[network::brocade::snmp::plugin] mode "hardware" and Brocade 5480 Embedded Blade Switch (HP AJ821B)

[Aleksey-Maksimov]

Hello

We're trying to use a "network::brocade::snmp::plugin" to monitor Brocade 5480 Embedded Blade Switches (a.k.a. HP B-series 8/24c SAN Switch BladeSystem c-Class AJ821B).
The problem is that in "hardware" mode the plugin does not show information about the switch's temperature sensors.

~# ./centreon_plugins.pl' '--plugin=network::brocade::snmp::plugin' '--mode=hardware' 
'--filter-perfdata-adv' '--hostname' 'SW42' '--snmp-community' 'x' 
'--snmp-version' '2c' '--use-new-perfdata' --verbose

OK: All 0 components are ok [].
Checking switch
Checking sensors

At the same time, the switch itself displays this data:

SW42:admin> sensorShow

sensor  1: (Temperature) is Ok, value is 26 C
sensor  2: (Temperature) is Ok, value is 33 C

SW42:admin> tempShow
Sensor  State        Centigrade      Fahrenheit
  ID
====================================================
  1     Ok               26                78
  2     Ok               33                91

[lucie-tirand]

Hello :)

If a hardware mode returns OK: All 0 components are ok []. I suspect your plugins version is not up to date because now it should raise a critical since the 25.10 release and this PR: #5677

Also as it stands, the plugin does not appear to retrieve temperature information from the switches:

my $mapping_global = {
    swFirmwareVersion   => { oid => '.1.3.6.1.4.1.1588.2.1.1.1.1.6' },
    swOperStatus        => { oid => '.1.3.6.1.4.1.1588.2.1.1.1.1.7', map => \%map_oper_status }
};

https://github.com/centreon/centreon-plugins/blob/develop/src/network/brocade/snmp/mode/hardware.pm#L211C1-L214C3

This is a very minor enhancement. Could you provide us with an extract of snmpwalk data so that we can implement it?

[Aleksey-Maksimov]

I suspect your plugins version is not up to date

I understand your point, and it's fair.
However, my plugins aren't significantly outdated.
I keep up with new versions, and there haven't been any changes regarding Brocade support for my version of the plugins.

Also as it stands, the plugin does not appear to retrieve temperature information from the switches

This doesn't seem to be true.
We have other Brocade G620 switches, and the plugin successfully polls sensors for them:

# './centreon_plugins.pl' '--plugin=network::brocade::snmp::plugin' '--mode=hardware' 
'--authpassphrase' 'x' '--authprotocol' 'MD5' '--privpassphrase' 'x' '--privprotocol' 'DES'
'--change-perfdata' '.*,,eval(%(label) =~ s/#hardware//g)' '--filter-perfdata-adv' 'not (%(label) =~ /\.count/)' 
'--filter-uom' 'null' '--hostname' '10.1.2.22' '--snmp-username' 'monit' '--snmp-version' '3' 
'--use-new-perfdata' '--warning' 'temperature,.*,60' '--warning' 'fan,.*,3000:9000'

OK: All 12 components are ok [11/11 sensors, 1/1 switch]. | 
'SLOT #0: TEMP #1.sensor.temperature.celsius'=26;0:60;;; 
'SLOT #0: TEMP #2.sensor.temperature.celsius'=35;0:60;;; 
'SLOT #0: TEMP #3.sensor.temperature.celsius'=31;0:60;;; 
'SLOT #0: TEMP #4.sensor.temperature.celsius'=31;0:60;;; 
'SLOT #0: TEMP #5.sensor.temperature.celsius'=29;0:60;;; 
'SLOT #0: TEMP #6.sensor.temperature.celsius'=27;0:60;;; 
'SLOT #0: TEMP #7.sensor.temperature.celsius'=47;0:60;;; 
'FAN #1.sensor.fan.rpm'=7949;3000:9000;;; 
'FAN #2.sensor.fan.rpm'=7949;3000:9000;;;

I can't provide a complete SNMP walkthrough for our Brocade 5480 switches, as it contains a lot of sensitive information.
Please understand this.
However, if we query the Brocade 5480 switches via FCMGMT-MIB (.1.3.6.1.3.94.1.8), we see that sensor information is available to us via SNMP:

Name/OID: connUnitSensorUnitId.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1; Value (OctetString): 0x10 00 50 EB 1A 41 3B AA 00 00 00 00 00 00 00 00
Name/OID: connUnitSensorUnitId.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2; Value (OctetString): 0x10 00 50 EB 1A 41 3B AA 00 00 00 00 00 00 00 00
Name/OID: connUnitSensorIndex.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1; Value (Integer): 1
Name/OID: connUnitSensorIndex.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2; Value (Integer): 2
Name/OID: connUnitSensorName.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1; Value (OctetString): SLOT #0: TEMP #1
Name/OID: connUnitSensorName.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2; Value (OctetString): SLOT #0: TEMP #2
Name/OID: connUnitSensorStatus.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1; Value (Integer): ok (3)
Name/OID: connUnitSensorStatus.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2; Value (Integer): ok (3)
Name/OID: connUnitSensorInfo.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1; Value (OctetString): 
Name/OID: connUnitSensorInfo.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2; Value (OctetString): 
Name/OID: connUnitSensorMessage.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1; Value (OctetString): sensor  1: type 8 is OK, value is 24
Name/OID: connUnitSensorMessage.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2; Value (OctetString): sensor  2: type 8 is OK, value is 26
Name/OID: connUnitSensorType.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1; Value (Integer): board (8)
Name/OID: connUnitSensorType.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2; Value (Integer): board (8)
Name/OID: connUnitSensorCharacteristic.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1; Value (Integer): temperature (3)
Name/OID: connUnitSensorCharacteristic.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2; Value (Integer): temperature (3)

[lucie-tirand]

Hello :)

I keep up with new versions, and there haven't been any changes regarding Brocade support for my version of the plugins.

The hardware modes corrections affected all modes derived from the hardware template, but it was not reported more generally in the release note.

We have other Brocade G620 switches, and the plugin successfully polls sensors for them:

Please note that these temperature values are applied to the sensors metrics and not the switch metrics, and their mappings are different ;)

my $mapping = {
    swSensorType    => { oid => '.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2', map => \%map_type },
    swSensorStatus  => { oid => '.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3', map => \%map_status },
    swSensorValue   => { oid => '.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4' },
    swSensorInfo    => { oid => '.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5' }
};

So in your case, it seems that the switches are not listed as either sensors or switches. Therefore, the OIDs requested by the sensor mapping are certainly not applicable for these switch models. This is therefore an enhancement to the mode for managing a new switch model.

[Aleksey-Maksimov]

What do I need to do to make the Brocade 5480 sensors polling work in the plugin?

[lucie-tirand]

In your case, we should consider adding a mapping similar to the WD NAS SNMP hardware mode:

centreon-plugins/src/storage/wd/nas/snmp/mode/hardware.pm

Lines 115 to 135 in 8878c56

	ex2 => {
	system => {
	temperature => { oid => '.1.3.6.1.4.1.5127.1.1.1.2.1.7' },
	fanStatus => { oid => '.1.3.6.1.4.1.5127.1.1.1.2.1.8' }
	},
	drive => {
	serial => { oid => '.1.3.6.1.4.1.5127.1.1.1.2.1.10.1.4' },
	temperature => { oid => '.1.3.6.1.4.1.5127.1.1.1.2.1.10.1.5' }
	},
	driveTable => '.1.3.6.1.4.1.5127.1.1.1.2.1.10.1'
	},
	ex2ultra => {
	system => {
	temperature => { oid => '.1.3.6.1.4.1.5127.1.1.1.8.1.7' },
	fanStatus => { oid => '.1.3.6.1.4.1.5127.1.1.1.8.1.8' }
	},
	drive => {
	serial => { oid => '.1.3.6.1.4.1.5127.1.1.1.8.1.10.1.4' },
	temperature => { oid => '.1.3.6.1.4.1.5127.1.1.1.8.1.10.1.5' }
	},
	driveTable => '.1.3.6.1.4.1.5127.1.1.1.8.1.10.1'

To do this, we need the equivalent of the SNMPwalk .1.3.6.1.3.94.1.8 that you extracted yesterday (I can't handle it the way you posted it) for your 5480 switches.
And to ensure that we do not break the mode for the switches that it currently supports, a SNMPWalk .1.3.6.1.4.1.1588.2.1.1.1.1 or the output with --debug option set for the G620 switches that you showed earlier. These two data sets should allow us to verify both behaviours.

You can anonymize all fields that need it.

[Aleksey-Maksimov]

Brocade 5480 Embedded Blade Switch 1

.1.3.6.1.3.94.1.8.1.1.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.1 = Hex-STRING: 10 00 50 EB 1A 3E 83 25 00 00 00 00 00 00 00 00
.1.3.6.1.3.94.1.8.1.1.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.2 = Hex-STRING: 10 00 50 EB 1A 3E 83 25 00 00 00 00 00 00 00 00
.1.3.6.1.3.94.1.8.1.2.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.1 = INTEGER: 1
.1.3.6.1.3.94.1.8.1.2.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.2 = INTEGER: 2
.1.3.6.1.3.94.1.8.1.3.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.1 = STRING: "SLOT #0: TEMP #1"
.1.3.6.1.3.94.1.8.1.3.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.2 = STRING: "SLOT #0: TEMP #2"
.1.3.6.1.3.94.1.8.1.4.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.1 = INTEGER: 3
.1.3.6.1.3.94.1.8.1.4.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.2 = INTEGER: 3
.1.3.6.1.3.94.1.8.1.5.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.1 = ""
.1.3.6.1.3.94.1.8.1.5.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.2 = ""
.1.3.6.1.3.94.1.8.1.6.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.1 = STRING: "sensor  1: type 8 is OK, value is 26"
.1.3.6.1.3.94.1.8.1.6.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.2 = STRING: "sensor  2: type 8 is OK, value is 33"
.1.3.6.1.3.94.1.8.1.7.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.1 = INTEGER: 8
.1.3.6.1.3.94.1.8.1.7.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.2 = INTEGER: 8
.1.3.6.1.3.94.1.8.1.8.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.1 = INTEGER: 3
.1.3.6.1.3.94.1.8.1.8.16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.2 = INTEGER: 3

Brocade 5480 Embedded Blade Switch 2:

.1.3.6.1.3.94.1.8.1.1.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1 = Hex-STRING: 10 00 50 EB 1A 41 3B AA 00 00 00 00 00 00 00 00
.1.3.6.1.3.94.1.8.1.1.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2 = Hex-STRING: 10 00 50 EB 1A 41 3B AA 00 00 00 00 00 00 00 00
.1.3.6.1.3.94.1.8.1.2.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1 = INTEGER: 1
.1.3.6.1.3.94.1.8.1.2.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2 = INTEGER: 2
.1.3.6.1.3.94.1.8.1.3.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1 = STRING: "SLOT #0: TEMP #1"
.1.3.6.1.3.94.1.8.1.3.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2 = STRING: "SLOT #0: TEMP #2"
.1.3.6.1.3.94.1.8.1.4.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1 = INTEGER: 3
.1.3.6.1.3.94.1.8.1.4.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2 = INTEGER: 3
.1.3.6.1.3.94.1.8.1.5.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1 = ""
.1.3.6.1.3.94.1.8.1.5.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2 = ""
.1.3.6.1.3.94.1.8.1.6.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1 = STRING: "sensor  1: type 8 is OK, value is 25"
.1.3.6.1.3.94.1.8.1.6.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2 = STRING: "sensor  2: type 8 is OK, value is 26"
.1.3.6.1.3.94.1.8.1.7.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1 = INTEGER: 8
.1.3.6.1.3.94.1.8.1.7.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2 = INTEGER: 8
.1.3.6.1.3.94.1.8.1.8.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1 = INTEGER: 3
.1.3.6.1.3.94.1.8.1.8.16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2 = INTEGER: 3

Brocade G620 Switch:

.1.3.6.1.4.1.1588.2.1.1.1.1.1.0 = STRING: "Thu Dec  4 15:09:34 2025"
.1.3.6.1.4.1.1588.2.1.1.1.1.2.0 = STRING: "Thu Aug 18 14:51:08 2022"
.1.3.6.1.4.1.1588.2.1.1.1.1.4.0 = STRING: "Thu Aug 11 16:00:41 2022"
.1.3.6.1.4.1.1588.2.1.1.1.1.5.0 = STRING: "Thu Aug 11 16:02:13 2022"
.1.3.6.1.4.1.1588.2.1.1.1.1.6.0 = STRING: "v9.x.x"
.1.3.6.1.4.1.1588.2.1.1.1.1.7.0 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.8.0 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.10.0 = STRING: "none"
.1.3.6.1.4.1.1588.2.1.1.1.1.11.0 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.12.0 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.13.0 = ""
.1.3.6.1.4.1.1588.2.1.1.1.1.14.0 = ""
.1.3.6.1.4.1.1588.2.1.1.1.1.15.0 = ""
.1.3.6.1.4.1.1588.2.1.1.1.1.16.0 = ""
.1.3.6.1.4.1.1588.2.1.1.1.1.18.0 = INTEGER: 2
.1.3.6.1.4.1.1588.2.1.1.1.1.19.0 = INTEGER: 2
.1.3.6.1.4.1.1588.2.1.1.1.1.20.0 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.21.0 = INTEGER: 11
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.1 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.2 = INTEGER: 2
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.3 = INTEGER: 3
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.4 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.5 = INTEGER: 5
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.6 = INTEGER: 6
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.7 = INTEGER: 7
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.8 = INTEGER: 8
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.9 = INTEGER: 9
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.10 = INTEGER: 10
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.11 = INTEGER: 11
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.1 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.2 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.3 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.4 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.5 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.6 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.7 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.8 = INTEGER: 2
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.9 = INTEGER: 2
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.10 = INTEGER: 3
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.11 = INTEGER: 3
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.1 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.2 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.3 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.4 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.5 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.6 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.7 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.8 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.9 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.10 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.11 = INTEGER: 4
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.1 = INTEGER: 26
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.2 = INTEGER: 34
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.3 = INTEGER: 30
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.4 = INTEGER: 30
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.5 = INTEGER: 29
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.6 = INTEGER: 25
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.7 = INTEGER: 46
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.8 = INTEGER: 7767
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.9 = INTEGER: 8141
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.10 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.11 = INTEGER: 1
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.1 = STRING: "SLOT #0: TEMP #1"
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.2 = STRING: "SLOT #0: TEMP #2"
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.3 = STRING: "SLOT #0: TEMP #3"
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.4 = STRING: "SLOT #0: TEMP #4"
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.5 = STRING: "SLOT #0: TEMP #5"
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.6 = STRING: "SLOT #0: TEMP #6"
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.7 = STRING: "SLOT #0: TEMP #7"
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.8 = STRING: " FAN #1"
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.9 = STRING: " FAN #2"
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.10 = STRING: " Power Supply #1"
.1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.11 = STRING: " Power Supply #2"
.1.3.6.1.4.1.1588.2.1.1.1.1.24.0 = INTEGER: 0
.1.3.6.1.4.1.1588.2.1.1.1.1.25.0 = IpAddress: xx.xx.xx.xx
.1.3.6.1.4.1.1588.2.1.1.1.1.26.0 = IpAddress: 255.255.255.0
.1.3.6.1.4.1.1588.2.1.1.1.1.27.0 = IpAddress: 0.0.0.0
.1.3.6.1.4.1.1588.2.1.1.1.1.28.0 = IpAddress: 0.0.0.0
.1.3.6.1.4.1.1588.2.1.1.1.1.31.0 = INTEGER: 3
.1.3.6.1.4.1.1588.2.1.1.1.1.38.0 = INTEGER: 2

[lucie-tirand]

Hello :)

I have created a dev branch to offer you a solution that gives the following results:

Brocade 5480 Embedded Blade Switch 1

perl centreon_plugins.pl --plugin=network::brocade::snmp::plugin --hostname=localhost --snmp-version=2c --snmp-community=XXX--snmp-port=XXXX --mode=hardware --warning='temperature,.*,30' --verbose

WARNING: board sensor 'SLOT #0: TEMP #2' is 33 celsius | 'SLOT #0: TEMP #1#hardware.sensor.board.temperature.celsius'=26celsius;0:30;;; 'SLOT #0: TEMP #2#hardware.sensor.board.temperature.celsius'=33celsius;0:30;;; 'hardware.sensor.count'=2;;;;
Checking sensors
board sensor 'SLOT #0: TEMP #1' status is 'ok' [instance = 16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.1]
board sensor 'SLOT #0: TEMP #2' status is 'ok' [instance = 16.0.80.235.26.62.131.37.0.0.0.0.0.0.0.0.2]
Checking switch

Brocade 5480 Embedded Blade Switch 2

perl centreon_plugins.pl --plugin=network::brocade::snmp::plugin --hostname=localhost --snmp-version=2c --snmp-community=XXXX --snmp-port=XXXX --mode=hardware --warning='temperature,.*,30' --verbose

OK: All 2 components are ok [2/2 sensors]. | 'SLOT #0: TEMP #1#hardware.sensor.board.temperature.celsius'=25celsius;0:30;;; 'SLOT #0: TEMP #2#hardware.sensor.board.temperature.celsius'=26celsius;0:30;;; 'hardware.sensor.count'=2;;;;
Checking sensors
board sensor 'SLOT #0: TEMP #1' status is 'ok' [instance = 16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.1]
board sensor 'SLOT #0: TEMP #2' status is 'ok' [instance = 16.0.80.235.26.65.59.170.0.0.0.0.0.0.0.0.2]
Checking switch

Brocade G620 Switch:

perl centreon_plugins.pl --plugin=network::brocade::snmp::plugin --hostname=localhost --snmp-version=2c --snmp-community=XXXX --snmp-port=XXXX --mode=hardware --verbose --component=sensor --warning='temperature,.*,:30'

WARNING: temperature sensor 'SLOT #0: TEMP #2' is 34 celsius - temperature sensor 'SLOT #0: TEMP #7' is 46 celsius | 'SLOT #0: TEMP #1#hardware.sensor.temperature.celsius'=26celsius;0:30;;; 'SLOT #0: TEMP #2#hardware.sensor.temperature.celsius'=34celsius;0:30;;; 'SLOT #0: TEMP #3#hardware.sensor.temperature.celsius'=30celsius;0:30;;; 'SLOT #0: TEMP #4#hardware.sensor.temperature.celsius'=30celsius;0:30;;; 'SLOT #0: TEMP #5#hardware.sensor.temperature.celsius'=29celsius;0:30;;; 'SLOT #0: TEMP #6#hardware.sensor.temperature.celsius'=25celsius;0:30;;; 'SLOT #0: TEMP #7#hardware.sensor.temperature.celsius'=46celsius;0:30;;; 'FAN #1#hardware.sensor.fan.rpm'=7767rpm;;;; 'FAN #2#hardware.sensor.fan.rpm'=8141rpm;;;; 'hardware.sensor.count'=11;;;;
Checking sensors
temperature sensor 'SLOT #0: TEMP #1' status is 'nominal' [instance = 1]
temperature sensor 'SLOT #0: TEMP #2' status is 'nominal' [instance = 2]
temperature sensor 'SLOT #0: TEMP #3' status is 'nominal' [instance = 3]
temperature sensor 'SLOT #0: TEMP #4' status is 'nominal' [instance = 4]
temperature sensor 'SLOT #0: TEMP #5' status is 'nominal' [instance = 5]
temperature sensor 'SLOT #0: TEMP #6' status is 'nominal' [instance = 6]
temperature sensor 'SLOT #0: TEMP #7' status is 'nominal' [instance = 7]
fan sensor 'FAN #1' status is 'nominal' [instance = 8]
fan sensor 'FAN #2' status is 'nominal' [instance = 9]
power-supply sensor 'Power Supply #1' status is 'nominal' [instance = 10]
power-supply sensor 'Power Supply #2' status is 'nominal' [instance = 11]

The information available in the OIDs was not exactly the same, so there is a slight difference in output, but this should meet your temperature monitoring needs for Brocade 5480 sensors. Here is the branch for testing. Internally, it will need to be reviewed and approved by the development team (in addition to the addition of automated tests) before being included in a release.

Kind regards.

[Aleksey-Maksimov]

Hello.

Thanks, I just tested CTOR-2080-plugin-network-brocade-snmp-mode-hardware-handle-5480-switches
For the Brocade 5480 Embedded Blade Switch (HP AJ821B), temperature sensor values ​​are now visible:

$ '/usr/lib/nagios/plugins/centreon-plugins-test/centreon-plugins/src/centreon_plugins.pl' 
'--plugin=network::brocade::snmp::plugin' '--mode=hardware' 
'--authpassphrase' 'x' '--authprotocol' 'SHA' '--privpassphrase' 'x' '--privprotocol' 'DES' '--snmp-username' 'x'
'--change-perfdata' '.*,,eval(%(label) =~ s/#hardware//g)' 
'--filter-perfdata-adv' 'not (%(label) =~ /\.count/)' 
'--filter-uom' 'null' '--hostname' 'SW42'  '--snmp-version' '3' 
'--use-new-perfdata' 
'--warning' 'temperature,.*,60' 
'--warning' 'fan,.*,3000:9000'

OK: All 2 components are ok [2/2 sensors]. | 
'SLOT #0: TEMP #1.sensor.board.temperature.celsius'=25;0:60;;; 
'SLOT #0: TEMP #2.sensor.board.temperature.celsius'=31;0:60;;;

But a problem has arisen with the model (Brocade G620), which previously worked but now produces unnecessary messages and duplicate information:

$ '/usr/lib/nagios/plugins/centreon-plugins-test/centreon-plugins/src/centreon_plugins.pl' 
'--plugin=network::brocade::snmp::plugin' '--mode=hardware' 
'--authpassphrase' 'x' '--authprotocol' 'MD5' '--change-perfdata' '.*,,eval(%(label) =~ s/#hardware//g)' 
'--filter-perfdata-adv' 'not (%(label) =~ /\.count/)' 
'--filter-uom' 'null' '--hostname' '10.1.2.22' 
'--privpassphrase' 'x' '--privprotocol' 'DES' 
'--snmp-username' 'x' '--snmp-version' '3' 
'--use-new-perfdata' 
'--warning' 'temperature,.*,60' 
'--warning' 'fan,.*,3000:9000'

Use of uninitialized value in concatenation (.) or string at /usr/lib/nagios/plugins/centreon-plugins-test/centreon-plugins/src/network/brocade/snmp/mode/components/sensor.pm line 213.
Use of uninitialized value in concatenation (.) or string at /usr/lib/nagios/plugins/centreon-plugins-test/centreon-plugins/src/network/brocade/snmp/mode/components/sensor.pm line 213.
Use of uninitialized value in concatenation (.) or string at /usr/lib/nagios/plugins/centreon-plugins-test/centreon-plugins/src/network/brocade/snmp/mode/components/sensor.pm line 213.
Use of uninitialized value in concatenation (.) or string at /usr/lib/nagios/plugins/centreon-plugins-test/centreon-plugins/src/network/brocade/snmp/mode/components/sensor.pm line 213.
OK: All 23 components are ok [22/22 sensors, 1/1 switch]. | 
'SLOT #0: TEMP #1.sensor.temperature.celsius'=26;0:60;;; 
'SLOT #0: TEMP #2.sensor.temperature.celsius'=35;0:60;;; 
'SLOT #0: TEMP #3.sensor.temperature.celsius'=31;0:60;;; 
'SLOT #0: TEMP #4.sensor.temperature.celsius'=31;0:60;;; 
'SLOT #0: TEMP #5.sensor.temperature.celsius'=29;0:60;;; 
'SLOT #0: TEMP #6.sensor.temperature.celsius'=26;0:60;;; 
'SLOT #0: TEMP #7.sensor.temperature.celsius'=46;0:60;;; 
'FAN #1.sensor.fan.rpm'=7949;3000:9000;;; 
'FAN #2.sensor.fan.rpm'=7949;3000:9000;;; 
'SLOT #0: TEMP #1.sensor.board.temperature.celsius'=26;0:60;;; 
'SLOT #0: TEMP #2.sensor.board.temperature.celsius'=35;0:60;;; 
'SLOT #0: TEMP #3.sensor.board.temperature.celsius'=31;0:60;;; 
'SLOT #0: TEMP #4.sensor.board.temperature.celsius'=31;0:60;;; 
'SLOT #0: TEMP #5.sensor.board.temperature.celsius'=29;0:60;;; 
'SLOT #0: TEMP #6.sensor.board.temperature.celsius'=26;0:60;;; 
'SLOT #0: TEMP #7.sensor.board.temperature.celsius'=46;0:60;;; 
'FAN #1.sensor.fan.airflow.'=7949;;;; 
'FAN #2.sensor.fan.airflow.'=7949;;;; 
'Power Supply #1.sensor.power-supply.power.'=1;;;; 
'Power Supply #2.sensor.power-supply.power.'=1;;;;

In this last output, everything looks like this:

• the *.sensor.board.temperature.celsius data duplicates the *.sensor.temperature.celsius data
• the *.sensor.fan.airflow. data duplicates the *.sensor.fan.rpm data.
  Furthermore, the *.sensor.fan.airflow. data does not contain thresholds (3000:9000)

[lucie-tirand]

Hello :)

I didn't have this problem with the data extract you provided me, but indeed it is not desirable. I will be away for a while, so I will not be able to follow up on this topic for the moment.