HP Microserver Gen 8 doesn’t boot after upgrade to DSM 7.3-86009

[noelrefer]

Hello,

I have HP Gen8 Microserver running DSM. While running older bootloader I had upgraded it to DSM 7.3-86009 after which it didn't boot any longer.

I upgraded bootloader to 26.2.0 but it still didn’t boot. The IP is not accessible and the find.synology.com doesn't find any device. Ping doesn’t work.

I have tried rebuilding, which didn't help. Tried Force DSM reinstall, but the IP was still not accessible.

I'm using DS3622XS+ as model.

Today upgraded bootloader to 26.2.1 and selected the model and version again and rebuilt the loader. This didn’t help.

I just rebuild the loader again in menu, but it’s still not accessible.

Hope my data is fine.

I hope I have all the info you need described, please help me. Currently so tired that I feel hopeless.

[github-actions]

请填写以下信息.
Please fill in the following information.

Install ENV: (You can find it in the boot interface.)

• DMI:
• CPU:
• NIC: (pid & vid)

RR version: (You can find it in the update menu.)

• RR:
• addons:
• modules:
• lkms:

DSM:

• model:
• version:

Issue:

logs:

(## 因为 log中存在 SN/MAC 等一些敏感信息, 当提供完整文件时请自行抹除他们, 当然你也可以发送到我的邮箱. ##)
(## Because the log contains some sensitive information such as SN/MAC, please delete them when providing the complete file. Of course, you can also send it to my email. ##)
...

(请先看一下#173、#175、#226 的内容)
(Plz review the content of #173, #175, #226 first)
...

(如果你只是说 XXX 不能用, 什么详细信息也不提供, 我也只能说感谢你的反馈.)
(If you just say XXX doesn't work without providing any details, I can only say thank you for your feedback.)
...

[noelrefer]

Hardware
• HP ProLiant MicroServer Gen8
• BIOS: J06 (11/02/2015)
• CPU: Intel Celeron G1610T @ 2.30GHz
• RAM: 16GB

Platform

DS3622xs+

Kernel: official
LKM: prod
MEV: physical
DMI: HP ProLiant MicroServer Gen8, BIOS J06 11/02/2015
CPU: Intel(R) Celeron(R) CPU G1610T @ 2.30GHz
MEM: 15950 MB

Cmdline:
earlyprintk syno_hw_version=DS3622xs+ console=ttyS0,115200n8 consoleblank=600
netif_num=2 noefi pid=0x4030 earlycon=uart8250,io,0x3f8,115200n8
mac1=REDACTED sn=REDACTED mac2=REDACTED
modprobe.blacklist=REDACTED_FROM_SCREENSHOT
SataPortMap=1 DiskIdxMap=00
root=/dev/md0

Detected 2 network cards.
eth0 eth1 connected.

Waiting IP...

eth0(REDACTED): Access http://REDACTED:5000 to connect the DSM via web.
eth1(REDACTED): Access http://REDACTED:5000 to connect the DSM via web.

Loading DSM kernel ...
Booting ...

Interface not operational. Wait a few minutes.
Find DSM via http://find.synology.com/ or Synology Assistant.

root@rr:/opt/rr#

[wjz304]

try Direct boot: true

[noelrefer]

Just tried setting direct boot to true and rebooting.
find.synology.com doesn’t find any device, and ping doesn’t work.