OCEAN_NAME = ""
    set OCEAN_PRELOAD = ""
    set SEAICE_NAME = ""
    set SEAICE_PRELOAD = ""

    # Ocean Model
    # -----------
    OCNMODEL:
    echo "Choose an ${C1}Ocean Model${CN}: (Default: ${C2}MOM6${CN})"
    echo "   ${C2}MOM5${CN}"
    echo "   ${C2}MOM6${CN}"
    echo "   ${C2}MIT${CN}"

    set OCNMODEL  = $<
    if ( .$OCNMODEL == . ) then
       set OCNMODEL  = "MOM6"
    else
       set OCNMODEL = `echo $OCNMODEL | tr "[:lower:]" "[:upper:]"`

       if ( "$OCNMODEL" != "MOM5" & "$OCNMODEL" != "MOM6"  & "$OCNMODEL" != "MIT") then
          echo
          echo "${C1}Ocean Model${CN} must be either MOM5, MOM6 or MIT!"
          goto OCNMODEL
       else
          echo
       endif
    endif

    # NOTE: We use a CMake variable here because the shared library
    # suffix is different on Linux and macOS. This is set by configure_file()
    if ( "$OCNMODEL" == "MOM5" ) then
       set OCEAN_NAME="MOM"
       set OGRIDTYP  = "M5TP"
       set OCEAN_PRELOAD = 'env @PRELOAD_COMMAND=$GEOSDIR/lib/libmom@CMAKE_SHARED_LIBRARY_SUFFIX@'
       set MOM5=""
       set MOM6 = "#DELETE"
       set DEFAULT_HISTORY_TEMPLATE="HISTORY.AOGCM-MOM5.rc.tmpl"

       set mom5_warning="######################################################\nYou (user) have chosen to set up a coupled model experiment with MOM5.\nBe aware that such a set up is _known_ to have problems. See following for more details.\nhttps://github.com/GEOS-ESM/MOM5/issues/19\nIf your intent is to help _fix_ above issue, your help is much appreciated. Thank you and good luck!\nOtherwise, until this above issue is _fixed_ you are on your own with above choice.\n######################################################"
       echo "\033[31;5m"${mom5_warning}"\033[0m"
       set MIT  = "#DELETE"
    else if ( "$OCNMODEL" == "MOM6" ) then
       set OCEAN_NAME="MOM6"
       set OGRIDTYP  = "M6TP"
       set OCEAN_PRELOAD = 'env @PRELOAD_COMMAND=\$GEOSDIR/lib/libmom6@CMAKE_SHARED_LIBRARY_SUFFIX@'
       set MOM6=""
       set MOM5 = "#DELETE"
       set DEFAULT_HISTORY_TEMPLATE="HISTORY.AOGCM.rc.tmpl"
       set MIT  = "#DELETE"
    else if ( "$OCNMODEL" == "MIT" ) then
       set OCEAN_NAME="MIT"
       set OGCM_GRID_TYPE = llc
       set OGRIDTYP  = "MITLLC"
       set MIT = ""
       set DEFAULT_HISTORY_TEMPLATE="HISTORY.AOGCM_MITgcm.rc.tmpl"
       set MOM5 = "#DELETE"
       set MOM6 = "#DELETE"
    endif

    # Coupled Ocean Resolution
    # ------------------------
    CORSLV:
    if( "$OCNMODEL" == "MIT" ) then
        if ( $AGCM_IM != "c90" ) then
            echo "You MUST select c90 atmospheric resolution for MIT ocean!"
            exit 1
        endif
        set OGRIDTYP = "MITLLC"
        set OGCM_JM = 15
        set OGCM_IM = `expr $OGCM_JM \* 360`

    else if ( $OCEAN_NAME == "MOM" ) then
        set Resolution = `echo 360 200`
        echo "Enter the Ocean Lat/Lon ${C1}Horizontal Resolution${CN}: ${C2}IM JM${CN} (Default:" $Resolution")"
        set Resolution = `echo $<`
        set num = $#Resolution
        if( $num == 2 ) then
           set OGCM_IM = $Resolution[1]
           set OGCM_JM = $Resolution[2]
        else
           set Resolution = `echo 360 200`

           if( $num == 0 ) then
              set OGCM_IM = $Resolution[1]
              set OGCM_JM = $Resolution[2]
           else
              goto CORSLV
           endif
        endif

    else if ( "$OCNMODEL" == "MOM6" ) then
       # For MOM6 we currently have only 3 allowed ocean resolutions based on the
       # atmospheric resolution. The allowed are:
       #
       # Atm Res  Atm NXxNY  Atm IMxJM  Ocean NXxNY  Ocean IMxJM  Ocean LM
       # -------  ---------  ---------  -----------  -----------  --------
       # c12      1x6        12x72      3x2          72x36        50
       # c90      5x36       90x540     90x2         540x458      50
       # c180     30x36      180x1080   36x30        1440x1080    75
       #
       # See https://github.com/GEOS-ESM/GEOSgcm/wiki/Coupled-model-configurations-(GEOS-MOM6)

       if ( $AGCM_IM == "c12" ) then
          set OGCM_NX = 3
          set OGCM_NY = 2
          set OGCM_IM = 72
          set OGCM_JM = 36
          set OGCM_LM = 50
       else if ( $AGCM_IM == "c90" ) then
          set OGCM_NX = 90
          set OGCM_NY = 2
          set OGCM_IM = 540
          set OGCM_JM = 458
          set OGCM_LM = 50
       else if ( $AGCM_IM == "c180" ) then
          set OGCM_NX = 36
          set OGCM_NY = 30
          set OGCM_IM = 1440
          set OGCM_JM = 1080
          set OGCM_LM = 75
       else
          echo
          echo "ERROR: MOM6 is currently only supported for c12, c90, and c180 atmospheric resolutions"
          exit 1
       endif
    endif

    set IMO = ${OGCM_IM}
    if( $IMO < 10 ) then
       set IMO = 000$IMO
    else if($IMO < 100) then
       set IMO = 00$IMO
    else if($IMO < 1000) then
       set IMO = 0$IMO
    endif

    set JMO = ${OGCM_JM}
    if( $JMO < 10 ) then
       set JMO = 000$JMO
    else if($JMO < 100) then
       set JMO = 00$JMO
    else if($JMO < 1000) then
       set JMO = 0$JMO
    endif

    set OCEAN_RES = ${OGRIDTYP}${IMO}x${JMO}
    set OCEAN_TAG  = Reynolds
    set SSTNAME  = "#DELETE"
    set SSTFILE  = "#DELETE"
    set ICEFILE  = "#DELETE"
    set KPARFILE = SEAWIFS_KPAR_mon_clim.${OGCM_IM}x${OGCM_JM}
    set OSTIA    = "#DELETE"
    set OCEANOUT = "#DELETE"

    # Seaice Model
    # -----------
    SEAICEMODEL:
    echo "Choose a ${C1}Seaice Model${CN}: (Default: ${C2}CICE6${CN})"
    echo "   ${C2}CICE4${CN}"
    echo "   ${C2}CICE6${CN}"

    set SEAICEMODEL  = $<
    if ( .$SEAICEMODEL == . ) then
       set SEAICEMODEL  = "CICE6"
    else
       set SEAICEMODEL = `echo $SEAICEMODEL | tr "[:lower:]" "[:upper:]"`

       if ( $SEAICEMODEL != "CICE4" & $SEAICEMODEL != "CICE6" ) then
          echo
          echo "${C1}Seaice Model${CN} must be either CICE4 or CICE6!"
          goto SEAICEMODEL
       else
          echo
       endif
    endif

    # NOTE: We use a CMake variable here because the shared library
    # suffix is different on Linux and macOS. This is set by configure_file()
    if ( $SEAICEMODEL == "CICE4" ) then
       set SEAICE_NAME="CICE4"
       set SEAICE_PRELOAD = '$GEOSDIR/lib/libCICE4@CMAKE_SHARED_LIBRARY_SUFFIX@'
       set CICE4=""
       set CICE6 = "#DELETE"
       set HIST_CICE4 = ""
    else if ( $SEAICEMODEL == "CICE6" ) then
       set SEAICE_NAME="CICE6"
       set SEAICE_PRELOAD = '$GEOSDIR/lib/libcice6@CMAKE_SHARED_LIBRARY_SUFFIX@'
       set CICE6=""
       set CICE4 = "#DELETE"
       set HIST_CICE4 = "#DELETE"
    endif

    if ( $SEAICEMODEL == "CICE6" & $OCNMODEL != "MOM6" ) then
       echo
       echo "${C1}Ocean Model${CN} must be MOM6 when Seaice Model is CICE6!"
       goto OCNMODEL
    endif

    # combine seaice preload with ocean preload
    set OCEAN_PRELOAD = `echo ${OCEAN_PRELOAD}`:`echo ${SEAICE_PRELOAD}`


    # We only ask this if not MOM6
    if ( "$OCNMODEL" != "MOM6" ) then
       echo "Enter the Ocean Model ${C1}Vertical Resolution${CN}: ${C2}LM${CN} (Default: 50)"
       set   OGCM_LM = $<
       if( .$OGCM_LM == . ) then
          set   OGCM_LM = 50
       endif
       set OGCM_NX = 36
       set OGCM_NY = 10
    endif
    @   OGCM_NPROCS = $OGCM_NX * $OGCM_NY
    if ( "$OCNMODEL" != "MIT" ) then
       set OGCM_GRID_TYPE = Tripolar
    endif
    set LATLON_OGCM = ""
    set CUBE_OGCM = "#DELETE"
    set DATAOCEAN = "#DELETE"
    set OGCM_NF = 1

    if( "$OCNMODEL" == "MIT" ) then
        set OGCM_NX = 360
        set OGCM_NY = 1
        set OGCM_GRIDSPEC = mit.ascii
    endif

else

    # OGCM = FALSE (Data Ocean Resolution)
    # ------------------------------------
    DORSLV:
    echo "Enter the ${C1}Data_Ocean Horizontal Resolution ${CN}code: ${C2}o1${CN} (1  -deg,  360x180  Reynolds) Default"
    echo "                                                 ${C2}o2${CN} (1/4-deg, 1440x720  MERRA-2)"
    echo "                                                 ${C2}o3${CN} (1/8-deg, 2880x1440 OSTIA)"
    echo "                                                 ${C2}CS${CN} (Cubed-Sphere OSTIA)"
    set   HRCODE = `echo $<`
    if( .$HRCODE == . ) set HRCODE = o1
    set   HRCODE = `echo $HRCODE | tr "[:upper:]" "[:lower:]"`

    if( $HRCODE != 'o1' & \
        $HRCODE != 'o2' & \
        $HRCODE != 'o3' & \
        $HRCODE != 'cs' ) goto DORSLV
    if( $HRCODE == 'o1' ) then
        set Resolution = `echo  360  180`
        set OGCM_IM  = $Resolution[1]
        set OGCM_JM  = $Resolution[2]
        set OGCM_GRID_TYPE = LatLon
        set OGCM_NF = 1
        set OCEAN_TAG = Reynolds
        set SSTNAME  = SST
        set OCEANOUT = "360x180"
        set SSTFILE  = dataoceanfile_MERRA_sst_1971-current.${OGCM_IM}x${OGCM_JM}.LE
        set ICEFILE  = dataoceanfile_MERRA_fraci_1971-current.${OGCM_IM}x${OGCM_JM}.LE
        set KPARFILE = SEAWIFS_KPAR_mon_clim.${OGCM_IM}x${OGCM_JM}
        set OGRIDTYP = "DE"
        set LATLON_OGCM = ""
        set CUBE_OGCM = "#DELETE"
        set OSTIA    = "#DELETE"
        set DATAOCEAN = ""
    endif
    if( $HRCODE == 'o2' ) then
        set Resolution = `echo 1440 720`
        set OGCM_IM  = $Resolution[1]
        set OGCM_JM  = $Resolution[2]
        set OGCM_GRID_TYPE = LatLon
        set OGCM_NF = 1
        set OCEAN_TAG = MERRA-2
        set SSTNAME  = MERRA2
        set OCEANOUT = "1440x720"
        set SSTFILE  = dataoceanfile_MERRA2_SST.${OGCM_IM}x${OGCM_JM}.\${YEAR}.data
        set ICEFILE  = dataoceanfile_MERRA2_ICE.${OGCM_IM}x${OGCM_JM}.\${YEAR}.data
        set KPARFILE = SEAWIFS_KPAR_mon_clim.${OGCM_IM}x${OGCM_JM}
        set OGRIDTYP = "DE"
        set LATLON_OGCM = ""
        set CUBE_OGCM = "#DELETE"
        set OSTIA    = ""
        set DATAOCEAN = ""
    endif
    if( $HRCODE == 'o3' ) then
        set Resolution = `echo 2880 1440`
        set OGCM_IM  = $Resolution[1]
        set OGCM_JM  = $Resolution[2]
        set OGCM_GRID_TYPE = LatLon
        set OGCM_NF = 1
        set LATLON_OGCM = ""
        set CUBE_OGCM = "#DELETE"
        set OCEAN_TAG = Ostia
        set SSTNAME  = OSTIA_REYNOLDS
        set OCEANOUT = "2880x1440"
        set SSTFILE  = dataoceanfile_OSTIA_REYNOLDS_SST.${OGCM_IM}x${OGCM_JM}.\${YEAR}.data
        set ICEFILE  = dataoceanfile_OSTIA_REYNOLDS_ICE.${OGCM_IM}x${OGCM_JM}.\${YEAR}.data
        set KPARFILE = SEAWIFS_KPAR_mon_clim.${OGCM_IM}x${OGCM_JM}
        set OGRIDTYP = "DE"
        set OSTIA    = ""
        set DATAOCEAN = ""
    endif
    if( $HRCODE == 'cs' ) then
        if( $LOW_ATM_RES == 'FALSE') then
             set OGCM_IM  = `echo $AGCM_IM | cut -b2-`
             set OGCM_JM  = `expr $OGCM_IM \* 6`
             set Resolution = `echo $OGCM_IM $OGCM_JM`
             set OGCM_IM  = $Resolution[1]
             set OGCM_JM  = $Resolution[2]
             set OGCM_GRID_TYPE = Cubed-Sphere
             set OGCM_NF = 6
             set LATLON_OGCM = "#DELETE"
             set CUBE_OGCM = ""
             set DATAOCEAN = "#DELETE"

             set OCEAN_TAG = Ostia
             set SSTNAME  = OSTIA_REYNOLDS
             set OCEANOUT = "CS"
             set SSTFILE  = dataoceanfile_OSTIA_REYNOLDS_SST.${OGCM_IM}x${OGCM_JM}.\${YEAR}.data
             set ICEFILE  = dataoceanfile_OSTIA_REYNOLDS_ICE.${OGCM_IM}x${OGCM_JM}.\${YEAR}.data
             set KPARFILE = SEAWIFS_KPAR_mon_clim.${OGCM_IM}x${OGCM_JM}
             set OGRIDTYP = "CF"
             set OSTIA    = ""
        else
             echo "Error: Cubed-Sphere Ocean with ${AGCM_IM} not currently supported. Must be c90 or higher"
             exit 7
        endif
    endif

    set IMO = ${OGCM_IM}
    set JMO = ${OGCM_JM}

    if( $IMO < 10 ) then
         set IMO = 000$IMO
    else if($IMO < 100) then
         set IMO = 00$IMO
    else if($IMO < 1000) then
         set IMO = 0$IMO
    endif

    if( $JMO < 10 ) then
         set JMO = 000$JMO
    else if($JMO < 100) then
         set JMO = 00$JMO
    else if($JMO < 1000) then
         set JMO = 0$JMO
    endif

    if( $HRCODE == 'cs' ) then
        set OCEAN_RES =  CF${IMO}x6C
    else
        set OCEAN_RES =  DE${IMO}xPE${JMO}
    endif

    set DATAOCEAN = ""
    set OCEAN_NAME = ""
    set OCEAN_PRELOAD = ""
    set OGCM_LM   =  34
    set COUPLED   = "#DELETE"
    set MOM5      = "#DELETE"
    set MOM6      = "#DELETE"
    set CICE4     = "#DELETE"
    set CICE6     = "#DELETE"
    set HIST_CICE4 = "#DELETE"
    set OCNMODEL  = "Data Ocean (${HRCODE})"
    set DEFAULT_HISTORY_TEMPLATE="HISTORY.AGCM.rc.tmpl"
    set MIT       = "#DELETE"

    set OGCM_NX       = ""
    set OGCM_NY       = ""
    set OGCM_NPROCS   = ""
endif

# Check for Data Atmosphere
#--------------------------
set DATA_ATMOS = FALSE
set MODELATM = ""
set USE_DATA_ATM4OCN = .FALSE.

if( $OGCM == "TRUE" ) then

DATATMOS:
   echo "Do you wish to run ${C1}Data Atmosphere${CN}? (Default: ${C2}NO${CN} or ${C2}FALSE${CN})"
   set DATA_ATMOS = $<
   if (.$DATA_ATMOS == .) then
      set DATA_ATMOS = FALSE
   else
      set DATA_ATMOS = `echo $DATA_ATMOS | tr "[:lower:]" "[:upper:]"`
      if ($DATA_ATMOS == "Y"    | \
          $DATA_ATMOS == "YES"  | \
          $DATA_ATMOS == "T"    | \
          $DATA_ATMOS == "TRUE" ) set DATA_ATMOS = TRUE
      if ($DATA_ATMOS == "N"    | \
          $DATA_ATMOS == "NO"   | \
          $DATA_ATMOS == "F"    | \
          $DATA_ATMOS == "FALSE") set DATA_ATMOS = FALSE
      if ($DATA_ATMOS != TRUE & $DATA_ATMOS != FALSE) then
         echo
         echo "Please answer ${C2}YES${CN} or ${C2}NO${CN}!"
         goto DATATMOS
      endif
   endif

   if ($DATA_ATMOS == TRUE) then
      set MODELATM = "#DELETE"
      set USE_DATA_ATM4OCN = .TRUE.

      set DEFAULT_HISTORY_TEMPLATE = "HISTORY.DATAATM.rc.tmpl"
   endif
endif

# Set DEFAULT SHMEM Parameter
# ---------------------------
     set USE_SHMEM = 0

# Set IAU-Forcing and Bias Correction OFF
# ---------------------------------------
     set FORCEDAS = "#"
     set FORCEGCM = "#"

# Set Default Readers and Writers
# -------------------------------
     set NUM_READERS = 1
     set NUM_WRITERS = 1

# Set default CONVPAR_OPTION to GF
# (set to NONE at C2880 and C5760)
# --------------------------------
     set CONVPAR_OPTION = GF

# Default Run Parameters
# ----------------------
if( $AGCM_IM ==  "c12" ) then
     set       DT = 1800
     set SOLAR_DT = 3600
     set IRRAD_DT = 3600
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = $DT
     set AGCM_IM  = 12
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     # C12 MOM6 should be 1x6 to match the default 3x2 ocean layout
     if ( "$OCNMODEL" == "MOM6") then
        set    NX = 1
     else
        set    NX = 2
     endif
     set       NY = `expr $NX \* 6`
     set   HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set JOB_SGMT = 00000015
     set NUM_SGMT = 20
     set ATMOS_RES = CF0012x6C
     set POST_NDS = 4
endif
if( $AGCM_IM ==  "c24" ) then
     set       DT = 1800
     set SOLAR_DT = 3600
     set IRRAD_DT = 3600
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = $DT
     set AGCM_IM  = 24
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 4
     set       NY = `expr $NX \* 6`
     set   HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set JOB_SGMT = 00000015
     set NUM_SGMT = 20
     set ATMOS_RES = CF0024x6C
     set POST_NDS = 4
endif
if( $AGCM_IM ==  "c48" ) then
     set       DT = 1800
     set SOLAR_DT = 3600
     set IRRAD_DT = 3600
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = $DT
     set AGCM_IM  = 48
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 4
     set       NY = `expr $NX \* 6`
     set   HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = 180
     set HIST_JM  =  91
     set JOB_SGMT = 00000015
     set NUM_SGMT = 20
     set ATMOS_RES = CF0048x6C
     set POST_NDS = 4
endif
if( $AGCM_IM ==  "c90" ) then
     set       DT = 900
     set SOLAR_DT = 3600
     set IRRAD_DT = 3600
     set  LONG_DT = $DT
     set AGCM_IM  = 90
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     if( $OGCM == TRUE ) then
        if( "$OCNMODEL" == "MIT" ) then
           set  NX = 10
           set  NY = 36
        else if ( "$OCNMODEL" == "MOM6") then
           # For MOM6 c90 means atm NXxNY = 5x36
           set  NX = 5
           set  NY = 36
        else
           set  NX = $OGCM_NY
           set  NY = $OGCM_NX
        endif
        set OCEAN_DT = $DT
     else
        set  NX = 3
        set  NY = `expr $NX \* 6`
        set OCEAN_DT = $IRRAD_DT
     endif
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set JOB_SGMT = 00000032
     set NUM_SGMT = 4
     set ATMOS_RES = CF0090x6C
     set POST_NDS = 8
endif
if( $AGCM_IM ==  "c180" ) then
     set       DT = 600
     set SOLAR_DT = 3600
     set IRRAD_DT = 3600
     set  LONG_DT = $DT
     set AGCM_IM  = 180
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     if( $OGCM == TRUE ) then
        if ( "$OCNMODEL" == "MOM6") then
           # For MOM6 c180 means atm NXxNY = 30x36
           set  NX = 30
           set  NY = 36
        else
           set  NX = $OGCM_NY
           set  NY = $OGCM_NX
        endif
        set OCEAN_DT = $DT
     else
        set  NX = 6
        set  NY = `expr $NX \* 6`
        set OCEAN_DT = $IRRAD_DT
     endif
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 2
     set JOB_SGMT = 00000016
     set NUM_SGMT = 1
     set ATMOS_RES = CF0180x6C
     set POST_NDS = 8
endif
if( $AGCM_IM == "c360" ) then
     set       DT = 450
     set SOLAR_DT = 3600
     set IRRAD_DT = 3600
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = $DT
     set AGCM_IM  = 360
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 12
     set       NY = `expr $NX \* 6`
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 4
     set JOB_SGMT = 00000005
     set NUM_SGMT = 1
     set ATMOS_RES = CF0360x6C
     set POST_NDS = 12
endif
if( $AGCM_IM == "c720" ) then
     set       DT = 300
     set SOLAR_DT = 3600
     set IRRAD_DT = 3600
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = $DT
     set AGCM_IM  = 720
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 24
     set       NY = `expr $NX \* 6`
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 6
     set JOB_SGMT = 00000005
     set NUM_SGMT = 1
     set ATMOS_RES = CF0720x6C
     set POST_NDS = 16
     set USE_SHMEM = 1
endif
if( $AGCM_IM == "c1440" ) then
     set       DT = 150
     set SOLAR_DT = 1800
     set IRRAD_DT = 1800
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = 300
     set AGCM_IM  = 1440
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 48
     set       NY = `expr $NX \* 6`
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 6
     set JOB_SGMT = 00000001
     set NUM_SGMT = 1
     set ATMOS_RES = CF1440x6C
     set POST_NDS = 32
     set USE_SHMEM = 1
endif
if( $AGCM_IM == "c2880" ) then
     set       DT = 75
     set SOLAR_DT = 1800
     set IRRAD_DT = 1800
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = 300
     set AGCM_IM  = 2880
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 96
     set       NY = `expr $NX \* 6 \* 2`
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 6
     set JOB_SGMT = 00000001
     set NUM_SGMT = 1
     set ATMOS_RES = CF2880x6C
     set POST_NDS = 32
     set USE_SHMEM = 1
     set DEF_IOS_NDS = 4
     set CONVPAR_OPTION = NONE
endif
if( $AGCM_IM == "c5760" ) then
     set       DT = 45
     set SOLAR_DT = 900
     set IRRAD_DT = 900
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = 300
     set AGCM_IM  = 5760
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 192
     set       NY = `expr $NX \* 6`
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 6
     set JOB_SGMT = 00000001
     set NUM_SGMT = 1
     set ATMOS_RES = CF5760x6C
     set POST_NDS = 32
     set USE_SHMEM = 1
     set DEF_IOS_NDS = 4
     set CONVPAR_OPTION = NONE
endif
# CONUS Stretched Grids
set CONUS = '#'
set STRETCH_FACTOR = ""
if( $AGCM_IM == "c270" ) then
     set       DT = 600
     set SOLAR_DT = 3600
     set IRRAD_DT = 3600
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = $DT
     set AGCM_IM  = 270
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 8
     set       NY = `expr $NX \* 6 \* 2`
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 6
     set JOB_SGMT = 00000001
     set NUM_SGMT = 1
     set ATMOS_RES = CF0270x6C-SG001
     set POST_NDS = 32
     set USE_SHMEM = 1
     set CONUS = ''
     set STRETCH_FACTOR = 2.5
endif
if( $AGCM_IM == "c540" ) then
     set       DT = 300
     set SOLAR_DT = 3600
     set IRRAD_DT = 3600
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = $DT
     set AGCM_IM  = 540
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 14
     set       NY = `expr $NX \* 6 \* 2`
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 6
     set JOB_SGMT = 00000001
     set NUM_SGMT = 1
     set ATMOS_RES = CF0540x6C-SG001
     set POST_NDS = 32
     set USE_SHMEM = 1
     set CONUS = ''
     set STRETCH_FACTOR = 2.5
endif
if( $AGCM_IM == "c1080" ) then
     set       DT = 150
     set SOLAR_DT = 900
     set IRRAD_DT = 900
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = 300
     set AGCM_IM  = 1080
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 22
     set       NY = `expr $NX \* 6 \* 2`
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 6
     set JOB_SGMT = 00000001
     set NUM_SGMT = 1
     set ATMOS_RES = CF1080x6C-SG001
     set POST_NDS = 32
     set USE_SHMEM = 1
     set CONUS = ''
     set STRETCH_FACTOR = 2.5
endif
if( $AGCM_IM == "c1536" ) then
     set       DT = 75
     set SOLAR_DT = 900
     set IRRAD_DT = 900
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = 300
     set AGCM_IM  = 1536
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 36
     set       NY = `expr $NX \* 6 \* 2`
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 6
     set JOB_SGMT = 00000005
     set NUM_SGMT = 1
     set ATMOS_RES = CF1536x6C-SG002
     set POST_NDS = 16
     set USE_SHMEM = 1
     set CONUS = ''
     set STRETCH_FACTOR = 3.0
endif
if( $AGCM_IM == "c2160" ) then
     set       DT = 60
     set SOLAR_DT = 900
     set IRRAD_DT = 900
     set OCEAN_DT = $IRRAD_DT
     set  LONG_DT = 300
     set AGCM_IM  = 2160
     set AGCM_JM  = `expr $AGCM_IM \* 6`
     set       NX = 40
     set       NY = `expr $NX \* 6 \* 2`
     set HYDROSTATIC = $USE_HYDROSTATIC
     set HIST_IM  = `expr $AGCM_IM \* 4`
     set HIST_JM  = `expr $AGCM_IM \* 2 + 1`
     set NUM_READERS = 6
     set JOB_SGMT = 00000001
     set NUM_SGMT = 1
     set ATMOS_RES = CF2160x6C-SG001
     set POST_NDS = 32
     set USE_SHMEM = 1
     set CONUS = ''
     set STRETCH_FACTOR = 2.5
endif

set OGCM_IS_FCST = 0
set FVCUBED         = ""
set AGCM_GRIDNAME   = "PE${AGCM_IM}x${AGCM_JM}-CF"
if( ${OGRIDTYP} == 'CF' ) then
   set OGCM_GRIDNAME   = "OC${OGCM_IM}x${OGCM_JM}-${OGRIDTYP}"
else
    if( "$OCNMODEL" == "MIT" ) then
        set OGCM_GRIDNAME   = "${OGRIDTYP}${OGCM_IM}x${OGCM_JM}-${OGRIDTYP}"
    else
        set OGCM_GRIDNAME   = "PE${OGCM_IM}x${OGCM_JM}-${OGRIDTYP}"
    endif
endif
set BCSRES          = "${ATMOS_RES}_${OCEAN_RES}"
set RES_DATELINE    = '${AGCM_IM}x${AGCM_JM}'
set TILEDATA        = "${ATMOS_RES}_${OCEAN_RES}_Pfafstetter.til"
set TILEBIN         = "${ATMOS_RES}_${OCEAN_RES}_Pfafstetter.TIL"
if( $HIST_IM >= $OGCM_IM ) then
   set INTERPOLATE_SST = 1
else
   set INTERPOLATE_SST = 0
endif


set BEG_DATE =  '18910301 000000'
set END_DATE =  '29990302 210000'
set JOB_SGMT = "$JOB_SGMT 000000"


#######################################################################
#           Setting for Microphysics & Hydrostatic Mode               #
#######################################################################

set BACM_1M_ = "#"
if ( "$CLDMICRO" == "BACM_1M" ) then
   set BACM_1M_ = ""
endif

set GFDL_1M_ = "#"
if ( "$CLDMICRO" == "GFDL_1M" ) then
   set GFDL_1M_ = ""
endif

set MGB2_2M_ = "#"
if ( "$CLDMICRO" == "MGB2_2M" ) then
   set MGB2_2M_ = ""
endif

set GFDL_HYDRO = ".TRUE."
set GFDL_PROG_CCN = "prog_ccn = .true."
set GFDL_USE_CCN  = "use_ccn = .true."

# BACM_1M and GFDL do not use WSUB_CLIM, so this eliminates a regrid
if ( "$CLDMICRO" == "BACM_1M" | "$CLDMICRO" == "GFDL_1M" ) then
   set MP_TURN_OFF_WSUB_EXTDATA = ""
else
   set MP_TURN_OFF_WSUB_EXTDATA = "#DELETE#"
endif

# Settings for fvcore_layout.rc
if ( "$USE_HYDROSTATIC" == "TRUE" ) then
   set FV_MAKENH     = "Make_NH     = .F."
   set FV_HYDRO      = "hydrostatic = .T."
   set FV_HWT        = '#'
else
   set FV_MAKENH     = "Make_NH     = .T."
   set FV_HYDRO      = "hydrostatic = .F."
   if ( "$CLDMICRO" == "GFDL_1M" ) then
      set GFDL_HYDRO = ".FALSE."
   endif
   # Enable FV3_CONFIG: HWT when running non-hydrostatic
   set FV_HWT        = ''
endif

if ($CONUS == '#') then
  set SCHMIDT     = "do_schmidt  = .false."
  set STRETCH_FAC = "stretch_fac = 1.0"
  set TARGET_LON  = "target_lon  = 0.0"
  set TARGET_LAT  = "target_lat  = -90.0"
else
  set SCHMIDT     = "do_schmidt  = .true."
  set STRETCH_FAC = "stretch_fac = $STRETCH_FACTOR"
  set TARGET_LON  = "target_lon  = -98.35"
  set TARGET_LAT  = "target_lat  = 39.5"
  # Always enable FV3_CONFIG: HWT for CONUS
  set FV_HWT        = ''
endif

#######################################################################
#           Check for land surface and runoff routing  models         #
#######################################################################

# Enter Land Surface Model Boundary Conditions
# -----------------------------------------------------------
LSM_BCS:

# If we are running DATA_ATMOS, we can skip the Land bits, but we must still fill
# things out with something. So we use the default Land settings.

if ($DATA_ATMOS == TRUE) then
  set LSM_BCS = "NL3"
  set LSM_CHOICE  = 1
  set LSM_BCS      = "NL3"
  set LSM_PARMS    = ""
  set EMIP_BCS_IN  = "NL3"
  set EMIP_OLDLAND = "#DELETE"
  set EMIP_NEWLAND = ""
  set EMIP_MERRA2  = "MERRA2_NewLand"
  set HIST_CATCHCN   = "#DELETE"
  set GCMRUN_CATCHCN = "#DELETE"
else

echo "Enter the choice of ${C1} Land Surface Boundary Conditions${CN} using: ${C2}ICA${CN} (Icarus), ${C2}NL3${CN} (Default: Icarus-NLv3), or ${C2}v12${CN}"
set   LSM_BCS  = $<
if( .$LSM_BCS == . ) set LSM_BCS = "NL3"
if( `echo $LSM_BCS | tr '[:upper:]' '[:lower:]'` == "ica" ) then
    set LSM_BCS      = "ICA"
    set LSM_PARMS    = "#DELETE"
    set EMIP_BCS_IN  = "GM4"
    set EMIP_OLDLAND = ""
    set EMIP_NEWLAND = "#DELETE"
    set EMIP_MERRA2  = "MERRA2"
else if( `echo $LSM_BCS | tr '[:upper:]' '[:lower:]'` == "nl3" ) then
    set LSM_BCS      = "NL3"
    set LSM_PARMS    = ""
    set EMIP_BCS_IN  = "NL3"
    set EMIP_OLDLAND = "#DELETE"
    set EMIP_NEWLAND = ""
    set EMIP_MERRA2  = "MERRA2_NewLand"
else if( `echo $LSM_BCS | tr '[:upper:]' '[:lower:]'` == "v12" ) then
    set LSM_BCS      = "v12"
    set LSM_PARMS    = ""
    set EMIP_BCS_IN  = "NL3"
    set EMIP_OLDLAND = "#DELETE"
    set EMIP_NEWLAND = ""
    set EMIP_MERRA2  = "MERRA2_NewLand"
else
    echo
    echo "${C1} Land Surface Boundary Conditions${CN} must be set equal to ${C2}ICA (Icarus)${CN}, ${C2}NL3 (Icarus-NLv3)${CN}, or ${C2}v12${CN}!"
    goto LSM_BCS
endif

# Enter Catch-Carbon
# ----------------------
LSM_CHOICE:
echo "Enter the choice of ${C1} Land Surface Model${CN} using: ${C2}1${CN} (Default: Catchment) or ${C2}2${CN} (CatchmentCN-CLM4.0 (CN_CLM40))"
set   LSM_CHOICE = $<
if( .$LSM_CHOICE == . ) set LSM_CHOICE  = 1
if(  $LSM_CHOICE != 1 & $LSM_CHOICE != 2 ) then
    echo
    echo "${C1} Catchment Model${CN} must be set equal to ${C2}1${CN} or ${C2}2${CN}!"
    goto LSM_CHOICE
else
    echo
endif
if( $LSM_CHOICE == 1 ) then
    set HIST_CATCHCN   = "#DELETE"
    set GCMRUN_CATCHCN = "#DELETE"
else if( $LSM_CHOICE == 2 ) then
    set HIST_CATCHCN   = ""
    set GCMRUN_CATCHCN = ""
endif

endif # DATA_ATMOS

#######################################################################
#                   Check for AEROSOL/Chemistry Models
#######################################################################

# Check for GOCART
# ----------------
GOCART:

# If we are running DATA_ATMOS, we can skip the GOCART bits, but we must still fill
# things out with something. So we use the climatological aerosols settings so
# the sed scripts don't get confused.
if ($DATA_ATMOS == TRUE) then
   set GOKART           = FALSE
   set DATA_DRIVEN      = FALSE
   set AERO_PROVIDER    = GOCART2G
   set EMISSIONS        = ""
   set GOCART           = "#"
   set HIST_GOCART      = ""
   set OPS_SPECIES      = "#"
   set CMIP_SPECIES     = "#"
   set MERRA2OX_SPECIES = "#"
   set PCHEM_CLIM_YEARS = ""
   set OX_RELAXTIME     = 0.0
else

echo "Do you wish to run ${C1}GOCART${CN} with ${C2}Actual${CN} or ${C2}Climatological${CN} Aerosols? (Enter: ${C2}A${CN} (Default) or ${C2}C${CN})"
set   DATA_DRIVEN  = $<
if( .$DATA_DRIVEN == . ) set  DATA_DRIVEN  = A
set   DATA_DRIVEN  = `echo   $DATA_DRIVEN | tr "[:lower:]" "[:upper:]"`
if(  $DATA_DRIVEN != 'A'   & $DATA_DRIVEN != 'C' ) then
      echo
      echo "${C1}GOCART${CN} must be set equal to ${C2}A${CN} or ${C2}C${CN}!"
      goto GOCART
else
      echo
endif

if(  $DATA_DRIVEN == "A" ) set DATA_DRIVEN = FALSE    # Use Actual         Aerosols
if(  $DATA_DRIVEN == "C" ) set DATA_DRIVEN = TRUE     # Use Climatological Aerosols

# Default setup for linkbcs emissions
set OPS_SPECIES      = "#"
set CMIP_SPECIES     = "#"
set MERRA2OX_SPECIES = "#"
set PCHEM_CLIM_YEARS = ""

set AERO_PROVIDER   = GOCART2G

if( $DATA_DRIVEN == FALSE ) then

   set GOCART          = ""
   set HIST_GOCART     = ""

else

   set  GOCART          = "#"
   set  HIST_GOCART     = "#DELETE"

endif

# Emission Files
# --------------
EMISSIONS:
     set   EMISSIONS = ''
     echo "Enter the GOCART ${C1}Emission Files${CN} to use: ${C2}AMIP${CN} (Default) or ${C2}OPS${CN}:"
     set   EMISSIONS = $<
     if( .$EMISSIONS == . ) then
     set   EMISSIONS = AMIP
     else
     set   EMISSIONS = `echo   $EMISSIONS | tr "[:lower:]" "[:upper:]"`
     if(  $EMISSIONS != OPS & $EMISSIONS != AMIP) then
     echo
     echo "${C1}Emission Files${CN} must be equal to:  ${C2}AMIP${CN} or ${C2}OPS${CN}!"
     goto EMISSIONS
     else
     echo
     endif
     endif

     set EMISSIONS = ${EMISSIONS}_EMISSIONS

     # Fix up the linkbcs species.data
     # NOTE: If OPS is selected, EMISSIONS is blanked
     if(  $EMISSIONS == OPS_EMISSIONS ) then
        set OPS_SPECIES = ''
        set PCHEM_CLIM_YEARS = 1
        set OX_RELAXTIME = 0.00
     else
        set MERRA2OX_SPECIES = ''
        set PCHEM_CLIM_YEARS = 39
        set OX_RELAXTIME = 259200.
     endif

endif # DATA_ATMOS

# RATS Provider
# -------------
set  RATS_PROVIDER   = PCHEM

# Additional RATS settings for specific GHGs
# ------------------------------------------
set CH4_PROVIDER     = none
set CO2_PROVIDER     = none

#######################################################################
#                  Confirm HEARTBEAT time for the model
#######################################################################

# Per W. Putman recommendation, set heartbeat to 450s anytime BACM_1M is selected
if( "$CLDMICRO" == "BACM_1M" ) then
   set DT = 450
   set LONG_DT = 450
endif

ASKHB:
echo "Enter ${C1}HEARTBEAT_DT${CN} to use"
echo "   ${C2}1. Hit ENTER to use the recommended default of ${DT} ${CN}"
echo "   ${C2}2. Type an integer (in seconds) to overide the default value ${CN}"

set    HEARTBEAT =  $<
if(  .$HEARTBEAT == . ) then
   set HEARTBEAT =  $DT
else
   set HEARTBEAT = `echo $HEARTBEAT | awk '{print ($0+0)}'`
   if ( ! $HEARTBEAT > 0 ) then
      echo
      echo "${C1}HEARTBEAT${CN} must be a valid integer using one of the options below!"
      goto ASKHB
   endif
endif

set DT = $HEARTBEAT

# For now, in a coupled run, the ocean model must have the same time step as the atmosphere
if( "$OGCM" == "TRUE" ) then
   set OCEAN_DT = $HEARTBEAT
endif

#######################################################################
#                    Create Desired HISTORY template
#######################################################################

onintr TRAP

    set check =  FALSE
while( $check == FALSE )

  echo "Enter the filename of the ${C1}HISTORY template${CN} to use"
  echo "-----------------------------------------------------------"
  echo "As ${OCNMODEL} was chosen, the default HISTORY Template is ${C2}${DEFAULT_HISTORY_TEMPLATE}${CN}"
  echo "  1. Hit ENTER to use the default HISTORY template (${C2}${DEFAULT_HISTORY_TEMPLATE}${CN}) or"
  echo "  2. Type the full path of the HISTORY template to use"

  set   HISTORY_TEMPLATE  = $<
  if( .$HISTORY_TEMPLATE == . ) then
     set HISTORY_TEMPLATE = ${DEFAULT_HISTORY_TEMPLATE}
  endif

  set TMPHIST = `mktemp`

  # Check to see if the HISTORY template exists in the $ETCDIR
  if( -f $ETCDIR/$HISTORY_TEMPLATE ) then
     set check = TRUE
     /bin/cp -f $ETCDIR/$HISTORY_TEMPLATE $TMPHIST
  # else check if the file exists (assuming they sent in full path)
  else if( -e $HISTORY_TEMPLATE ) then
     set check = TRUE
     /bin/cp -f $HISTORY_TEMPLATE $TMPHIST
  else
     echo "Error: Could not find ${RED}${HISTORY_TEMPLATE}${RESET}"
     echo ""
     set check = FALSE
  endif
end

echo ""
echo "Using ${C2}${HISTORY_TEMPLATE}${CN}"

#######################################################################
#                  Architecture Specific Variables
#######################################################################

@ MODEL_NPES = $NX * $NY

# Calculate OSERVER nodes based on recommended algorithm
if ( $DO_IOS == TRUE ) then

   # In the calculations below, the weird bc-awk command is to round up the floating point calcs

   # First we calculate the number of model nodes
   set NUM_MODEL_NODES=`echo "scale=6;($MODEL_NPES / $NCPUS_PER_NODE)" | bc | awk 'function ceil(x, y){y=int(x); return(x>y?y+1:y)} {print ceil($1)}'`

   # Next the number of frontend PEs is 10% of the model PEs
   set NUM_FRONTEND_PES=`echo "scale=6;($MODEL_NPES * 0.1)" | bc | awk 'function ceil(x, y){y=int(x); return(x>y?y+1:y)} {print ceil($1)}'`

   # Now we roughly figure out the number of collections in the HISTORY.rc (this is not perfect, but is close to right)
   set NUM_HIST_COLLECTIONS=`cat $TMPHIST | sed -n '/^COLLECTIONS:/,/^ *::$/{p;/^ *::$/q}' | grep -v '^ *#' | wc -l`

   # And the total number of oserver PEs is frontend PEs plus number of history collections
   @ NUM_OSERVER_PES=$NUM_FRONTEND_PES + $NUM_HIST_COLLECTIONS

   # Now calculate the number of oserver nodes
   set NUM_OSERVER_NODES=`echo "scale=6;($NUM_OSERVER_PES / $NCPUS_PER_NODE)" | bc | awk 'function ceil(x, y){y=int(x); return(x>y?y+1:y)} {print ceil($1)}'`

   # And then the number of backend PEs is the number of history collections divided by the number of oserver nodes
   set NUM_BACKEND_PES=`echo "scale=6;($NUM_HIST_COLLECTIONS / $NUM_OSERVER_NODES)" | bc | awk 'function ceil(x, y){y=int(x); return(x>y?y+1:y)} {print ceil($1)}'`

   # multigroup requires at least two backend pes
   if ($NUM_BACKEND_PES < 2) set NUM_BACKEND_PES = 2

   # Next calculate the number of frontend PEs
   @ NUM_FRONTEND_PES=$NCPUS_PER_NODE - $NUM_BACKEND_PES

   # If models pes is less than frontend, then we need to reduce frontend by increasing backend
   if ($MODEL_NPES < $NUM_FRONTEND_PES) then
      @ NUM_FRONTEND_PES=$MODEL_NPES - 2
      @ NUM_BACKEND_PES=$NCPUS_PER_NODE - $NUM_FRONTEND_PES
   endif

   # Calculate the total number of nodes to request from batch
   @ NODES=$NUM_MODEL_NODES + $NUM_OSERVER_NODES

else
   # Calculate the number of model nodes
   set NODES=`echo "scale=6;($MODEL_NPES / $NCPUS_PER_NODE)" | bc | awk 'function ceil(x, y){y=int(x); return(x>y?y+1:y)} {print ceil($1)}'`

   set NUM_OSERVER_NODES = 0
   set NUM_BACKEND_PES   = 0
endif

# Here we need to convert POST_NDS to total tasks. Using 16 cores
# per task as a good default
@ POST_NPES = $POST_NDS * 16

# Longer job names are now supported with SLURM and PBS. Limits seem to be 1024 characters with SLURM
# and 230 with PBS. To be safe, we will limit to 200

              setenv     RUN_N  `echo $EXPID | cut -b1-200`_RUN                         # RUN      Job Name
              setenv     RUN_FN `echo $EXPID | cut -b1-200`_FCST                        # Forecast Job Name
              setenv    POST_N  `echo $EXPID | cut -b1-199`_POST                        # POST     Job Name
              setenv    PLOT_N  `echo $EXPID | cut -b1-200`_PLT                         # PLOT     Job Name
              setenv    MOVE_N  `echo $EXPID | cut -b1-200`_MOVE                        # MOVE     Job Name
              setenv ARCHIVE_N  `echo $EXPID | cut -b1-199`_ARCH                        # ARCHIVE  Job Name
              setenv REGRESS_N  `echo $EXPID | cut -b1-199`_RGRS                        # REGRESS  Job Name

setenv BOUNDARY_DIR ""

if( $SITE == 'NAS' ) then
              setenv BATCH_CMD "qsub"                 # PBS Batch command
              setenv BATCH_GROUP "PBS -W group_list=" # PBS Syntax for GROUP
              setenv BATCH_TIME "PBS -l walltime="    # PBS Syntax for walltime
              setenv BATCH_JOBNAME "PBS -N "          # PBS Syntax for job name
              setenv BATCH_OUTPUTNAME "PBS -o "       # PBS Syntax for job output name
              setenv BATCH_JOINOUTERR "PBS -j oe -k oed"  # PBS Syntax for joining output and error
              setenv     RUN_FT "6:00:00"             # Wallclock Time   for gcm_forecast.j
              setenv     RUN_T  "8:00:00"             # Wallclock Time   for gcm_run.j
              setenv    POST_T  "8:00:00"             # Wallclock Time   for gcm_post.j
              setenv    PLOT_T  "8:00:00"             # Wallclock Time   for gcm_plot.j
              setenv ARCHIVE_T  "8:00:00"             # Wallclock Time   for gcm_archive.j
              set QTYPE = "normal"                    # Queue to use

              @ NPCUS = `echo "($POST_NPES + $NCPUS_PER_NODE - 1)/$NCPUS_PER_NODE" | bc`

              setenv     RUN_Q  "PBS -q ${QTYPE}"                                                                          # batch queue name for gcm_run.j
              setenv     RUN_P  "PBS -l select=${NODES}:ncpus=${NCPUS_PER_NODE}:mpiprocs=${NCPUS_PER_NODE}:model=${MODEL}" # PE Configuration for gcm_run.j
              setenv    RUN_FP  "PBS -l select=24:ncpus=${NCPUS_PER_NODE}:mpiprocs=${NCPUS_PER_NODE}:model=${MODEL}"       # PE Configuration for gcm_forecast.j
              setenv    POST_Q  "PBS -q normal"                                                                            # batch queue name for gcm_post.j
              setenv    PLOT_Q  "PBS -q normal"                                                                            # batch queue name for gcm_plot.j
              setenv    MOVE_Q  "PBS -q normal"                                                                            # batch queue name for gcm_moveplot.j
              setenv ARCHIVE_Q  "PBS -q normal"                                                                            # batch queue name for gcm_archive.j
              setenv    POST_P  "PBS -l select=${NPCUS}:ncpus=${NCPUS_PER_NODE}:mpiprocs=${NCPUS_PER_NODE}:model=${MODEL}" # PE Configuration for gcm_post.j
              setenv    PLOT_P  "PBS -l select=1:ncpus=${NCPUS_PER_NODE}:mpiprocs=1:model=${MODEL}"                        # PE Configuration for gcm_plot.j
              setenv ARCHIVE_P  "PBS -l select=1:ncpus=${NCPUS_PER_NODE}:mpiprocs=${NCPUS_PER_NODE}:model=${MODEL}"        # PE Configuration for gcm_archive.j
              setenv    MOVE_P  "PBS -l select=1:ncpus=1"                                                                  # PE Configuration for gcm_moveplot.j

              setenv BOUNDARY_DIR /nobackup/gmao_SIteam/ModelData
              setenv BC_BASE ${BOUNDARY_DIR}/bcs_shared/fvInput/ExtData/esm/tiles
              setenv BCSDIR  ${BC_BASE}/${LSM_BCS}                                                                         # location of Boundary Conditions
              setenv REPLAY_ANA_EXPID    ONLY_MERRA2_SUPPORTED                                                             # Default Analysis Experiment for REPLAY
              setenv REPLAY_ANA_LOCATION ONLY_MERRA2_SUPPORTED                                                             # Default Analysis Location   for REPLAY
              setenv M2_REPLAY_ANA_LOCATION ${BOUNDARY_DIR}/merra2/data                                                    # Default Analysis Location   for M2 REPLAY

              if( ${OGCM_IM}x${OGCM_JM} == "1440x720" ) then
                   setenv SSTDIR     ${BOUNDARY_DIR}/fvInput/g5gcm/bcs/SST/${OGCM_IM}x${OGCM_JM}  # location of SST Boundary Conditions
              else
                   setenv SSTDIR     ${BOUNDARY_DIR}/fvInput/g5gcm/bcs/realtime/@SSTNAME/${OGCM_IM}x${OGCM_JM}  # location of SST Boundary Conditions
              endif
              if (${OGRIDTYP} == "MITLLC") then
                setenv SSTDIR /nobackupp2/estrobac/geos5/SSTDIR
              endif
              setenv CHMDIR     ${BOUNDARY_DIR}/fvInput_nc3                            # locations of Aerosol Chemistry BCs
              setenv WRKDIR     /nobackup/$LOGNAME                                     # user work directory
              setenv COUPLEDIR  ${BOUNDARY_DIR}/bcs_shared/make_bcs_inputs/ocean       # Coupled Ocean/Atmos Forcing
              setenv GWDRSDIR   ${BOUNDARY_DIR}/GWD_RIDGE                              # Location of GWD_RIDGE files

else if( $SITE == 'NCCS' ) then
              setenv BATCH_CMD "sbatch"                                                # SLURM Batch command
              setenv BATCH_GROUP "SBATCH --account="                                   # SLURM Syntax for account name
              setenv BATCH_TIME "SBATCH --time="                                       # SLURM Syntax for walltime
              setenv BATCH_JOBNAME "SBATCH --job-name="                                # SLURM Syntax for job name
              setenv BATCH_OUTPUTNAME "SBATCH --output="                               # SLURM Syntax for job output name
              setenv BATCH_JOINOUTERR "DELETE"                                         # SLURM joins out and err by default
              setenv     RUN_FT "06:00:00"                                             # Wallclock Time   for gcm_forecast.j
              setenv     RUN_T  "12:00:00"                                             # Wallclock Time   for gcm_run.j
              setenv    POST_T  "8:00:00"                                              # Wallclock Time   for gcm_post.j
              setenv    PLOT_T  "12:00:00"                                             # Wallclock Time   for gcm_plot.j
              setenv ARCHIVE_T  "2:00:00"                                              # Wallclock Time   for gcm_archive.j

              @ NPCUS = `echo "($POST_NPES + $NCPUS_PER_NODE - 1)/$NCPUS_PER_NODE" | bc`

              setenv    RUN_Q   "SBATCH --constraint=${MODEL}"                                # batch queue name for gcm_run.j
              setenv    RUN_P   "SBATCH --nodes=${NODES} --ntasks-per-node=${NCPUS_PER_NODE}" # PE Configuration for gcm_run.j
              setenv    RUN_FP  "SBATCH --nodes=${NODES} --ntasks-per-node=${NCPUS_PER_NODE}" # PE Configuration for gcm_forecast.j
              setenv    POST_Q  "SBATCH --constraint=${MODEL}"                                # batch queue name for gcm_post.j
              setenv    PLOT_Q  "SBATCH --constraint=${MODEL}"                                # batch queue name for gcm_plot.j
              setenv    MOVE_Q  "SBATCH --partition=datamove"                                 # batch queue name for gcm_moveplot.j
              setenv ARCHIVE_Q  "SBATCH --partition=datamove"                                 # batch queue name for gcm_archive.j
              setenv    POST_P  "SBATCH --nodes=${NPCUS} --ntasks-per-node=${NCPUS_PER_NODE}" # PE Configuration for gcm_post.j
              setenv    PLOT_P  "SBATCH --nodes=4 --ntasks=4"                                 # PE Configuration for gcm_plot.j
              setenv ARCHIVE_P  "SBATCH --ntasks=1"                                           # PE Configuration for gcm_archive.j
              setenv    MOVE_P  "SBATCH --ntasks=1"                                           # PE Configuration for gcm_moveplot.j

              setenv BOUNDARY_DIR /discover/nobackup/projects/gmao
              setenv BC_BASE ${BOUNDARY_DIR}/bcs_shared/fvInput/ExtData/esm/tiles
              setenv BCSDIR  ${BC_BASE}/${LSM_BCS}                                            # location of Boundary Conditions
              setenv REPLAY_ANA_EXPID x0039                                                   # Default Analysis Experiment for REPLAY
              setenv REPLAY_ANA_LOCATION ${BOUNDARY_DIR}/g6dev/ltakacs/x0039                  # Default Analysis Location   for REPLAY
              setenv M2_REPLAY_ANA_LOCATION ${BOUNDARY_DIR}/merra2/data                       # Default Analysis Location   for M2 REPLAY

              if( ${OGCM_IM}x${OGCM_JM} == "1440x720" ) then
                   setenv SSTDIR     $SHARE/gmao_ops/fvInput/g5gcm/bcs/SST/${OGCM_IM}x${OGCM_JM} # location of SST Boundary Conditions
              else
                   setenv SSTDIR     $SHARE/gmao_ops/fvInput/g5gcm/bcs/realtime/@SSTNAME/${OGCM_IM}x${OGCM_JM} # location of SST Boundary Conditions
              endif
              setenv CHMDIR     $SHARE/gmao_ops/fvInput_nc3                            # locations of Aerosol Chemistry BCs
              setenv WRKDIR     /discover/nobackup/$LOGNAME                            # user work directory
              setenv COUPLEDIR  ${BOUNDARY_DIR}/bcs_shared/make_bcs_inputs/ocean       # Coupled Ocean/Atmos Forcing
              setenv GWDRSDIR   ${BOUNDARY_DIR}/osse2/stage/BCS_FILES/GWD_RIDGE        # Location of GWD_RIDGE files
              if (${OGRIDTYP} == "MITLLC") then
                setenv SSTDIR /discover/nobackup/estrobac/geos5/SSTDIR
              endif

else if( $SITE == 'AWS' | $SITE == 'Azure' ) then
              setenv BATCH_CMD "sbatch"                                                    # SLURM Batch command
              setenv BATCH_GROUP DELETE                                                    # SLURM Syntax for account name
              setenv BATCH_TIME "SBATCH --time="                                           # SLURM Syntax for walltime
              setenv BATCH_JOBNAME "SBATCH --job-name="                                    # SLURM Syntax for job name
              setenv BATCH_OUTPUTNAME "SBATCH --output="                                   # SLURM Syntax for job output name
              setenv BATCH_JOINOUTERR "DELETE"                                             # SLURM joins out and err by default
              setenv RUN_FT "06:00:00"                                                     # Wallclock Time   for gcm_forecast.j
              setenv RUN_T  "12:00:00"                                                     # Wallclock Time   for gcm_run.j
              setenv POST_T  "8:00:00"                                                     # Wallclock Time   for gcm_post.j
              setenv PLOT_T  "12:00:00"                                                    # Wallclock Time   for gcm_plot.j
              setenv ARCHIVE_T  "1:00:00"                                                  # Wallclock Time   for gcm_archive.j
              setenv RUN_Q     "SBATCH --constraint=${MODEL}"                              # batch queue name for gcm_run.j
              setenv RUN_P   "SBATCH --nodes=${NODES} --ntasks-per-node=${NCPUS_PER_NODE}" # PE Configuration for gcm_run.j
              setenv RUN_FP  "SBATCH --nodes=${NODES} --ntasks-per-node=${NCPUS_PER_NODE}" # PE Configuration for gcm_forecast.j
              setenv POST_Q  NULL                                                          # batch queue name for gcm_post.j
              setenv PLOT_Q  NULL                                                          # batch queue name for gcm_plot.j
              setenv MOVE_Q  NULL                                                          # batch queue name for gcm_moveplot.j
              setenv ARCHIVE_Q  NULL                                                       # batch queue name for gcm_archive.j
              setenv POST_P  "SBATCH --ntasks=${POST_NPES}"                                # PE Configuration for gcm_post.j
              setenv PLOT_P  "SBATCH --nodes=4 --ntasks=4"                                 # PE Configuration for gcm_plot.j
              setenv ARCHIVE_P  "SBATCH --ntasks=1"                                        # PE Configuration for gcm_archive.j
              setenv MOVE_P  "SBATCH --ntasks=1"                                           # PE Configuration for gcm_moveplot.j

              setenv BOUNDARY_DIR /ford1/share/gmao_SIteam/ModelData
              setenv BC_BASE ${BOUNDARY_DIR}/bcs_shared/fvInput/ExtData/esm/tiles
              setenv BCSDIR  ${BC_BASE}/${LSM_BCS}                                      # location of Boundary Conditions
              setenv REPLAY_ANA_EXPID    REPLAY_UNSUPPORTED                             # Default Analysis Experiment for REPLAY
              setenv REPLAY_ANA_LOCATION REPLAY_UNSUPPORTED                             # Default Analysis Location   for REPLAY
              setenv M2_REPLAY_ANA_LOCATION REPLAY_UNSUPPORTED                          # Default Analysis Location   for M2 REPLAY

              setenv SSTDIR     ${BOUNDARY_DIR}/@SSTNAME/${OGCM_IM}x${OGCM_JM}          # location of SST Boundary Conditions
              setenv CHMDIR     ${BOUNDARY_DIR}/fvInput_nc3                             # locations of Aerosol Chemistry BCs
              setenv WRKDIR     $HOME                                                   # user work directory
              setenv COUPLEDIR  ${BOUNDARY_DIR}/bcs_shared/make_bcs_inputs/ocean        # Coupled Ocean/Atmos Forcing
              setenv GWDRSDIR   ${BOUNDARY_DIR}/GWD_RIDGE                               # Location of GWD_RIDGE files

else
# These are defaults for the desktop
              setenv BATCH_CMD "sbatch"                                                # SLURM Batch command
              setenv BATCH_GROUP "SBATCH --account="                                   # SLURM Syntax for account name
              setenv BATCH_TIME "SBATCH --time="                                       # SLURM Syntax for walltime
              setenv BATCH_JOBNAME "SBATCH --job-name="                                # SLURM Syntax for job name
              setenv BATCH_OUTPUTNAME "SBATCH --output="                               # SLURM Syntax for job output name
              setenv BATCH_JOINOUTERR "DELETE"                                         # SLURM joins out and err by default
              setenv     RUN_FT "06:00:00"                                             # Wallclock Time   for gcm_forecast.j
              setenv     RUN_T  "12:00:00"                                             # Wallclock Time   for gcm_run.j
              setenv    POST_T  "8:00:00"                                              # Wallclock Time   for gcm_post.j
              setenv    PLOT_T  "12:00:00"                                             # Wallclock Time   for gcm_plot.j
              setenv ARCHIVE_T  "1:00:00"                                              # Wallclock Time   for gcm_archive.j
              setenv  RUN_Q     NULL                                                   # batch queue name for gcm_run.j
              setenv  RUN_P     NULL                                                   # PE Configuration for gcm_run.j
              setenv  RUN_FP    NULL                                                   # PE Configuration for gcm_forecast.j
              setenv    POST_Q  NULL                                                   # batch queue name for gcm_post.j
              setenv    PLOT_Q  NULL                                                   # batch queue name for gcm_plot.j
              setenv    MOVE_Q  NULL                                                   # batch queue name for gcm_moveplot.j
              setenv ARCHIVE_Q  NULL                                                   # batch queue name for gcm_archive.j
              setenv    POST_P  NULL                                                   # PE Configuration for gcm_run.j
              setenv    PLOT_P  NULL                                                   # PE Configuration for gcm_post.j
              setenv ARCHIVE_P  NULL                                                   # PE Configuration for gcm_archive.j
              setenv    MOVE_P  NULL                                                   # PE Configuration for gcm_moveplot.j

              setenv BOUNDARY_DIR /ford1/share/gmao_SIteam/ModelData
              setenv BC_BASE ${BOUNDARY_DIR}/bcs_shared/fvInput/ExtData/esm/tiles
              setenv BCSDIR  ${BC_BASE}/${LSM_BCS}                                     # location of Boundary Conditions
              setenv REPLAY_ANA_EXPID    REPLAY_UNSUPPORTED                            # Default Analysis Experiment for REPLAY
              setenv REPLAY_ANA_LOCATION REPLAY_UNSUPPORTED                            # Default Analysis Location   for REPLAY
              setenv M2_REPLAY_ANA_LOCATION REPLAY_UNSUPPORTED                         # Default Analysis Location   for M2 REPLAY

              setenv SSTDIR     ${BOUNDARY_DIR}/@SSTNAME/${OGCM_IM}x${OGCM_JM}         # location of SST Boundary Conditions
              setenv CHMDIR     ${BOUNDARY_DIR}/fvInput_nc3                            # locations of Aerosol Chemistry BCs
              setenv WRKDIR     $HOME                                                  # user work directory
              setenv COUPLEDIR  ${BOUNDARY_DIR}/bcs_shared/make_bcs_inputs/ocean       # Coupled Ocean/Atmos Forcing
              setenv GWDRSDIR   ${BOUNDARY_DIR}/GWD_RIDGE                              # Location of GWD_RIDGE files
              set NX = 1
              set NY = 6
              # By default on desktop, just ignore IOSERVER for now
              set USE_IOSERVER = 0
              set NUM_OSERVER_NODES = 0
              set NUM_BACKEND_PES = 0
endif

#######################################################################
#                 Create Paths for HOME and EXP Directories
#         Note: Default Path will be kept in $HOME/.HOMDIRroot
#######################################################################

# HOME Directory (for scripts and RC files)
# -----------------------------------------
    set check =  FALSE
while( $check == FALSE )
  if( -e $HOME/.HOMDIRroot ) then
         set HOMDIRroot = `cat $HOME/.HOMDIRroot`
  else
         set HOMDIRroot = $WRKDIR
  endif

  setenv HOMDIR_def $HOMDIRroot/$EXPID
  echo " "
  echo "Enter Desired Location for the ${C1}HOME${CN} Directory (to contain scripts and RC files)"
  echo "Hit ENTER to use Default Location:"
  echo "----------------------------------"
  echo "Default:  ${C2}${HOMDIR_def}${CN}"
  set   NUHOMDIR  = $<
  if( .$NUHOMDIR != . ) then
       setenv HOMDIR     $NUHOMDIR
       setenv HOMDIR_def $NUHOMDIR
  else
       setenv HOMDIR  $HOMDIR_def
  endif

  if( "$EXPID" != `basename $HOMDIR` ) then
       echo "\!\! The ${C1}HOME${CN} Directory MUST point to the ${C1}EXPID${CN}: ${C2}${EXPID}${CN}"
       echo " "
  else
      set check = TRUE
  endif
end
mkdir -p $HOMDIR


# EXP Directory (for Output Data and Restarts)
# --------------------------------------------
    set check =  FALSE
while( $check == FALSE )
  if( -e $HOME/.EXPDIRroot ) then
         set EXPDIRroot = `cat $HOME/.EXPDIRroot`
  else
         set EXPDIRroot = $WRKDIR
  endif
  setenv EXPDIR_def $EXPDIRroot/$EXPID
  echo ""
  echo "Enter Desired Location for the ${C1}EXPERIMENT${CN} Directory (to contain model output and restart files)"
  echo "Hit ENTER to use Default Location:"
  echo "----------------------------------"
  echo "Default:  ${C2}${EXPDIR_def}${CN}"
  set   NUEXPDIR  = $<
  if( .$NUEXPDIR != . ) then
       setenv EXPDIR     $NUEXPDIR
       setenv EXPDIR_def $NUEXPDIR
  else
       setenv EXPDIR  $EXPDIR_def
  endif

  if( "$EXPID" != `basename $EXPDIR` ) then
       echo "\!\! The ${C1}EXPERIMENT${CN} Directory MUST point to the ${C1}EXPID${CN}: ${C2}${EXPID}${CN}"
       echo " "
  else
      set check = TRUE
  endif
end
mkdir -p $EXPDIR



# Build HOME Root Directory
# -------------------------
@ n = 1
set root = `echo $HOMDIR | cut -d / -f$n`
while( .$root == . )
@ n = $n + 1
set root = `echo $HOMDIR | cut -d / -f$n`
end

set HOMDIRroot = ''
while( $root != $EXPID )
set HOMDIRroot = `echo ${HOMDIRroot}/${root}`
@ n = $n + 1
set root = `echo $HOMDIR | cut -d / -f$n`
end
if( -e $HOME/.HOMDIRroot ) /bin/rm $HOME/.HOMDIRroot
echo $HOMDIRroot > $HOME/.HOMDIRroot


# Build EXP Root Directory
# ------------------------
@ n = 1
set root = `echo $EXPDIR | cut -d / -f$n`
while( .$root == . )
@ n = $n + 1
set root = `echo $EXPDIR | cut -d / -f$n`
end

set EXPDIRroot = ''
while( $root != $EXPID )
set EXPDIRroot = `echo ${EXPDIRroot}/${root}`
@ n = $n + 1
set root = `echo $EXPDIR | cut -d / -f$n`
end
if( -e $HOME/.EXPDIRroot ) /bin/rm $HOME/.EXPDIRroot
echo $EXPDIRroot > $HOME/.EXPDIRroot

#######################################################################
#                       Locate Build Directory
#######################################################################

# GEOSagcm Build Directory
# ------------------------

  echo "Enter Location for ${C1}Build${CN} directory containing:  bin/ etc/ include/ etc..."
  echo "Hit ENTER to use Default Location:"
  echo "----------------------------------"
  echo "Default:  ${C2}${GEOSDEF}${CN}"

  set     GEOSDIR  = $GEOSDEF
  set   NUGEOSDIR  = $<
  if( .$NUGEOSDIR != . ) then
       set GEOSDIR = $NUGEOSDIR
  endif

  set check =  FALSE

GEOSDIR:
while( $check == FALSE )

  if(! (-e $GEOSDIR/bin ) ) then
       echo " "
       echo "\!\! ${C1}WARNING${CN} \!\!"
       echo "\!\! This Sandbox has not been built"
       echo "\!\! Please enter a valid location for the ${C1}GEOSagcm Build${CN}"
       echo "\!\! or ... "
       echo "\!\! Enter ${C1}C${CN} to continue without a Build"
       echo " "

       set        NUGEOSDIR  = $<
       if(      .$NUGEOSDIR == . ) then
              set   GEOSDIR  = $GEOSDEF

       else if( .$NUGEOSDIR == .C | .$NUGEOSDIR == .c ) then
                set GEOSDIR  = $GEOSDEF
                set check    = TRUE
       else
                set GEOSDIR = $NUGEOSDIR
       endif

       goto GEOSDIR
  else
       set check = TRUE
  endif
end

#
# GEOSBIN does point to the bin/ directory in each
#
setenv GEOSSRC  ${GEOSDIR}
setenv GEOSBIN  ${GEOSDIR}/bin
setenv GEOSETC  ${GEOSDIR}/etc

setenv GEOSUTIL ${GEOSSRC}
setenv GCMVER   `cat ${GEOSETC}/.AGCM_VERSION`

#######################################################################
#                    Check for Group ID Sponsor Code
#         Note: Default GROUP will be kept in $HOME/.GROUProot
#######################################################################

       set GROUPS    = `groups`
if( -e $HOME/.GROUProot ) then
       set GROUProot = `cat $HOME/.GROUProot`
else
       set GROUProot = $GROUPS[1]
endif

echo " "
echo "Current GROUPS: ${GROUPS}"
echo "Enter your ${C1}GROUP ID${CN} for Current EXP: (Default: ${C2}${GROUProot}${CN})"
echo "-----------------------------------"
set   NUGROUP  = $<
if( .$NUGROUP != . ) then
     setenv GROUP $NUGROUP
else
     setenv GROUP $GROUProot
endif

if( -e $HOME/.GROUProot ) /bin/rm $HOME/.GROUProot
echo $GROUP > $HOME/.GROUProot

#######################################################################
#      Copy Model Executable and RC Files to Experiment Directory
#######################################################################

mkdir -p  $EXPDIR/RC

# Copy over all files and subdirs in install/etc, keeping symlinks
cp -RP $GEOSDIR/etc/* $EXPDIR/RC

# Remove templated files in RC as they are unneeded and confusing for experiments
rm -f $EXPDIR/RC/*.tmpl
rm -f $EXPDIR/RC/fvcore_layout.rc

# Copy or link GEOSgcm.x if USING_SINGULARITY is FALSE
if ( $USING_SINGULARITY == FALSE ) then
   if ( $LINKX == "TRUE" ) then
      if ( -e $GEOSBIN/GEOSgcm.x ) ln -s $GEOSBIN/GEOSgcm.x $EXPDIR
   else
      if ( -e $GEOSBIN/GEOSgcm.x ) cp $GEOSBIN/GEOSgcm.x $EXPDIR
   endif

   # Set a couple variables for sed'ing out bits of the run script
   set SINGULARITY_BUILD = "#DELETE"
   set NATIVE_BUILD = ""
else
   # Set a couple variables for sed'ing out bits of the run script
   set SINGULARITY_BUILD = ""
   set NATIVE_BUILD = "#DELETE"
endif

#######################################################################
#               Set Recommended MPI Stack Settings
#######################################################################

# By default do not write restarts by oserver
set RESTART_BY_OSERVER = NO

/bin/rm -f $HOMDIR/SETENV.commands

# NAS has a "several_tries" script but we need an empty
# default
set SEVERAL_TRIES = ''

if( $MPI_STACK == openmpi ) then

# Open MPI and GEOS has issues with restart writing. Having the
# oserver write them can be orders of magnitude faster

set RESTART_BY_OSERVER = YES

# Testing by Bill Putman determined some useful
# Open MPI parameters. Testing shows these work
# on both OSs at NCCS and on macOS

cat > $HOMDIR/SETENV.commands << EOF
# Turn off warning about TMPDIR on NFS
setenv OMPI_MCA_shmem_mmap_enable_nfs_warning 0
# pre-connect MPI procs on mpi_init
setenv OMPI_MCA_mpi_preconnect_all 1
setenv OMPI_MCA_coll_tuned_bcast_algorithm 7
setenv OMPI_MCA_coll_tuned_scatter_algorithm 2
setenv OMPI_MCA_coll_tuned_reduce_scatter_algorithm 3
setenv OMPI_MCA_coll_tuned_allreduce_algorithm 3
setenv OMPI_MCA_coll_tuned_allgather_algorithm 4
setenv OMPI_MCA_coll_tuned_allgatherv_algorithm 3
setenv OMPI_MCA_coll_tuned_gather_algorithm 1
setenv OMPI_MCA_coll_tuned_barrier_algorithm 0
# required for a tuned flag to be effective
setenv OMPI_MCA_coll_tuned_use_dynamic_rules 1
# disable file locks
setenv OMPI_MCA_sharedfp "^lockedfile,individual"
EOF

# The below settings seem to be recommended for hybrid
# systems using MVAPICH but could change

else if( $MPI_STACK == mvapich ) then

# MVAPICH and GEOS has issues with restart writing. Having the
# oserver write them seems to...work
set RESTART_BY_OSERVER = YES

cat > $HOMDIR/SETENV.commands << EOF
setenv MV2_ENABLE_AFFINITY 0
setenv SLURM_DISTRIBUTION block
setenv MV2_MPIRUN_TIMEOUT 100
setenv MV2_GATHERV_SSEND_THRESHOLD 256
EOF

else if( $MPI_STACK == mpt ) then

# MPT has an issue with writing restarts on a single node
# due to issues with many MPI_GatherV calls. We can "avoid"
# this by having the oserver write the restarts. But
# we only need to do this for single-node runs. For simplicity,
# we assume LOW_ATM_RES = TRUE means single-node

if ( $LOW_ATM_RES == TRUE ) then
   set RESTART_BY_OSERVER = YES
endif

# NAS recommends several_tries for MPT job issues
# https://www.nas.nasa.gov/hecc/support/kb/mpt-startup-failures-workarounds_526.html
set SEVERAL_TRIES = '/u/scicon/tools/bin/several_tries'

cat > $HOMDIR/SETENV.commands << EOF

setenv MPI_COLL_REPRODUCIBLE
setenv SLURM_DISTRIBUTION block

#setenv MPI_DISPLAY_SETTINGS 1
#setenv MPI_VERBOSE 1

setenv MPI_MEMMAP_OFF
unsetenv MPI_NUM_MEMORY_REGIONS
setenv MPI_XPMEM_ENABLED yes
unsetenv SUPPRESS_XPMEM_TRIM_THRESH

setenv MPI_LAUNCH_TIMEOUT 40

setenv MPI_COMM_MAX  1024
setenv MPI_GROUP_MAX 1024
setenv MPI_BUFS_PER_PROC 256

# For some reason, PMI_RANK is randomly set and interferes
# with binarytile.x and other executables.
unsetenv PMI_RANK

# Often when debugging on MPT, the traceback from Intel Fortran
# is "absorbed" and only MPT's errors are displayed. To allow the
# compiler's traceback to be displayed, uncomment this environment
# variable
#setenv FOR_IGNORE_EXCEPTIONS false

EOF

# Testing at NAS shows that coupled runs *require* MPI_SHEPHERD=true
# to run. We believe this is due to LD_PRELOAD. For now we only set
# this for coupled runs.
if( $OGCM == TRUE ) then
   set MPT_SHEPHERD = "setenv MPI_SHEPHERD true"
endif

else if( $MPI_STACK == intelmpi ) then

cat > $HOMDIR/SETENV.commands << EOF
# This flag prints out the Intel MPI state. Uncomment if needed
#setenv I_MPI_DEBUG 9
EOF

# These are options determined to be useful at NCCS and NAS
# Not setting generally as they are more fabric/cluster
# specific compared to the above adjustments. We protect
# like this because these settings do *not* work on systems like
# CI runners
if ( $SITE == 'NCCS' | $SITE == 'NAS' ) then

cat >> $HOMDIR/SETENV.commands << EOF
setenv I_MPI_ADJUST_ALLREDUCE 12
setenv I_MPI_ADJUST_GATHERV 3

setenv I_MPI_FABRICS shm:ofi
setenv I_MPI_OFI_PROVIDER psm3

# This has been found to help with congestion
setenv FI_PSM3_CONN_TIMEOUT 120

# NOTE: If you are seeing oddities with Intel MPI
# and a -perhost/-ppn use, you might need to
# uncomment the below line
#
#setenv I_MPI_JOB_RESPECT_PROCESS_PLACEMENT disable
#
# This is usually needed when running interactively
# as SLURM/PBS in batch mode is usually fine with process placement
EOF

endif # if NCCS or NAS

else if ( $MPI_STACK == mpich ) then

if ( $SITE == 'NAS' ) then

cat > $HOMDIR/SETENV.commands << EOF
# Testing on Athena/Turin at NAS shows these
# settings are needed for oserver use
# NOTE: These should probably only be used by
# *Cray* MPICH at NAS, but for now, that's
# the only MPICH being used there.

setenv FI_CXI_OPTIMIZED_MRS 0
setenv FI_CXI_RX_MATCH_MODE hybrid
EOF

endif # if NAS

endif # if mpi


#######################################################################
#               Create Local Scripts and Resource Files
#######################################################################

cat >      $HOMDIR/sedfile << EOF
/@SETENVS/ {
t success
: success
r $HOMDIR/SETENV.commands
d
}

s?@GCMVER?$GCMVER?g
s?@EXPSRC?$GEOSTAG?g
s?@EXPID?$EXPID?g
s?@RUN_N?$RUN_N?g
s?@RUN_FN?$RUN_FN?g
s?@RUN_FT?$RUN_FT?g
s?@RUN_T?$RUN_T?g
s?@RUN_P?$RUN_P?g
s?@RUN_FP?$RUN_FP?g
s?@RUN_Q?$RUN_Q?g
s?@POST_N?$POST_N?g
s?@POST_T?$POST_T?g
s?@POST_P?$POST_P?g
s?@POST_Q?$POST_Q?g
s?@MOVE_N?$MOVE_N?g
s?@PLOT_N?$PLOT_N?g
s?@PLOT_T?$PLOT_T?g
s?@PLOT_P?$PLOT_P?g
s?@PLOT_Q?$PLOT_Q?g
s?@MOVE_Q?$MOVE_Q?g
s?@MOVE_P?$MOVE_P?g
s?@ARCHIVE_N?$ARCHIVE_N?g
s?@ARCHIVE_T?$ARCHIVE_T?g
s?@ARCHIVE_P?$ARCHIVE_P?g
s?@ARCHIVE_Q?$ARCHIVE_Q?g
s?@REGRESS_N?$REGRESS_N?g
s?@BCSDIR?$BCSDIR?g
s?@SSTDIR?$SSTDIR?g
s?@SSTNAME?$SSTNAME?g
s?@OCEANOUT?$OCEANOUT?g
s?@LSMBCS?$LSM_BCS?g
s?@EMIP_BCS_IN?$EMIP_BCS_IN?g
s?@EMIP_MERRA2?$EMIP_MERRA2?g
s?@BCSTAG?$OCEAN_TAG?g
s?@SSTFILE?$SSTFILE?g
s?@ICEFILE?$ICEFILE?g
s?@KPARFILE?$KPARFILE?g
s?@CHMDIR?$CHMDIR?g
s?@COUPLEDIR?$COUPLEDIR?g
s?@GWDRSDIR?$GWDRSDIR?g
s?@EXPDIR?$EXPDIR?g
s?@EXPDSC?$EXPDSC?g
s?@HOMDIR?$HOMDIR?g
s?@BATCH_GROUP?${BATCH_GROUP}${GROUP}?g
s?@BATCH_TIME?$BATCH_TIME?g
s?@BATCH_CMD?$BATCH_CMD?g
s?@BATCH_JOBNAME?$BATCH_JOBNAME?g
s?@BATCH_OUTPUTNAME?$BATCH_OUTPUTNAME?g
s?@BATCH_JOINOUTERR?$BATCH_JOINOUTERR?g
s?@SITE?$SITE?g
s?@GEOSDIR?$GEOSDIR?g
s?@GEOSSRC?$GEOSSRC?g
s?@GEOSBIN?$GEOSBIN?g
s?@GEOSETC?$GEOSETC?g
s?@GEOSUTIL?$GEOSUTIL?g
s?@SINGULARITY_BUILD?$SINGULARITY_BUILD?g
s?@NATIVE_BUILD?$NATIVE_BUILD?g
s?@MPT_SHEPHERD?$MPT_SHEPHERD?g
s?@SINGULARITY_SANDBOX?$SINGULARITY_SANDBOX?g
s?@REAL_BIND_PATH?$REAL_BIND_PATH?g
s?@BASE_BIND_PATH?$BASE_BIND_PATH?g
s?@BC_BASE?$BC_BASE?g
s?@BOUNDARY_DIR?$BOUNDARY_DIR?g

s?@CHECKPOINT_TYPE?default?g

s?@OGCM_NX?$OGCM_NX?g
s?@OGCM_NY?$OGCM_NY?g
s?@OGCM_NPROCS?$OGCM_NPROCS?g

s?@OBSERVER_FRQ?0?g
s?^[ \t]*RECORD_?#RECORD_?g

s?@DASTUNING?#?g

s?@FORCEDAS?$FORCEDAS?g
s?@FORCEGCM?$FORCEGCM?g
s?@COUPLED?$COUPLED?g
s?@CLDMICRO?$CLDMICRO?g
s?@MOM5?$MOM5?g
s?@MOM6?$MOM6?g
s?@OCNMODEL?$OCNMODEL?g
s?@CICE4?$CICE4?g
s?@CICE6?$CICE6?g
s?@HIST_CICE4?$HIST_CICE4?g
s?@MIT?$MIT?g
s?@DATAOCEAN?$DATAOCEAN?g
s?@OPS_SPECIES?$OPS_SPECIES?g
s?@CMIP_SPECIES?$CMIP_SPECIES?g
s?@MERRA2OX_SPECIES?$MERRA2OX_SPECIES?g
s?@FVCUBED?$FVCUBED?g
s?@HIST_GOCART?$HIST_GOCART?g
s?@HIST_CATCHCN?$HIST_CATCHCN?g
s?@GCMRUN_CATCHCN?$GCMRUN_CATCHCN?g
s?@EMIP_OLDLAND?$EMIP_OLDLAND?g
s?@EMIP_NEWLAND?$EMIP_NEWLAND?g
s?@LSM_PARMS?$LSM_PARMS?g
s?@OCEAN_NAME?$OCEAN_NAME?g
s?@OCEAN_PRELOAD?$OCEAN_PRELOAD?g

s?@4DIAUDAS?#DELETE?g
s?@REGULAR_REPLAY_GMAO?#?g
s?@REGULAR_REPLAY_NCEP?#DELETE?g
s?@REGULAR_REPLAY_ECMWF?#DELETE?g
s?@REGULAR_REPLAY?#?g
s?ana4replay.eta.%y4%m2%d2_%h2z.nc4?/discover/nobackup/projects/gmao/merra2/data/ana/MERRA2_all/Y%y4/M%m2/MERRA2.ana.eta.%y4%m2%d2_%h2z.nc4?g

s?@REPLAY_ANA_EXPID?$REPLAY_ANA_EXPID?g
s?@REPLAY_ANA_LOCATION?$REPLAY_ANA_LOCATION?g
s?@M2_REPLAY_ANA_LOCATION?$M2_REPLAY_ANA_LOCATION?g

s?@OX_RELAXTIME?$OX_RELAXTIME?g
s?@PCHEM_CLIM_YEARS?$PCHEM_CLIM_YEARS?g

s?@RATS_PROVIDER?$RATS_PROVIDER?g
s?@AERO_PROVIDER?$AERO_PROVIDER?g
s?@OANA_PROVIDER?PCHEM?g
s?@EMISSIONS?$EMISSIONS?g

s?@CH4_PROVIDER?$CH4_PROVIDER?g
s?@CO2_PROVIDER?$CO2_PROVIDER?g

s^@DYCORE^$DYCORE^g
s^@AGCM_GRIDNAME^$AGCM_GRIDNAME^g
s^@OGCM_GRIDNAME^$OGCM_GRIDNAME^g

s?@OGCM_IS_FCST?$OGCM_IS_FCST?g
s^@BOOT^YES^g
s^@BCSRES^$BCSRES^g
s^@OCEANtag^$OCEAN_RES^g
s^@ATMOStag^$ATMOS_RES^g
s^@RES_DATELINE^$RES_DATELINE^g
s^@TILEDATA^$TILEDATA^g
s^@TILEBIN^$TILEBIN^g
s/@DT/$DT/g
s/@SOLAR_DT/$SOLAR_DT/g
s/@IRRAD_DT/$IRRAD_DT/g
s/@OCEAN_DT/$OCEAN_DT/g
s/@LONG_DT/$LONG_DT/g
s/@NX/$NX/g
s/@NY/$NY/g
s/@USE_SHMEM/$USE_SHMEM/g
s/@USE_IOSERVER/$USE_IOSERVER/g
s/@NUM_OSERVER_NODES/$NUM_OSERVER_NODES/g
s/@NUM_BACKEND_PES/$NUM_BACKEND_PES/g
s/@RESTART_BY_OSERVER/$RESTART_BY_OSERVER/g
s#@SEVERAL_TRIES#$SEVERAL_TRIES#g
s/@NCPUS_PER_NODE/$NCPUS_PER_NODE/g
s/@NUM_READERS/$NUM_READERS/g
s/@NUM_WRITERS/$NUM_WRITERS/g
s/@LATLON_AGCM/$LATLON_AGCM/g
s?@LATLON_OGCM?$LATLON_OGCM?g
s/@CUBE_AGCM/$CUBE_AGCM/g
s?@CUBE_OGCM?$CUBE_OGCM?g
s/@GRID_TYPE/$GRID_TYPE/g
s/@AGCM_NF/$AGCM_NF/g
s/@AGCM_IM/$AGCM_IM/g
s/@AGCM_JM/$AGCM_JM/g
s/@AGCM_LM/$AGCM_LM/g
s/@OGCM_IM/$OGCM_IM/g
s/@OGCM_JM/$OGCM_JM/g
s/@OGCM_LM/$OGCM_LM/g
s/@OGCM_NF/$OGCM_NF/g
s/@OGCM_GRID_TYPE/$OGCM_GRID_TYPE/g
s/@BEG_DATE/${BEG_DATE}/g
s/@END_DATE/${END_DATE}/g
s/@JOB_SGMT/${JOB_SGMT}/g
s/@NUM_SGMT/${NUM_SGMT}/g

s/@CONUS/${CONUS}/g
s/@FV_HWT/${FV_HWT}/g
s/@CONVPAR_OPTION/${CONVPAR_OPTION}/g
s/@STRETCH_FACTOR/${STRETCH_FACTOR}/g

s/@INTERPOLATE_SST/$INTERPOLATE_SST/g
s/@HIST_IM/$HIST_IM/g
s/@HIST_JM/$HIST_JM/g

s/@ISCCP_SATSIM/1/g
s/@MODIS_SATSIM/0/g
s/@RADAR_SATSIM/0/g
s/@LIDAR_SATSIM/0/g
s/@MISR_SATSIM/0/g
s/@SATSIM/0/g

s/@USE_SKIN_LAYER/1/g
s/@ANALYZE_TS/0/g

s/@LSM_CHOICE/$LSM_CHOICE/g

s/@MP_TURN_OFF_WSUB_EXTDATA/$MP_TURN_OFF_WSUB_EXTDATA/g

s?@BACM_1M_?$BACM_1M_?g
s?@GFDL_1M_?$GFDL_1M_?g
s?@MGB2_2M_?$MGB2_2M_?g

s?@PRELOAD_COMMAND?$PRELOAD_COMMAND?g
s?@LD_LIBRARY_PATH_CMD?$LD_LIBRARY_PATH_CMD?g
s?@RUN_CMD?$RUN_CMD?g

s?@MODELATM?$MODELATM?g
s?@USE_DATA_ATM4OCN?$USE_DATA_ATM4OCN?g

EOF

# Added FV3/GFDL-MP Specific Parameters
# -------------------------------------

cat >> $HOMDIR/sedfile << EOF

s^@HYDROSTATIC^$HYDROSTATIC^g
s?@FV_SCHMIDT?$SCHMIDT?g
s?@FV_STRETCH_FAC?$STRETCH_FAC?g
s?@FV_TARGET_LON?$TARGET_LON?g
s?@FV_TARGET_LAT?$TARGET_LAT?g
s?@FV_MAKENH?$FV_MAKENH?g
s?@FV_HYDRO?$FV_HYDRO?g
s?@GFDL_PROG_CCN?$GFDL_PROG_CCN?g
s?@GFDL_USE_CCN?$GFDL_USE_CCN?g
s?@GFDL_HYDRO?$GFDL_HYDRO?g

EOF

set FILES = "gcm_run.j          \
             gcm_post.j         \
             gcm_archive.j      \
             gcm_regress.j      \
             gcm_plot.tmpl      \
             gcm_quickplot.csh  \
             gcm_moveplot.j     \
             gcm_forecast.tmpl  \
             gcm_forecast.setup \
             gcm_emip.setup     \
             CAP.rc.tmpl        \
             AGCM.rc.tmpl       \
             HISTORY.rc.tmpl    \
             logging.yaml       \
             linkbcs.tmpl       "
set FILES = `echo $FILES`

# We need to make a temporary directory for these files as
# other users might not be able to copy into the install/bin
# directory where this is running

set TMPOCEANDIR = `mktemp -d`

if( $OGCM == TRUE & "$OCNMODEL" != "MIT" ) then
   if ( $OCEAN_NAME == "MOM" ) then
      /bin/cp ${ETCDIR}/MOM5/geos5/${OGCM_IM}x${OGCM_JM}/INPUT/input.nml ${TMPOCEANDIR}
      /bin/cp ${ETCDIR}/MOM5/geos5/${OGCM_IM}x${OGCM_JM}/INPUT/*table ${TMPOCEANDIR}
      set FILES = "$FILES field_table "
   else if ( $OCEAN_NAME == "MOM6" ) then
      /bin/cp ${ETCDIR}/MOM6/mom6_app/${OGCM_IM}x${OGCM_JM}/MOM_input ${TMPOCEANDIR}
      /bin/cp ${ETCDIR}/MOM6/mom6_app/${OGCM_IM}x${OGCM_JM}/MOM_override ${TMPOCEANDIR}
      /bin/cp ${ETCDIR}/MOM6/mom6_app/${OGCM_IM}x${OGCM_JM}/input.nml ${TMPOCEANDIR}
      /bin/cp ${ETCDIR}/MOM6/mom6_app/${OGCM_IM}x${OGCM_JM}/*table ${TMPOCEANDIR}
      set FILES = "$FILES MOM_input MOM_override data_table "
   endif

   if ( $SEAICE_NAME == "CICE6" ) then
      /bin/cp ${ETCDIR}/CICE6/cice6_app/${OGCM_IM}x${OGCM_JM}/ice_in ${TMPOCEANDIR}
      set FILES = "$FILES ice_in "
   endif

   /bin/cp ${GEOSDEF}/coupled_diagnostics/g5lib/plotocn.j ${TMPOCEANDIR}
   /bin/cp ${GEOSDEF}/coupled_diagnostics/g5lib/confocn.py ${TMPOCEANDIR}/__init__.py

set FILES = "$FILES      \
             input.nml   \
             diag_table  \
             plotocn.j   \
             __init__.py"

set FILES = `echo $FILES`
endif

set FILES = "$FILES \
             fvcore_layout.rc"
set FILES = `echo $FILES`

echo " "

# Operate on files in ETCDIR

foreach FILE ($FILES)

   /bin/rm -f $HOMDIR/tmpfile
   /bin/rm -f $HOMDIR/$FILE

   if ( $FILE == "HISTORY.rc.tmpl" ) then
      cat            $TMPHIST > $HOMDIR/tmpfile
   else if ( -e $BINDIR/$FILE ) then
      cat       $BINDIR/$FILE > $HOMDIR/tmpfile
   else if ( -e $ETCDIR/$FILE ) then
      cat       $ETCDIR/$FILE > $HOMDIR/tmpfile
   else if ( -e $TMPOCEANDIR/$FILE ) then
      cat       $TMPOCEANDIR/$FILE > $HOMDIR/tmpfile
   else
      echo "ERROR! Cannot find $FILE in $BINDIR or $ETCDIR!"
      exit 2
   endif

   sed -f $HOMDIR/sedfile $HOMDIR/tmpfile > $HOMDIR/$FILE

   echo "Creating ${C1}${FILE}${CN} for Experiment: $EXPID "
   chmod 755 $HOMDIR/$FILE

end

/bin/rm -f $HOMDIR/SETENV.commands

/bin/rm -f $TMPHIST

echo $HOMDIR > $EXPDIR/.HOMDIR
echo " "

#######################################################################
#                 Produce Final script and .rc files
#######################################################################

# Comment or UN-Comment RESTARTS based on EXP Configuration
# ---------------------------------------------------------
set LH2O       = FALSE
set LMAM       = FALSE
set LCARMA     = FALSE
set LGMICHEM   = FALSE
set LSTRATCHEM = FALSE

set RSNAMES = "LH2O LMAM LCARMA LGMICHEM LSTRATCHEM"
set RSTYPES = "INTERNAL IMPORT"

set FILE = AGCM.rc.tmpl

if( -e $HOMDIR/$FILE ) set LOCDIR = $HOMDIR
if( -e $EXPDIR/$FILE ) set LOCDIR = $EXPDIR

foreach rsname ($RSNAMES)
   set  name = `echo $rsname | cut -b2-`
   set  test = `eval echo \$$rsname`
   if( $test == FALSE ) then
       foreach type ($RSTYPES)
          set  string = ${name}_${type}
          sed -i -e "s/${string}/#${string}/g" $LOCDIR/$FILE
       end
   endif
end


# Delete or Enable EXP Configuration Variables
# --------------------------------------------
    set FILES = "AGCM.rc.tmpl gcm_run.j gcm_forecast.tmpl gcm_forecast.setup HISTORY.rc.tmpl gcm_regress.j gcm_post.j gcm_emip.setup gcm_plot.tmpl linkbcs.tmpl"
foreach FILE ($FILES)

if( -e $HOMDIR/$FILE ) set LOCDIR = $HOMDIR
if( -e $EXPDIR/$FILE ) set LOCDIR = $EXPDIR

/bin/rm -f $LOCDIR/$FILE.tmp
/bin/mv -f $LOCDIR/$FILE $LOCDIR/$FILE.tmp
    cat    $LOCDIR/$FILE.tmp | awk '{ if ( $1  !~ "#DELETE") { print } }' > $LOCDIR/$FILE
/bin/rm -f $LOCDIR/$FILE.tmp

end

chmod   +x $HOMDIR/gcm_run.j
chmod   +x $HOMDIR/gcm_forecast.setup
chmod   +x $HOMDIR/gcm_regress.j
chmod   +x $HOMDIR/gcm_post.j
chmod   +x $HOMDIR/gcm_emip.setup
chmod   +x $HOMDIR/linkbcs.tmpl

#######################################################################
#         Finalizing Experiment Directories and Chem Registry
#######################################################################

# Check for Experiment Sub-Directories
# ------------------------------------
if(! -e $EXPDIR/post      ) mkdir -p $EXPDIR/post
if(! -e $EXPDIR/plot      ) mkdir -p $EXPDIR/plot
if(! -e $EXPDIR/archive   ) mkdir -p $EXPDIR/archive
if(! -e $EXPDIR/regress   ) mkdir -p $EXPDIR/regress
if(! -e $EXPDIR/forecasts ) mkdir -p $EXPDIR/forecasts

if( $OGCM == TRUE ) if(! -e $EXPDIR/RESTART ) mkdir -p $EXPDIR/RESTART


# Rename and Move Files to Relevant Experiment Work Sub-Directories
# -----------------------------------------------------------------
/bin/mv $HOMDIR/gcm_post.j          $EXPDIR/post
/bin/mv $HOMDIR/gcm_plot.tmpl       $EXPDIR/plot
/bin/mv $HOMDIR/gcm_quickplot.csh   $EXPDIR/plot
/bin/mv $HOMDIR/gcm_moveplot.j      $EXPDIR/plot
/bin/mv $HOMDIR/gcm_archive.j       $EXPDIR/archive
/bin/mv $HOMDIR/gcm_regress.j       $EXPDIR/regress
/bin/mv $HOMDIR/gcm_forecast.tmpl   $EXPDIR/forecasts
/bin/mv $HOMDIR/gcm_forecast.setup  $EXPDIR/forecasts
/bin/cp $GEOSUTIL/post/plot.rc      $EXPDIR/plot
/bin/cp $GEOSUTIL/post/post.rc      $EXPDIR/post
/bin/mv $HOMDIR/linkbcs.tmpl        $EXPDIR/linkbcs

/bin/mv $HOMDIR/CAP.rc.tmpl         $HOMDIR/CAP.rc
/bin/mv $HOMDIR/AGCM.rc.tmpl        $HOMDIR/AGCM.rc
/bin/mv $HOMDIR/HISTORY.rc.tmpl     $HOMDIR/HISTORY.rc

if( $OGCM == TRUE  & "$OCNMODEL" != "MIT" ) /bin/mv $HOMDIR/plotocn.j       $EXPDIR/plot

#######################################################################
#       Modify RC Directory for LM and GOCART.data/GOCART Options
#######################################################################

# Modify RC Files for LM
# ----------------------
if( $AGCM_LM != 72 ) then
    set files = `ls -1 $EXPDIR/RC/*.rc $EXPDIR/RC/*.yaml`
    foreach file ($files)
       /bin/rm -f    $EXPDIR/RC/dummy
       /bin/mv $file $EXPDIR/RC/dummy
       cat $EXPDIR/RC/dummy | sed -e "s|/L72/|/L${AGCM_LM}/|g" \
                            | sed -e "s|z72|z${AGCM_LM}|g"     \
                            | sed -e "s|_72_|_${AGCM_LM}_|g"   > $file
    end
endif


# Turn on PCHEM
# -------------
if( $RATS_PROVIDER == PCHEM ) then
    /bin/mv $EXPDIR/RC/GEOS_ChemGridComp.rc $EXPDIR/RC/GEOS_ChemGridComp.tmp
    cat $EXPDIR/RC/GEOS_ChemGridComp.tmp | \
    awk '{ if ($1~"ENABLE_PCHEM:") { sub(/FALSE/,"TRUE") }; print }' > $EXPDIR/RC/GEOS_ChemGridComp.rc
endif

# Turn on TR GridComp
# -------------------
    /bin/mv $EXPDIR/RC/GEOS_ChemGridComp.rc $EXPDIR/RC/GEOS_ChemGridComp.tmp
    cat $EXPDIR/RC/GEOS_ChemGridComp.tmp | \
    awk '{ if ($1~"ENABLE_TR:") { sub(/FALSE/,"TRUE") }; print }' > $EXPDIR/RC/GEOS_ChemGridComp.rc

# Update LAND_PARAMS Choices
# ------------------------------------------------------------------
/bin/mv $EXPDIR/RC/GEOS_SurfaceGridComp.rc $EXPDIR/RC/GEOS_SurfaceGridComp.tmp
cat $EXPDIR/RC/GEOS_SurfaceGridComp.tmp | sed -e 's?# GEOSagcm=>?            ?g' > $EXPDIR/RC/GEOS_SurfaceGridComp.rc

if( $LSM_CHOICE == 2 ) then
    /bin/mv $EXPDIR/RC/GEOS_SurfaceGridComp.rc $EXPDIR/RC/GEOS_SurfaceGridComp.tmp
    cat $EXPDIR/RC/GEOS_SurfaceGridComp.tmp | sed -e '/^ *LAND_PARAMS:/ s/NRv7.2/CN_CLM40/' > $EXPDIR/RC/GEOS_SurfaceGridComp.rc
endif

if( $LSM_BCS == "ICA" ) then
    /bin/mv $EXPDIR/RC/GEOS_SurfaceGridComp.rc $EXPDIR/RC/GEOS_SurfaceGridComp.tmp
    cat $EXPDIR/RC/GEOS_SurfaceGridComp.tmp | \
    awk '{ if ($1~"LAND_PARAMS:") { sub(/NRv7.2/,"Icarus") }; print }' > $EXPDIR/RC/GEOS_SurfaceGridComp.rc

    /bin/mv $EXPDIR/RC/GEOS_SurfaceGridComp.rc $EXPDIR/RC/GEOS_SurfaceGridComp.tmp
    cat $EXPDIR/RC/GEOS_SurfaceGridComp.tmp | \
    awk '{ if ($1~"Z0_FORMULATION:") { sub(/4/,"2") }; print }' > $EXPDIR/RC/GEOS_SurfaceGridComp.rc
endif

# Enable DATA_DRIVEN GOCART2G
# ---------------------------
if( $AERO_PROVIDER == GOCART2G ) then
    if ($DATA_DRIVEN == TRUE ) then
       /bin/mv $EXPDIR/RC/GOCART2G_GridComp.rc $EXPDIR/RC/GOCART2G_GridComp.tmp
       cat $EXPDIR/RC/GOCART2G_GridComp.tmp | \
          sed -e '/ACTIVE_INSTANCES_DU:/ s/DU /DU.data /' \
              -e '/ACTIVE_INSTANCES_SS:/ s/SS /SS.data /' \
              -e '/ACTIVE_INSTANCES_SU:/ s/SU /SU.data /' \
              -e '/ACTIVE_INSTANCES_NI:/ s/NI /NI.data /' \
              -e '/ACTIVE_INSTANCES_CA:/ s/CA.oc /CA.oc.data /' \
              -e '/ACTIVE_INSTANCES_CA:/ s/CA.bc /CA.bc.data /' \
              -e '/ACTIVE_INSTANCES_CA:/ s/CA.br /CA.br.data /' > $EXPDIR/RC/GOCART2G_GridComp.rc
    endif

    /bin/mv $EXPDIR/RC/GEOS_ChemGridComp.rc $EXPDIR/RC/GEOS_ChemGridComp.tmp
    cat $EXPDIR/RC/GEOS_ChemGridComp.tmp | \
    awk '{ if ($1~"ENABLE_GOCART_DATA:") { sub(/TRUE/,"FALSE") }; print }' > $EXPDIR/RC/GEOS_ChemGridComp.rc
endif

# Remove FVWORK/EXPID syntax from GAAS_GridComp.rc for use in REPLAY
# ------------------------------------------------------------------
    /bin/mv $EXPDIR/RC/GAAS_GridComp.rc $EXPDIR/RC/GAAS_GridComp.tmp
    cat $EXPDIR/RC/GAAS_GridComp.tmp | sed -e 's?${FVWORK}/${EXPID}.?aod/Y%y4/M%m2/@ANA_EXPID.?g' > $EXPDIR/RC/GAAS_GridComp.rc


# Turn on RATS_PROVIDER
# ---------------------
# (By default, doing_PC is yes in RC/Chem_Registry.rc and RC/AMIP/Chem_Registry.rc)

# Turn on TR GridComp
# ---------------------
# (By default, ENABLE_TR is TRUE in RC/GEOS_ChemGridComp.rc)


#######################################################################
#              Modify MOM input files to match HEARTBEAT
#######################################################################

if( $OGCM == TRUE ) then

   if ("$OCNMODEL" == "MOM6" ) then
      # We also must change the MOM_override file to
      # have consistent DTs with the AGCM. So we use OCEAN_DT
      # and change MOM_override to match. NOTE: This sed
      # assumes floating point number with a decimal

      sed -i -e "s/DT = [0-9]*\.[0-9]*/DT = $OCEAN_DT/g" \
             -e "s/DT_THERM = [0-9]*\.[0-9]*/DT_THERM = $OCEAN_DT/g" $HOMDIR/MOM_override
   else if ("$OCNMODEL" == "MOM5" ) then
      # With MOM5 we need to change dt lines in input.nml to
      # use $OCEAN_DT instead. NOTE: This sed assumes integer followed by comma

      sed -i -e "s/dt_cpld = [0-9]*,/dt_cpld = $OCEAN_DT,/g" \
             -e "s/dt_atmos = [0-9]*,/dt_atmos = $OCEAN_DT,/g" $HOMDIR/input.nml

   endif

   # We also need to change the dt in ice_in as well for CICE6
   if ( $SEAICE_NAME == "CICE6" ) then
      sed -i -E "s/^([[:space:]]*dt[[:space:]]*=[[:space:]]*)[0-9]+(\.[0-9]+)?/\1${OCEAN_DT}/" "$HOMDIR/ice_in"
   endif

endif

if ($DATA_ATMOS == TRUE) then
   /bin/mv $EXPDIR/RC/JRA55-DO_DataAtm_Forcings_ExtData.yaml $EXPDIR/RC/JRA55-DO_DataAtm_Forcings_ExtData.tmp
   cat  $EXPDIR/RC/JRA55-DO_DataAtm_Forcings_ExtData.tmp | sed -e "s/%OCN_RES%/${OGCM_IM}x${OGCM_JM}/g" > $EXPDIR/RC/JRA55-DO_DataAtm_Forcings_ExtData.yaml
   /bin/rm $EXPDIR/RC/JRA55-DO_DataAtm_Forcings_ExtData.tmp
endif


#######################################################################
#                       Echo Settings and Messages
#######################################################################

echo "Done!"
echo "-----"
echo " "
echo "Build Directory: ${C2}${GEOSDIR}${CN}"
echo "----------------"
echo " "
if ( $USING_SINGULARITY == TRUE ) then
   echo "Note: Now that we're in a singularity sandbox, we will run "
   echo "      GEOSgcm.x from the installation bin directory."
else
   echo " "
   echo "The following executable has been ${EXE_VERB} to your Experiment Directory:"
   echo "----------------------------------------------------------------------"
   echo "${C2}$GEOSBIN/GEOSgcm.x${CN}"
   echo " "
endif
echo " "
echo "You must now copy your ${C1}Initial Conditions${CN} into: "
echo "----------------------------------------------- "
echo "${C2}${EXPDIR}${CN}"
echo ""
echo ""

#######################################################################
#                              Clean-Up
#######################################################################

if( -e $HOMDIR/tmpfile ) /bin/rm $HOMDIR/tmpfile
if( -e $HOMDIR/sedfile ) /bin/rm $HOMDIR/sedfile

#######################################################################
#                     Copy over Source Tarfile
#######################################################################

# NOTE: This variable is set at CMake time depending on
#       how the build was configured.
set INSTALL_TARFILE = @CFG_INSTALL_SOURCE_TARFILE@
set TARFILE_NAME = "@CMAKE_PROJECT_NAME@.tar.gz"

if ( $INSTALL_TARFILE == "TRUE" ) then

   # Make a src directory under EXPDIR to hold current Experiment files
   # ------------------------------------------------------------------
   /bin/rm -rf ${EXPDIR}/src
   mkdir   -p  ${EXPDIR}/src

   echo "Copying Build Source Code into ${C2}${EXPDIR}/src${CN}"
   # -----------------------------------------------------------
   if (-e ${GEOSDEF}/src/${TARFILE_NAME}) then
      cp ${GEOSDEF}/src/${TARFILE_NAME} ${EXPDIR}/src
   else
      echo "${GEOSDEF}/src/${TARFILE_NAME} not found yet CMake was asked to make and install a tarfile."
      echo "Something went wrong."
      exit 7
   endif
   echo ""

endif

#######################################################################

exit

#######################################################################
#                         Clone old Experiment
#######################################################################

DOCLONE:

#######################################################################
#                    Enter Clone ID and Description
#######################################################################

OLDEXP:
echo
echo "Enter the ${C1}location${CN} of the experiment to clone (where gcm_run.j is located):"
set CLONEDIR = $<

if ( $CLONEDIR == "") then
   goto OLDEXP
else if ( ! -d $CLONEDIR ) then
   echo
   echo "Could not find ${CLONEDIR}"
   goto OLDEXP
endif

# ------------------------------------------------------
# To setup the clone, we need to look in a couple files,
# so make sure they are readable
# ------------------------------------------------------

if ( ! -r $CLONEDIR/gcm_run.j ) then
   echo
   echo "$CLONEDIR/gcm_run.j is not readable. Please check permissions."
   exit 1
endif

if ( ! -r $CLONEDIR/HISTORY.rc ) then
   echo
   echo "$CLONEDIR/HISTORY.rc is not readable. Please check permissions."
   exit 1
endif

# -----------------------------------------
# Grab the old EXPID, and other information
# -----------------------------------------

set  OLDEXPID=`awk '/^EXPID/ {print $2}' $CLONEDIR/HISTORY.rc`
set OLDHOMDIR=`awk '/^setenv +HOMDIR/ {print $3}' $CLONEDIR/gcm_run.j`
set OLDEXPDIR=`awk '/^setenv +EXPDIR/ {print $3}' $CLONEDIR/gcm_run.j`
set   OLDUSER=`/bin/ls -l $CLONEDIR/gcm_run.j | awk '{print $3}'`

setenv ARCH      `uname`
setenv GEOSDIR  /`grep "setenv GEOSDIR" $CLONEDIR/gcm_run.j | cut -d'/' -f2-`
setenv GEOSSRC  ${GEOSDIR}
setenv GEOSBIN  ${GEOSDIR}/bin
setenv GEOSETC  ${GEOSDIR}/etc
setenv GEOSUTIL ${GEOSDIR}
setenv GCMVER   `cat ${GEOSETC}/.AGCM_VERSION`

# -------------------------------------------------
# Figure out how this person usually runs the model
# -------------------------------------------------

if ( ! -e $HOME/.HOMDIRroot || ! -e $HOME/.EXPDIRroot ) then
   if ( -e $HOME/.HOMDIRroot && ! -e $HOME/.EXPDIRroot ) then
      echo "$HOME/.EXPDIRroot was not found."
      echo "Please run gcm_setup in non-clone mode at least once to use this script."
      exit 1
   else if ( ! -e $HOME/.HOMDIRroot && -e $HOME/.EXPDIRroot ) then
      echo "$HOME/.HOMDIRroot was not found."
      echo "Please run gcm_setup in non-clone mode at least once to use this script."
      exit 1
   else
      echo "$HOME/.HOMDIRroot and $HOME/.EXPDIRroot were not found."
      echo "Please run gcm_setup in non-clone mode at least once to use this script."
      exit 1
   endif
endif

# MAT There are two thoughts here. You can either place the clone in
# the .HOMDIRroot/.EXPDIRroot, but that is only nice if you have one
# single place you put all your experiments. What if you have lots of
# directories? Instead, let us default to the directory root of the
# cloned experiment if the cloned experiment is yours. If it isn't your
# experiment you are cloning, then default to the values in the dotfile

if ( $OLDUSER == $LOGNAME) then
   set HOMDIRroot=`dirname $OLDHOMDIR`
   set EXPDIRroot=`dirname $OLDEXPDIR`
else
   set HOMDIRroot=`cat $HOME/.HOMDIRroot`
   set EXPDIRroot=`cat $HOME/.EXPDIRroot`
endif

echo "Setting HOMDIR to $HOMDIRroot"
echo "Setting EXPDIR to $EXPDIRroot"

if ( -e $HOME/.GROUProot ) then
   set GROUProot=`cat $HOME/.GROUProot`
   echo "Using account $GROUProot"
else
   echo "$HOME/.GROUProot not found."
   set GROUProot=`groups | awk '{print $1}'`
   echo "Based off of groups, setting account to $GROUProot"
endif

# -----------------------------------------------
# Find out if we are running the cube and/or OGCM
# -----------------------------------------------

# First we need to find out if we are running in coupled mode
# To do this, we look for "OCEAN_NAME" in AGCM.rc:

set OGCM = `grep "OCEAN_NAME" ${OLDHOMDIR}/AGCM.rc | wc -l`

if ( $OGCM == 1 ) then
   set OGCM = TRUE
   # Now we need to find out if we are running MOM or MOM6 by looking
   # at OCEAN_NAME: val and checking if it is MOM or MOM6
   set OCNMODEL = `grep "OCEAN_NAME" ${OLDHOMDIR}/AGCM.rc | cut -d: -f2 | tr -d ' '`
   set SEAICEMODEL = `grep "SEAICE_NAME" ${OLDHOMDIR}/AGCM.rc | cut -d: -f2 | tr -d ' '`
else if ( $OGCM == 0 ) then
   set OGCM = FALSE
else
   echo "Found more than one OCEAN_NAME in ${OLDHOMDIR}/AGCM.rc"
   echo "This is not allowed. Please fix this and try again."
   exit 1
endif

# ------------------------------------------------
# Set the new EXPDIR and HOMDIR based on the roots
# ------------------------------------------------
set  NEWEXPID=$EXPID
set NEWEXPDIR=$EXPDIRroot/$NEWEXPID
set NEWHOMDIR=$HOMDIRroot/$NEWEXPID

# -----------------------------------------
# If the new EXPDIR and HOMDIR exist, exit!
# -----------------------------------------

if ( -d $NEWEXPDIR ) then
   echo "$NEWEXPDIR already exists! Exiting!"
   exit 2
endif

if ( -d $NEWHOMDIR ) then
   echo "$NEWHOMDIR already exists! Exiting!"
   exit 3
endif

# -----------------------------------
# Make all our needed temporary files
# -----------------------------------

set FILES_TO_PROCESS=`mktemp`
set OLDEXPFILES=`mktemp`
set NEWEXPFILES=`mktemp`
set COPYSCRIPT=`mktemp`
set SEDFILE=`mktemp`


# --------------------------
# Setup the files to process
# --------------------------

cat > $FILES_TO_PROCESS << EOF
EXPDIR/post/gcm_post.j
EXPDIR/plot/gcm_plot.tmpl
EXPDIR/plot/gcm_quickplot.csh
EXPDIR/plot/gcm_moveplot.j
EXPDIR/archive/gcm_archive.j
EXPDIR/regress/gcm_regress.j
EXPDIR/forecasts/gcm_forecast.tmpl
EXPDIR/forecasts/gcm_forecast.setup
EXPDIR/plot/plot.rc
EXPDIR/post/post.rc
EXPDIR/linkbcs
HOMDIR/CAP.rc
HOMDIR/AGCM.rc
HOMDIR/HISTORY.rc
HOMDIR/gcm_run.j
HOMDIR/gcm_emip.setup
HOMDIR/logging.yaml
EOF

if( $OGCM == TRUE ) then

if ("$OCNMODEL" != "MIT" ) then

# Some files are common to both MOM and MOM6
cat >> $FILES_TO_PROCESS << EOF
HOMDIR/input.nml
HOMDIR/diag_table
HOMDIR/__init__.py
EXPDIR/plot/plotocn.j
EOF
endif

# Some files are specific to MOM
if ( "$OCNMODEL" == "MOM" ) then
cat >> $FILES_TO_PROCESS << EOF
HOMDIR/field_table
EOF
endif

# Some files are specific to MOM6
if ( "$OCNMODEL" == "MOM6" ) then
cat >> $FILES_TO_PROCESS << EOF
HOMDIR/MOM_override
HOMDIR/MOM_input
HOMDIR/data_table
EOF
endif

if ( "$SEAICEMODEL" == "CICE6" ) then
cat >> $FILES_TO_PROCESS << EOF
HOMDIR/ice_in
EOF
endif

endif

cat >> $FILES_TO_PROCESS << EOF
HOMDIR/fvcore_layout.rc
EOF

# ------------------------------------------------
# Create two sets of files so we can copy from one
# directory to another.
# ------------------------------------------------

# Then alter them
# ---------------

sed -e "/^EXPDIR/ s#EXPDIR#$OLDEXPDIR#" \
    -e "/^HOMDIR/ s#HOMDIR#$OLDHOMDIR#"   $FILES_TO_PROCESS > $OLDEXPFILES

sed -e "/^EXPDIR/ s#EXPDIR#$NEWEXPDIR#" \
    -e "/^HOMDIR/ s#HOMDIR#$NEWHOMDIR#"   $FILES_TO_PROCESS > $NEWEXPFILES

# -----------------------------------------
# Now, use paste to join these two files...
# ...add a cp in front of the lines.
# -----------------------------------------

paste $OLDEXPFILES $NEWEXPFILES | sed -e "s/.*/cp -a &/" > $COPYSCRIPT

# ------------------------
# Make the new directories
# ------------------------

foreach file (`cat $NEWEXPFILES`)
   set dir=`dirname $file`
   /bin/mkdir -p $dir
end

# -------------------
# Run the copy script
# -------------------

sh $COPYSCRIPT

# ----------------------------------------------------
# Create or copy over files that don't need processing
# ----------------------------------------------------

echo "$NEWHOMDIR" >> $NEWEXPDIR/.HOMDIR
/bin/cp $OLDEXPDIR/GEOSgcm.x $NEWEXPDIR
/bin/cp -a $OLDEXPDIR/RC $NEWEXPDIR/RC

# -----------------------------------------------------
# Now actually change the various environment variables
# -----------------------------------------------------

cat > $SEDFILE << EOF
/^setenv \+EXPDIR/ s#$OLDEXPDIR#$NEWEXPDIR#
/^setenv \+HOMDIR/ s#$OLDHOMDIR#$NEWHOMDIR#
/^setenv \+EXPID/  s#$OLDEXPID#$NEWEXPID#
/^set \+EXPDIR/ s#$OLDEXPDIR#$NEWEXPDIR#
/^set \+HOMDIR/ s#$OLDHOMDIR#$NEWHOMDIR#
/^set \+EXPID/  s#$OLDEXPID#$NEWEXPID#
/^EXPID:/  s#$OLDEXPID#$NEWEXPID#
/GEOSUTIL\/post\/gcmpost.script/ s#$OLDEXPDIR#$NEWEXPDIR#
/group_list/ s#\(group_list=\)\(.*\)#\1$GROUProot#
/^#SBATCH -A/ s#\(SBATCH -A \)\(.*\)#\1$GROUProot#
/^#SBATCH --account=/ s#\(SBATCH --account=\)\(.*\)#\1$GROUProot#
EOF

foreach file (`cat $NEWEXPFILES`)
   sed -i -f $SEDFILE $file
end

# ------------------------------------------
# Change the EXPDSC in HISTORY.rc to reflect
# the fact this experiment was cloned
# ------------------------------------------

#sed -i -e "/^EXPDSC:/ s#\(EXPDSC: \)\(.*\)#\1${NEWEXPID}_clonedfrom_${OLDEXPID}_by_${OLDUSER}#" $NEWHOMDIR/HISTORY.rc
 sed -i -e "/^EXPDSC:/ s#\(EXPDSC: \)\(.*\)#\1${EXPDSC}#" $NEWHOMDIR/HISTORY.rc
 sed -i -e "/^EXPID:/ s#\(EXPID: \)\(.*\)#\1${NEWEXPID}#" $NEWHOMDIR/HISTORY.rc

# Change OLDEXPID to NEWEXPID in __init__.py if it exists
# -------------------------------------------------------
if ( -e $NEWHOMDIR/__init__.py ) then
   sed -i -e "/$OLDEXPID/ s#$OLDEXPID#$NEWEXPID#" $NEWHOMDIR/__init__.py
endif

# -------------------------
# Construct the new job ids
# -------------------------

    set RUN_N=`echo $NEWEXPID | cut -b1-200`_RUN
   set RUN_FN=`echo $NEWEXPID | cut -b1-200`_FCST
   set POST_N=`echo $NEWEXPID | cut -b1-199`_POST
   set PLOT_N=`echo $NEWEXPID | cut -b1-200`_PLT
   set MOVE_N=`echo $NEWEXPID | cut -b1-200`_MOVE
set ARCHIVE_N=`echo $NEWEXPID | cut -b1-199`_ARCH
set REGRESS_N=`echo $NEWEXPID | cut -b1-199`_RGRS

sed -i -e "/^#PBS -N/ s#\(PBS -N \)\(.*\)#\1$RUN_N#"     \
       -e "/^#SBATCH --job-name=/ s#\(SBATCH --job-name=\)\(.*\)#\1$RUN_N#"     $NEWHOMDIR/gcm_run.j
sed -i -e "/^#PBS -N/ s#\(PBS -N \)\(.*\)#\1$RUN_FN#"    \
       -e "/^#SBATCH --job-name=/ s#\(SBATCH --job-name=\)\(.*\)#\1$RUN_FN#"    $NEWEXPDIR/forecasts/gcm_forecast.tmpl
sed -i -e "/^#PBS -N/ s#\(PBS -N \)\(.*\)#\1$POST_N#"    \
       -e "/^#SBATCH --job-name=/ s#\(SBATCH --job-name=\)\(.*\)#\1$POST_N#" \
       -e "/^setenv BATCHNAME/ s#\(setenv BATCHNAME *\)\(.*\)#\1 $POST_N#"      $NEWEXPDIR/post/gcm_post.j
sed -i -e "/^#PBS -N/ s#\(PBS -N \)\(.*\)#\1$PLOT_N#"    \
       -e "/^#SBATCH --job-name=/ s#\(SBATCH --job-name=\)\(.*\)#\1$PLOT_N#"    $NEWEXPDIR/plot/gcm_plot.tmpl

if ( -e $NEWEXPDIR/plot/gcm_moveplot.j ) then
   sed -i -e "/^#PBS -N/ s#\(PBS -N \)\(.*\)#\1$MOVE_N#"    \
          -e "/^#SBATCH --job-name=/ s#\(SBATCH --job-name=\)\(.*\)#\1$MOVE_N#" $NEWEXPDIR/plot/gcm_moveplot.j
endif

sed -i -e "/^#PBS -N/ s#\(PBS -N \)\(.*\)#\1$ARCHIVE_N#" \
       -e "/^#SBATCH --job-name=/ s#\(SBATCH --job-name=\)\(.*\)#\1$ARCHIVE_N#" $NEWEXPDIR/archive/gcm_archive.j
sed -i -e "/^#PBS -N/ s#\(PBS -N \)\(.*\)#\1$REGRESS_N#" \
       -e "/^#SBATCH --job-name=/ s#\(SBATCH --job-name=\)\(.*\)#\1$REGRESS_N#" $NEWEXPDIR/regress/gcm_regress.j

# --------------------------
# Echo Settings and Messages
# --------------------------

echo "Done with cloning!"
echo "------------------"
echo " "
echo "Original Experiment Directory: ${C2}${OLDEXPDIR}${CN}"
echo "------------------------------"
echo " "
echo "You must now copy your ${C1}Initial Conditions${CN} into: "
echo "----------------------------------------------- "
echo "${C2}${NEWEXPDIR}${CN}"
echo ""
echo ""

# -------------------------
# Clean up the mktemp files
# -------------------------

/bin/rm $FILES_TO_PROCESS
/bin/rm $OLDEXPFILES
/bin/rm $NEWEXPFILES
/bin/rm $COPYSCRIPT
/bin/rm $SEDFILE
# TMPHIST and TMPOCEANDIR are not defined if cloning
if ( $KLONE == "FALSE" ) then
   /bin/rm -f $TMPHIST
   /bin/rm -rf $TMPOCEANDIR
endif

# ------------------------
# Cloned Experiment Source
# ------------------------

# NOTE: This variable is set at CMake time depending on
#       how the build was configured.
set INSTALL_TARFILE = @CFG_INSTALL_SOURCE_TARFILE@
set TARFILE_NAME = "@CMAKE_PROJECT_NAME@.tar.gz"

if ( $INSTALL_TARFILE == "TRUE" ) then

   # Make a src directory under EXPDIR to hold current Experiment files
   # ------------------------------------------------------------------
   /bin/rm -rf ${NEWEXPDIR}/src
   mkdir   -p  ${NEWEXPDIR}/src

   echo "Copying Build Source Code into ${C2}${NEWEXPDIR}/src${CN}"
   # --------------------------------------------------------------
   if (-e ${GEOSDEF}/src/${TARFILE_NAME}) then
      cp ${GEOSDEF}/src/${TARFILE_NAME} ${NEWEXPDIR}/src
   else
      echo "${GEOSDEF}/src/${TARFILE_NAME} not found yet CMake was asked to make and install a tarfile."
      echo "Something went wrong."
      exit 7
   endif
   echo ""

endif

exit

# ------------------------------------------
# Set a trap to remove the tempfiles on EXIT
# ------------------------------------------
TRAP:
   echo "Interrupt received, cleaning up temporary files"
   /bin/rm -f $FILES_TO_PROCESS $OLDEXPFILES $NEWEXPFILES $COPYSCRIPT $SEDFILE $TMPHIST
   /bin/rm -rf $TMPOCEANDIR
   exit 1

#######################################################################
#                      Usage and Error Outputs
#######################################################################

SETCOLOR:
echo
echo "\033[1;4mGCM Setup Utility${RESET}"
echo
echo "Enter Desired Color Codes for ${BOLD}Highlighted${RESET} and ${BOLD}Default${RESET} text:"
echo
echo "${BOLD}Highlighted${RESET} Text Color: ${BLACK}0 BLACK${RESET}"
echo "                 Color: ${RED}1 RED${RESET}"
echo "                 Color: ${GREEN}2 GREEN${RESET}"
echo "                 Color: ${YELLOW}3 YELLOW${RESET}"
echo "                 Color: ${BLUE}4 BLUE${RESET}"
echo "                 Color: ${MAGENTA}5 MAGENTA${RESET}"
echo "                 Color: ${CYAN}6 CYAN${RESET}"
echo "                 Color: ${WHITE}7 WHITE${RESET}"
echo "                 Color: ${RESET}8 No Color"
set C1 = $<
  @ C1 = $C1 + 1
echo
echo "    ${BOLD}Default${RESET} Text Color: ${BLACK}0 BLACK${RESET}"
echo "                 Color: ${RED}1 RED${RESET}"
echo "                 Color: ${GREEN}2 GREEN${RESET}"
echo "                 Color: ${YELLOW}3 YELLOW${RESET}"
echo "                 Color: ${BLUE}4 BLUE${RESET}"
echo "                 Color: ${MAGENTA}5 MAGENTA${RESET}"
echo "                 Color: ${CYAN}6 CYAN${RESET}"
echo "                 Color: ${WHITE}7 WHITE${RESET}"
echo "                 Color: ${RESET}8 No Color"
set C2 = $<
  @ C2 = $C2 + 1
if( -e $HOME/.GCMSETUP ) /bin/rm -f $HOME/.GCMSETUP
touch $HOME/.GCMSETUP
echo $COLORS[$C1] >> $HOME/.GCMSETUP
echo $COLORS[$C2] >> $HOME/.GCMSETUP
exit 1

USAGE:
cat <<EOF
gcm_setup, a setup script for the GEOS GCM

   Usage: $0:t [optional flag]

   -c --color        Set the colors for $0:t
      --link         Link GEOSgcm.x into experiment directory
   -h --help         Show usage

   If invoked alone, the script runs as normal.

   For more information, please contact Matt Thompson or Scott Rabenhorst

EOF
exit 1