From 2faf8fa5f4b9817729a0ea9cff1a3808d615be09 Mon Sep 17 00:00:00 2001 From: Anatolii Bazko Date: Thu, 5 Feb 2026 09:17:47 +0100 Subject: [PATCH 1/3] chore: initContainers field Signed-off-by: Anatolii Bazko --- api/v2/checluster_types.go | 4 + api/v2/zz_generated.deepcopy.go | 7 + .../che-operator.clusterserviceversion.yaml | 6 +- .../org.eclipse.che_checlusters.yaml | 1533 +++++++++++++++++ .../bases/org.eclipse.che_checlusters.yaml | 1532 ++++++++++++++++ deploy/deployment/kubernetes/combined.yaml | 1532 ++++++++++++++++ ....eclipse.che.CustomResourceDefinition.yaml | 1532 ++++++++++++++++ deploy/deployment/openshift/combined.yaml | 1532 ++++++++++++++++ ....eclipse.che.CustomResourceDefinition.yaml | 1532 ++++++++++++++++ go.mod | 2 +- go.sum | 4 +- ....eclipse.che.CustomResourceDefinition.yaml | 1532 ++++++++++++++++ .../dev_workspace_config.go | 6 + .../devworkspaceoperatorconfig_types.go | 3 + .../v1alpha1/zz_generated.deepcopy.go | 7 + .../devworkspace-operator/pkg/config/sync.go | 15 + .../pkg/constants/constants.go | 2 + vendor/modules.txt | 2 +- 18 files changed, 10776 insertions(+), 7 deletions(-) diff --git a/api/v2/checluster_types.go b/api/v2/checluster_types.go index 0f2cc4d63..ecdd5cc82 100644 --- a/api/v2/checluster_types.go +++ b/api/v2/checluster_types.go @@ -247,6 +247,10 @@ type CheClusterDevEnvironments struct { // Configuration settings related to the workspaces networking. // +optional Networking *DevEnvironmentNetworking `json:"networking,omitempty"` + // InitContainers defines a list of Kubernetes init containers that are automatically injected into all workspace pods. + // Typical uses cases include injecting organization tools/configs, initializing persistent home, etc. + // +optional + InitContainers []corev1.Container `json:"initContainers,omitempty"` } // Che components configuration. diff --git a/api/v2/zz_generated.deepcopy.go b/api/v2/zz_generated.deepcopy.go index 57a01f340..111b0d42d 100644 --- a/api/v2/zz_generated.deepcopy.go +++ b/api/v2/zz_generated.deepcopy.go @@ -394,6 +394,13 @@ func (in *CheClusterDevEnvironments) DeepCopyInto(out *CheClusterDevEnvironments *out = new(DevEnvironmentNetworking) (*in).DeepCopyInto(*out) } + if in.InitContainers != nil { + in, out := &in.InitContainers, &out.InitContainers + *out = make([]v1.Container, len(*in)) + for i := range *in { + (*in)[i].DeepCopyInto(&(*out)[i]) + } + } } // DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new CheClusterDevEnvironments. diff --git a/bundle/next/eclipse-che/manifests/che-operator.clusterserviceversion.yaml b/bundle/next/eclipse-che/manifests/che-operator.clusterserviceversion.yaml index 5bcc9278f..58d0c96de 100644 --- a/bundle/next/eclipse-che/manifests/che-operator.clusterserviceversion.yaml +++ b/bundle/next/eclipse-che/manifests/che-operator.clusterserviceversion.yaml @@ -86,7 +86,7 @@ metadata: categories: Developer Tools certified: "false" containerImage: quay.io/eclipse/che-operator:next - createdAt: "2026-01-16T09:21:06Z" + createdAt: "2026-02-05T08:15:41Z" description: A Kube-native development solution that delivers portable and collaborative developer workspaces. features.operators.openshift.io/cnf: "false" @@ -108,7 +108,7 @@ metadata: operatorframework.io/arch.amd64: supported operatorframework.io/arch.arm64: supported operatorframework.io/os.linux: supported - name: eclipse-che.v7.114.0-951.next + name: eclipse-che.v7.115.0-952.next namespace: placeholder spec: apiservicedefinitions: {} @@ -1141,7 +1141,7 @@ spec: name: gateway-authorization-sidecar-k8s - image: quay.io/che-incubator/header-rewrite-proxy:latest name: gateway-header-sidecar - version: 7.114.0-951.next + version: 7.115.0-952.next webhookdefinitions: - admissionReviewVersions: - v1 diff --git a/bundle/next/eclipse-che/manifests/org.eclipse.che_checlusters.yaml b/bundle/next/eclipse-che/manifests/org.eclipse.che_checlusters.yaml index 1f4d975c8..f44a38f8d 100644 --- a/bundle/next/eclipse-che/manifests/org.eclipse.che_checlusters.yaml +++ b/bundle/next/eclipse-che/manifests/org.eclipse.che_checlusters.yaml @@ -8040,6 +8040,1539 @@ spec: - IfNotPresent - Never type: string + initContainers: + description: |- + InitContainers defines a list of Kubernetes init containers that are automatically injected into all workspace pods. + Typical uses cases include injecting organization tools/configs, initializing persistent home, etc. + items: + description: A single application container that you want + to run within a pod. + properties: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + command: + description: |- + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment variable + present in a Container. + properties: + name: + description: |- + Name of the environment variable. + May consist of any printable ASCII characters except '='. + type: string + value: + description: |- + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. + properties: + key: + description: The key to select. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + fieldRef: + description: |- + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. + properties: + apiVersion: + description: Version of the schema the FieldPath + is written in terms of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to select + in the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + fileKeyRef: + description: |- + FileKeyRef selects a key of the env file. + Requires the EnvFiles feature gate to be enabled. + properties: + key: + description: |- + The key within the env file. An invalid key will prevent the pod from starting. + The keys defined within a source may consist of any printable ASCII characters except '='. + During Alpha stage of the EnvFiles feature gate, the key size is limited to 128 characters. + type: string + optional: + default: false + description: |- + Specify whether the file or its key must be defined. If the file or key + does not exist, then the env var is not published. + If optional is set to true and the specified key does not exist, + the environment variable will not be set in the Pod's containers. + + If optional is set to false and the specified key does not exist, + an error will be returned during Pod creation. + type: boolean + path: + description: |- + The path within the volume from which to select the file. + Must be relative and may not contain the '..' path or start with '..'. + type: string + volumeName: + description: The name of the volume mount + containing the env file. + type: string + required: + - key + - path + - volumeName + type: object + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. + properties: + containerName: + description: 'Container name: required for + volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output format + of the exposed resources, defaults to + "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret in the + pod's namespace + properties: + key: + description: The key of the secret to select + from. Must be a valid secret key. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + type: object + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source may consist of any printable ASCII characters except '='. + When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source of + a set of ConfigMaps or Secrets + properties: + configMapRef: + description: The ConfigMap to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap must + be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + prefix: + description: |- + Optional text to prepend to the name of each environment variable. + May consist of any printable ASCII characters except '='. + type: string + secretRef: + description: The Secret to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret must + be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object + type: array + x-kubernetes-list-type: atomic + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that + the container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that + the container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + stopSignal: + description: |- + StopSignal defines which signal will be sent to a container when it is being stopped. + If not specified, the default is defined by the container runtime in use. + StopSignal can only be set for Pods with a non-empty .spec.os.name + type: string + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a + TCP port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network port + in a single container. + properties: + containerPort: + description: |- + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external port + to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a + TCP port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents resource + resize policy for the container. + properties: + resourceName: + description: |- + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: + description: |- + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. + + This field depends on the + DynamicResourceAllocation feature gate. + + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one entry + in PodSpec.ResourceClaims. + properties: + name: + description: |- + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. + type: string + request: + description: |- + Request is the name chosen for a request in the referenced claim. + If empty, everything from the claim is made available, otherwise + only the result of this request. + type: string + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This overrides the pod-level restart policy. When this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Additionally, setting the RestartPolicy as "Always" for the init container will + have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + restartPolicyRules: + description: |- + Represents a list of rules to be checked to determine if the + container should be restarted on exit. The rules are evaluated in + order. Once a rule matches a container exit condition, the remaining + rules are ignored. If no rule matches the container exit condition, + the Container-level restart policy determines the whether the container + is restarted or not. Constraints on the rules: + - At most 20 rules are allowed. + - Rules can have the same action. + - Identical rules are not forbidden in validations. + When rules are specified, container MUST set RestartPolicy explicitly + even it if matches the Pod's RestartPolicy. + items: + description: ContainerRestartRule describes how a container + exit is handled. + properties: + action: + description: |- + Specifies the action taken on a container exit if the requirements + are satisfied. The only possible value is "Restart" to restart the + container. + type: string + exitCodes: + description: Represents the exit codes to check + on container exits. + properties: + operator: + description: |- + Represents the relationship between the container exit code(s) and the + specified values. Possible values are: + - In: the requirement is satisfied if the container exit code is in the + set of specified values. + - NotIn: the requirement is satisfied if the container exit code is + not in the set of specified values. + type: string + values: + description: |- + Specifies the set of values to check for container exit codes. + At most 255 elements are allowed. + items: + format: int32 + type: integer + type: array + x-kubernetes-list-type: set + required: + - operator + type: object + required: + - action + type: object + type: array + x-kubernetes-list-type: atomic + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + appArmorProfile: + description: |- + appArmorProfile is the AppArmor options to use by this container. If set, this profile + overrides the pod's appArmorProfile. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile loaded on the node that should be used. + The profile must be preconfigured on the node to work. + Must match the loaded name of the profile. + Must be set if and only if type is "Localhost". + type: string + type: + description: |- + type indicates which kind of AppArmor profile will be applied. + Valid options are: + Localhost - a profile pre-loaded on the node. + RuntimeDefault - the container runtime's default profile. + Unconfined - no AppArmor enforcement. + type: string + required: + - type + type: object + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + drop: + description: Removed capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default value is Default which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label that + applies to the container. + type: string + role: + description: Role is a SELinux role label that + applies to the container. + type: string + type: + description: Type is a SELinux type label that + applies to the container. + type: string + user: + description: User is a SELinux user label that + applies to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. + type: string + type: + description: |- + type indicates which kind of seccomp profile will be applied. + Valid options are: + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. + type: string + required: + - type + type: object + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the name + of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: string + type: object + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a + TCP port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block devices + to be used by the container. + items: + description: volumeDevice describes a mapping of a raw + block device within a container. + properties: + devicePath: + description: devicePath is the path inside of the + container that the device will be mapped to. + type: string + name: + description: name must match the name of a persistentVolumeClaim + in the pod + type: string + required: + - devicePath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - devicePath + x-kubernetes-list-type: map + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. + Cannot be updated. + items: + description: VolumeMount describes a mounting of a Volume + within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified + (which defaults to None). + type: string + name: + description: This must match the Name of a Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + recursiveReadOnly: + description: |- + RecursiveReadOnly specifies whether read-only mounts should be handled + recursively. + + If ReadOnly is false, this field has no meaning and must be unspecified. + + If ReadOnly is true, and this field is set to Disabled, the mount is not made + recursively read-only. If this field is set to IfPossible, the mount is made + recursively read-only, if it is supported by the container runtime. If this + field is set to Enabled, the mount is made recursively read-only if it is + supported by the container runtime, otherwise the pod will not be started and + an error will be generated to indicate the reason. + + If this field is set to IfPossible or Enabled, MountPropagation must be set to + None (or be unspecified, which defaults to None). + + If this field is not specified, it is treated as an equivalent of Disabled. + type: string + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - mountPath + x-kubernetes-list-type: map + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array maxNumberOfRunningWorkspacesPerCluster: description: |- The maximum number of concurrently running workspaces across the entire Kubernetes cluster. diff --git a/config/crd/bases/org.eclipse.che_checlusters.yaml b/config/crd/bases/org.eclipse.che_checlusters.yaml index a2a1c55ec..42612a544 100644 --- a/config/crd/bases/org.eclipse.che_checlusters.yaml +++ b/config/crd/bases/org.eclipse.che_checlusters.yaml @@ -7993,6 +7993,1538 @@ spec: - IfNotPresent - Never type: string + initContainers: + description: |- + InitContainers defines a list of Kubernetes init containers that are automatically injected into all workspace pods. + Typical uses cases include injecting organization tools/configs, initializing persistent home, etc. + items: + description: A single application container that you want to + run within a pod. + properties: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + command: + description: |- + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment variable + present in a Container. + properties: + name: + description: |- + Name of the environment variable. + May consist of any printable ASCII characters except '='. + type: string + value: + description: |- + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. + properties: + key: + description: The key to select. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + fieldRef: + description: |- + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. + properties: + apiVersion: + description: Version of the schema the FieldPath + is written in terms of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to select in + the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + fileKeyRef: + description: |- + FileKeyRef selects a key of the env file. + Requires the EnvFiles feature gate to be enabled. + properties: + key: + description: |- + The key within the env file. An invalid key will prevent the pod from starting. + The keys defined within a source may consist of any printable ASCII characters except '='. + During Alpha stage of the EnvFiles feature gate, the key size is limited to 128 characters. + type: string + optional: + default: false + description: |- + Specify whether the file or its key must be defined. If the file or key + does not exist, then the env var is not published. + If optional is set to true and the specified key does not exist, + the environment variable will not be set in the Pod's containers. + + If optional is set to false and the specified key does not exist, + an error will be returned during Pod creation. + type: boolean + path: + description: |- + The path within the volume from which to select the file. + Must be relative and may not contain the '..' path or start with '..'. + type: string + volumeName: + description: The name of the volume mount + containing the env file. + type: string + required: + - key + - path + - volumeName + type: object + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. + properties: + containerName: + description: 'Container name: required for + volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output format of + the exposed resources, defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret in the + pod's namespace + properties: + key: + description: The key of the secret to select + from. Must be a valid secret key. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret or + its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + type: object + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source may consist of any printable ASCII characters except '='. + When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source of a + set of ConfigMaps or Secrets + properties: + configMapRef: + description: The ConfigMap to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap must + be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + prefix: + description: |- + Optional text to prepend to the name of each environment variable. + May consist of any printable ASCII characters except '='. + type: string + secretRef: + description: The Secret to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret must be + defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object + type: array + x-kubernetes-list-type: atomic + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + stopSignal: + description: |- + StopSignal defines which signal will be sent to a container when it is being stopped. + If not specified, the default is defined by the container runtime in use. + StopSignal can only be set for Pods with a non-empty .spec.os.name + type: string + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network port in + a single container. + properties: + containerPort: + description: |- + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external port + to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents resource + resize policy for the container. + properties: + resourceName: + description: |- + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: + description: |- + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. + + This field depends on the + DynamicResourceAllocation feature gate. + + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one entry in + PodSpec.ResourceClaims. + properties: + name: + description: |- + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. + type: string + request: + description: |- + Request is the name chosen for a request in the referenced claim. + If empty, everything from the claim is made available, otherwise + only the result of this request. + type: string + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This overrides the pod-level restart policy. When this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Additionally, setting the RestartPolicy as "Always" for the init container will + have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + restartPolicyRules: + description: |- + Represents a list of rules to be checked to determine if the + container should be restarted on exit. The rules are evaluated in + order. Once a rule matches a container exit condition, the remaining + rules are ignored. If no rule matches the container exit condition, + the Container-level restart policy determines the whether the container + is restarted or not. Constraints on the rules: + - At most 20 rules are allowed. + - Rules can have the same action. + - Identical rules are not forbidden in validations. + When rules are specified, container MUST set RestartPolicy explicitly + even it if matches the Pod's RestartPolicy. + items: + description: ContainerRestartRule describes how a container + exit is handled. + properties: + action: + description: |- + Specifies the action taken on a container exit if the requirements + are satisfied. The only possible value is "Restart" to restart the + container. + type: string + exitCodes: + description: Represents the exit codes to check on + container exits. + properties: + operator: + description: |- + Represents the relationship between the container exit code(s) and the + specified values. Possible values are: + - In: the requirement is satisfied if the container exit code is in the + set of specified values. + - NotIn: the requirement is satisfied if the container exit code is + not in the set of specified values. + type: string + values: + description: |- + Specifies the set of values to check for container exit codes. + At most 255 elements are allowed. + items: + format: int32 + type: integer + type: array + x-kubernetes-list-type: set + required: + - operator + type: object + required: + - action + type: object + type: array + x-kubernetes-list-type: atomic + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + appArmorProfile: + description: |- + appArmorProfile is the AppArmor options to use by this container. If set, this profile + overrides the pod's appArmorProfile. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile loaded on the node that should be used. + The profile must be preconfigured on the node to work. + Must match the loaded name of the profile. + Must be set if and only if type is "Localhost". + type: string + type: + description: |- + type indicates which kind of AppArmor profile will be applied. + Valid options are: + Localhost - a profile pre-loaded on the node. + RuntimeDefault - the container runtime's default profile. + Unconfined - no AppArmor enforcement. + type: string + required: + - type + type: object + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + drop: + description: Removed capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default value is Default which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label that applies + to the container. + type: string + role: + description: Role is a SELinux role label that applies + to the container. + type: string + type: + description: Type is a SELinux type label that applies + to the container. + type: string + user: + description: User is a SELinux user label that applies + to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. + type: string + type: + description: |- + type indicates which kind of seccomp profile will be applied. + Valid options are: + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. + type: string + required: + - type + type: object + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the name + of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: string + type: object + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block devices + to be used by the container. + items: + description: volumeDevice describes a mapping of a raw + block device within a container. + properties: + devicePath: + description: devicePath is the path inside of the + container that the device will be mapped to. + type: string + name: + description: name must match the name of a persistentVolumeClaim + in the pod + type: string + required: + - devicePath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - devicePath + x-kubernetes-list-type: map + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. + Cannot be updated. + items: + description: VolumeMount describes a mounting of a Volume + within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified + (which defaults to None). + type: string + name: + description: This must match the Name of a Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + recursiveReadOnly: + description: |- + RecursiveReadOnly specifies whether read-only mounts should be handled + recursively. + + If ReadOnly is false, this field has no meaning and must be unspecified. + + If ReadOnly is true, and this field is set to Disabled, the mount is not made + recursively read-only. If this field is set to IfPossible, the mount is made + recursively read-only, if it is supported by the container runtime. If this + field is set to Enabled, the mount is made recursively read-only if it is + supported by the container runtime, otherwise the pod will not be started and + an error will be generated to indicate the reason. + + If this field is set to IfPossible or Enabled, MountPropagation must be set to + None (or be unspecified, which defaults to None). + + If this field is not specified, it is treated as an equivalent of Disabled. + type: string + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - mountPath + x-kubernetes-list-type: map + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array maxNumberOfRunningWorkspacesPerCluster: description: |- The maximum number of concurrently running workspaces across the entire Kubernetes cluster. diff --git a/deploy/deployment/kubernetes/combined.yaml b/deploy/deployment/kubernetes/combined.yaml index 4aeeb2134..3b070b5ee 100644 --- a/deploy/deployment/kubernetes/combined.yaml +++ b/deploy/deployment/kubernetes/combined.yaml @@ -8014,6 +8014,1538 @@ spec: - IfNotPresent - Never type: string + initContainers: + description: |- + InitContainers defines a list of Kubernetes init containers that are automatically injected into all workspace pods. + Typical uses cases include injecting organization tools/configs, initializing persistent home, etc. + items: + description: A single application container that you want to + run within a pod. + properties: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + command: + description: |- + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment variable + present in a Container. + properties: + name: + description: |- + Name of the environment variable. + May consist of any printable ASCII characters except '='. + type: string + value: + description: |- + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. + properties: + key: + description: The key to select. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + fieldRef: + description: |- + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. + properties: + apiVersion: + description: Version of the schema the FieldPath + is written in terms of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to select in + the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + fileKeyRef: + description: |- + FileKeyRef selects a key of the env file. + Requires the EnvFiles feature gate to be enabled. + properties: + key: + description: |- + The key within the env file. An invalid key will prevent the pod from starting. + The keys defined within a source may consist of any printable ASCII characters except '='. + During Alpha stage of the EnvFiles feature gate, the key size is limited to 128 characters. + type: string + optional: + default: false + description: |- + Specify whether the file or its key must be defined. If the file or key + does not exist, then the env var is not published. + If optional is set to true and the specified key does not exist, + the environment variable will not be set in the Pod's containers. + + If optional is set to false and the specified key does not exist, + an error will be returned during Pod creation. + type: boolean + path: + description: |- + The path within the volume from which to select the file. + Must be relative and may not contain the '..' path or start with '..'. + type: string + volumeName: + description: The name of the volume mount + containing the env file. + type: string + required: + - key + - path + - volumeName + type: object + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. + properties: + containerName: + description: 'Container name: required for + volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output format of + the exposed resources, defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret in the + pod's namespace + properties: + key: + description: The key of the secret to select + from. Must be a valid secret key. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret or + its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + type: object + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source may consist of any printable ASCII characters except '='. + When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source of a + set of ConfigMaps or Secrets + properties: + configMapRef: + description: The ConfigMap to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap must + be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + prefix: + description: |- + Optional text to prepend to the name of each environment variable. + May consist of any printable ASCII characters except '='. + type: string + secretRef: + description: The Secret to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret must be + defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object + type: array + x-kubernetes-list-type: atomic + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + stopSignal: + description: |- + StopSignal defines which signal will be sent to a container when it is being stopped. + If not specified, the default is defined by the container runtime in use. + StopSignal can only be set for Pods with a non-empty .spec.os.name + type: string + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network port in + a single container. + properties: + containerPort: + description: |- + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external port + to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents resource + resize policy for the container. + properties: + resourceName: + description: |- + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: + description: |- + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. + + This field depends on the + DynamicResourceAllocation feature gate. + + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one entry in + PodSpec.ResourceClaims. + properties: + name: + description: |- + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. + type: string + request: + description: |- + Request is the name chosen for a request in the referenced claim. + If empty, everything from the claim is made available, otherwise + only the result of this request. + type: string + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This overrides the pod-level restart policy. When this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Additionally, setting the RestartPolicy as "Always" for the init container will + have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + restartPolicyRules: + description: |- + Represents a list of rules to be checked to determine if the + container should be restarted on exit. The rules are evaluated in + order. Once a rule matches a container exit condition, the remaining + rules are ignored. If no rule matches the container exit condition, + the Container-level restart policy determines the whether the container + is restarted or not. Constraints on the rules: + - At most 20 rules are allowed. + - Rules can have the same action. + - Identical rules are not forbidden in validations. + When rules are specified, container MUST set RestartPolicy explicitly + even it if matches the Pod's RestartPolicy. + items: + description: ContainerRestartRule describes how a container + exit is handled. + properties: + action: + description: |- + Specifies the action taken on a container exit if the requirements + are satisfied. The only possible value is "Restart" to restart the + container. + type: string + exitCodes: + description: Represents the exit codes to check on + container exits. + properties: + operator: + description: |- + Represents the relationship between the container exit code(s) and the + specified values. Possible values are: + - In: the requirement is satisfied if the container exit code is in the + set of specified values. + - NotIn: the requirement is satisfied if the container exit code is + not in the set of specified values. + type: string + values: + description: |- + Specifies the set of values to check for container exit codes. + At most 255 elements are allowed. + items: + format: int32 + type: integer + type: array + x-kubernetes-list-type: set + required: + - operator + type: object + required: + - action + type: object + type: array + x-kubernetes-list-type: atomic + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + appArmorProfile: + description: |- + appArmorProfile is the AppArmor options to use by this container. If set, this profile + overrides the pod's appArmorProfile. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile loaded on the node that should be used. + The profile must be preconfigured on the node to work. + Must match the loaded name of the profile. + Must be set if and only if type is "Localhost". + type: string + type: + description: |- + type indicates which kind of AppArmor profile will be applied. + Valid options are: + Localhost - a profile pre-loaded on the node. + RuntimeDefault - the container runtime's default profile. + Unconfined - no AppArmor enforcement. + type: string + required: + - type + type: object + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + drop: + description: Removed capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default value is Default which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label that applies + to the container. + type: string + role: + description: Role is a SELinux role label that applies + to the container. + type: string + type: + description: Type is a SELinux type label that applies + to the container. + type: string + user: + description: User is a SELinux user label that applies + to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. + type: string + type: + description: |- + type indicates which kind of seccomp profile will be applied. + Valid options are: + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. + type: string + required: + - type + type: object + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the name + of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: string + type: object + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block devices + to be used by the container. + items: + description: volumeDevice describes a mapping of a raw + block device within a container. + properties: + devicePath: + description: devicePath is the path inside of the + container that the device will be mapped to. + type: string + name: + description: name must match the name of a persistentVolumeClaim + in the pod + type: string + required: + - devicePath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - devicePath + x-kubernetes-list-type: map + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. + Cannot be updated. + items: + description: VolumeMount describes a mounting of a Volume + within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified + (which defaults to None). + type: string + name: + description: This must match the Name of a Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + recursiveReadOnly: + description: |- + RecursiveReadOnly specifies whether read-only mounts should be handled + recursively. + + If ReadOnly is false, this field has no meaning and must be unspecified. + + If ReadOnly is true, and this field is set to Disabled, the mount is not made + recursively read-only. If this field is set to IfPossible, the mount is made + recursively read-only, if it is supported by the container runtime. If this + field is set to Enabled, the mount is made recursively read-only if it is + supported by the container runtime, otherwise the pod will not be started and + an error will be generated to indicate the reason. + + If this field is set to IfPossible or Enabled, MountPropagation must be set to + None (or be unspecified, which defaults to None). + + If this field is not specified, it is treated as an equivalent of Disabled. + type: string + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - mountPath + x-kubernetes-list-type: map + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array maxNumberOfRunningWorkspacesPerCluster: description: |- The maximum number of concurrently running workspaces across the entire Kubernetes cluster. diff --git a/deploy/deployment/kubernetes/objects/checlusters.org.eclipse.che.CustomResourceDefinition.yaml b/deploy/deployment/kubernetes/objects/checlusters.org.eclipse.che.CustomResourceDefinition.yaml index c61793a64..102fdcb6b 100644 --- a/deploy/deployment/kubernetes/objects/checlusters.org.eclipse.che.CustomResourceDefinition.yaml +++ b/deploy/deployment/kubernetes/objects/checlusters.org.eclipse.che.CustomResourceDefinition.yaml @@ -8009,6 +8009,1538 @@ spec: - IfNotPresent - Never type: string + initContainers: + description: |- + InitContainers defines a list of Kubernetes init containers that are automatically injected into all workspace pods. + Typical uses cases include injecting organization tools/configs, initializing persistent home, etc. + items: + description: A single application container that you want to + run within a pod. + properties: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + command: + description: |- + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment variable + present in a Container. + properties: + name: + description: |- + Name of the environment variable. + May consist of any printable ASCII characters except '='. + type: string + value: + description: |- + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. + properties: + key: + description: The key to select. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + fieldRef: + description: |- + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. + properties: + apiVersion: + description: Version of the schema the FieldPath + is written in terms of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to select in + the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + fileKeyRef: + description: |- + FileKeyRef selects a key of the env file. + Requires the EnvFiles feature gate to be enabled. + properties: + key: + description: |- + The key within the env file. An invalid key will prevent the pod from starting. + The keys defined within a source may consist of any printable ASCII characters except '='. + During Alpha stage of the EnvFiles feature gate, the key size is limited to 128 characters. + type: string + optional: + default: false + description: |- + Specify whether the file or its key must be defined. If the file or key + does not exist, then the env var is not published. + If optional is set to true and the specified key does not exist, + the environment variable will not be set in the Pod's containers. + + If optional is set to false and the specified key does not exist, + an error will be returned during Pod creation. + type: boolean + path: + description: |- + The path within the volume from which to select the file. + Must be relative and may not contain the '..' path or start with '..'. + type: string + volumeName: + description: The name of the volume mount + containing the env file. + type: string + required: + - key + - path + - volumeName + type: object + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. + properties: + containerName: + description: 'Container name: required for + volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output format of + the exposed resources, defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret in the + pod's namespace + properties: + key: + description: The key of the secret to select + from. Must be a valid secret key. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret or + its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + type: object + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source may consist of any printable ASCII characters except '='. + When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source of a + set of ConfigMaps or Secrets + properties: + configMapRef: + description: The ConfigMap to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap must + be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + prefix: + description: |- + Optional text to prepend to the name of each environment variable. + May consist of any printable ASCII characters except '='. + type: string + secretRef: + description: The Secret to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret must be + defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object + type: array + x-kubernetes-list-type: atomic + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + stopSignal: + description: |- + StopSignal defines which signal will be sent to a container when it is being stopped. + If not specified, the default is defined by the container runtime in use. + StopSignal can only be set for Pods with a non-empty .spec.os.name + type: string + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network port in + a single container. + properties: + containerPort: + description: |- + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external port + to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents resource + resize policy for the container. + properties: + resourceName: + description: |- + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: + description: |- + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. + + This field depends on the + DynamicResourceAllocation feature gate. + + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one entry in + PodSpec.ResourceClaims. + properties: + name: + description: |- + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. + type: string + request: + description: |- + Request is the name chosen for a request in the referenced claim. + If empty, everything from the claim is made available, otherwise + only the result of this request. + type: string + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This overrides the pod-level restart policy. When this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Additionally, setting the RestartPolicy as "Always" for the init container will + have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + restartPolicyRules: + description: |- + Represents a list of rules to be checked to determine if the + container should be restarted on exit. The rules are evaluated in + order. Once a rule matches a container exit condition, the remaining + rules are ignored. If no rule matches the container exit condition, + the Container-level restart policy determines the whether the container + is restarted or not. Constraints on the rules: + - At most 20 rules are allowed. + - Rules can have the same action. + - Identical rules are not forbidden in validations. + When rules are specified, container MUST set RestartPolicy explicitly + even it if matches the Pod's RestartPolicy. + items: + description: ContainerRestartRule describes how a container + exit is handled. + properties: + action: + description: |- + Specifies the action taken on a container exit if the requirements + are satisfied. The only possible value is "Restart" to restart the + container. + type: string + exitCodes: + description: Represents the exit codes to check on + container exits. + properties: + operator: + description: |- + Represents the relationship between the container exit code(s) and the + specified values. Possible values are: + - In: the requirement is satisfied if the container exit code is in the + set of specified values. + - NotIn: the requirement is satisfied if the container exit code is + not in the set of specified values. + type: string + values: + description: |- + Specifies the set of values to check for container exit codes. + At most 255 elements are allowed. + items: + format: int32 + type: integer + type: array + x-kubernetes-list-type: set + required: + - operator + type: object + required: + - action + type: object + type: array + x-kubernetes-list-type: atomic + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + appArmorProfile: + description: |- + appArmorProfile is the AppArmor options to use by this container. If set, this profile + overrides the pod's appArmorProfile. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile loaded on the node that should be used. + The profile must be preconfigured on the node to work. + Must match the loaded name of the profile. + Must be set if and only if type is "Localhost". + type: string + type: + description: |- + type indicates which kind of AppArmor profile will be applied. + Valid options are: + Localhost - a profile pre-loaded on the node. + RuntimeDefault - the container runtime's default profile. + Unconfined - no AppArmor enforcement. + type: string + required: + - type + type: object + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + drop: + description: Removed capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default value is Default which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label that applies + to the container. + type: string + role: + description: Role is a SELinux role label that applies + to the container. + type: string + type: + description: Type is a SELinux type label that applies + to the container. + type: string + user: + description: User is a SELinux user label that applies + to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. + type: string + type: + description: |- + type indicates which kind of seccomp profile will be applied. + Valid options are: + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. + type: string + required: + - type + type: object + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the name + of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: string + type: object + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block devices + to be used by the container. + items: + description: volumeDevice describes a mapping of a raw + block device within a container. + properties: + devicePath: + description: devicePath is the path inside of the + container that the device will be mapped to. + type: string + name: + description: name must match the name of a persistentVolumeClaim + in the pod + type: string + required: + - devicePath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - devicePath + x-kubernetes-list-type: map + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. + Cannot be updated. + items: + description: VolumeMount describes a mounting of a Volume + within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified + (which defaults to None). + type: string + name: + description: This must match the Name of a Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + recursiveReadOnly: + description: |- + RecursiveReadOnly specifies whether read-only mounts should be handled + recursively. + + If ReadOnly is false, this field has no meaning and must be unspecified. + + If ReadOnly is true, and this field is set to Disabled, the mount is not made + recursively read-only. If this field is set to IfPossible, the mount is made + recursively read-only, if it is supported by the container runtime. If this + field is set to Enabled, the mount is made recursively read-only if it is + supported by the container runtime, otherwise the pod will not be started and + an error will be generated to indicate the reason. + + If this field is set to IfPossible or Enabled, MountPropagation must be set to + None (or be unspecified, which defaults to None). + + If this field is not specified, it is treated as an equivalent of Disabled. + type: string + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - mountPath + x-kubernetes-list-type: map + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array maxNumberOfRunningWorkspacesPerCluster: description: |- The maximum number of concurrently running workspaces across the entire Kubernetes cluster. diff --git a/deploy/deployment/openshift/combined.yaml b/deploy/deployment/openshift/combined.yaml index b2e9262d5..4d1c407af 100644 --- a/deploy/deployment/openshift/combined.yaml +++ b/deploy/deployment/openshift/combined.yaml @@ -8014,6 +8014,1538 @@ spec: - IfNotPresent - Never type: string + initContainers: + description: |- + InitContainers defines a list of Kubernetes init containers that are automatically injected into all workspace pods. + Typical uses cases include injecting organization tools/configs, initializing persistent home, etc. + items: + description: A single application container that you want to + run within a pod. + properties: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + command: + description: |- + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment variable + present in a Container. + properties: + name: + description: |- + Name of the environment variable. + May consist of any printable ASCII characters except '='. + type: string + value: + description: |- + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. + properties: + key: + description: The key to select. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + fieldRef: + description: |- + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. + properties: + apiVersion: + description: Version of the schema the FieldPath + is written in terms of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to select in + the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + fileKeyRef: + description: |- + FileKeyRef selects a key of the env file. + Requires the EnvFiles feature gate to be enabled. + properties: + key: + description: |- + The key within the env file. An invalid key will prevent the pod from starting. + The keys defined within a source may consist of any printable ASCII characters except '='. + During Alpha stage of the EnvFiles feature gate, the key size is limited to 128 characters. + type: string + optional: + default: false + description: |- + Specify whether the file or its key must be defined. If the file or key + does not exist, then the env var is not published. + If optional is set to true and the specified key does not exist, + the environment variable will not be set in the Pod's containers. + + If optional is set to false and the specified key does not exist, + an error will be returned during Pod creation. + type: boolean + path: + description: |- + The path within the volume from which to select the file. + Must be relative and may not contain the '..' path or start with '..'. + type: string + volumeName: + description: The name of the volume mount + containing the env file. + type: string + required: + - key + - path + - volumeName + type: object + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. + properties: + containerName: + description: 'Container name: required for + volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output format of + the exposed resources, defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret in the + pod's namespace + properties: + key: + description: The key of the secret to select + from. Must be a valid secret key. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret or + its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + type: object + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source may consist of any printable ASCII characters except '='. + When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source of a + set of ConfigMaps or Secrets + properties: + configMapRef: + description: The ConfigMap to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap must + be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + prefix: + description: |- + Optional text to prepend to the name of each environment variable. + May consist of any printable ASCII characters except '='. + type: string + secretRef: + description: The Secret to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret must be + defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object + type: array + x-kubernetes-list-type: atomic + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + stopSignal: + description: |- + StopSignal defines which signal will be sent to a container when it is being stopped. + If not specified, the default is defined by the container runtime in use. + StopSignal can only be set for Pods with a non-empty .spec.os.name + type: string + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network port in + a single container. + properties: + containerPort: + description: |- + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external port + to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents resource + resize policy for the container. + properties: + resourceName: + description: |- + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: + description: |- + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. + + This field depends on the + DynamicResourceAllocation feature gate. + + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one entry in + PodSpec.ResourceClaims. + properties: + name: + description: |- + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. + type: string + request: + description: |- + Request is the name chosen for a request in the referenced claim. + If empty, everything from the claim is made available, otherwise + only the result of this request. + type: string + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This overrides the pod-level restart policy. When this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Additionally, setting the RestartPolicy as "Always" for the init container will + have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + restartPolicyRules: + description: |- + Represents a list of rules to be checked to determine if the + container should be restarted on exit. The rules are evaluated in + order. Once a rule matches a container exit condition, the remaining + rules are ignored. If no rule matches the container exit condition, + the Container-level restart policy determines the whether the container + is restarted or not. Constraints on the rules: + - At most 20 rules are allowed. + - Rules can have the same action. + - Identical rules are not forbidden in validations. + When rules are specified, container MUST set RestartPolicy explicitly + even it if matches the Pod's RestartPolicy. + items: + description: ContainerRestartRule describes how a container + exit is handled. + properties: + action: + description: |- + Specifies the action taken on a container exit if the requirements + are satisfied. The only possible value is "Restart" to restart the + container. + type: string + exitCodes: + description: Represents the exit codes to check on + container exits. + properties: + operator: + description: |- + Represents the relationship between the container exit code(s) and the + specified values. Possible values are: + - In: the requirement is satisfied if the container exit code is in the + set of specified values. + - NotIn: the requirement is satisfied if the container exit code is + not in the set of specified values. + type: string + values: + description: |- + Specifies the set of values to check for container exit codes. + At most 255 elements are allowed. + items: + format: int32 + type: integer + type: array + x-kubernetes-list-type: set + required: + - operator + type: object + required: + - action + type: object + type: array + x-kubernetes-list-type: atomic + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + appArmorProfile: + description: |- + appArmorProfile is the AppArmor options to use by this container. If set, this profile + overrides the pod's appArmorProfile. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile loaded on the node that should be used. + The profile must be preconfigured on the node to work. + Must match the loaded name of the profile. + Must be set if and only if type is "Localhost". + type: string + type: + description: |- + type indicates which kind of AppArmor profile will be applied. + Valid options are: + Localhost - a profile pre-loaded on the node. + RuntimeDefault - the container runtime's default profile. + Unconfined - no AppArmor enforcement. + type: string + required: + - type + type: object + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + drop: + description: Removed capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default value is Default which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label that applies + to the container. + type: string + role: + description: Role is a SELinux role label that applies + to the container. + type: string + type: + description: Type is a SELinux type label that applies + to the container. + type: string + user: + description: User is a SELinux user label that applies + to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. + type: string + type: + description: |- + type indicates which kind of seccomp profile will be applied. + Valid options are: + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. + type: string + required: + - type + type: object + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the name + of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: string + type: object + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block devices + to be used by the container. + items: + description: volumeDevice describes a mapping of a raw + block device within a container. + properties: + devicePath: + description: devicePath is the path inside of the + container that the device will be mapped to. + type: string + name: + description: name must match the name of a persistentVolumeClaim + in the pod + type: string + required: + - devicePath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - devicePath + x-kubernetes-list-type: map + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. + Cannot be updated. + items: + description: VolumeMount describes a mounting of a Volume + within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified + (which defaults to None). + type: string + name: + description: This must match the Name of a Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + recursiveReadOnly: + description: |- + RecursiveReadOnly specifies whether read-only mounts should be handled + recursively. + + If ReadOnly is false, this field has no meaning and must be unspecified. + + If ReadOnly is true, and this field is set to Disabled, the mount is not made + recursively read-only. If this field is set to IfPossible, the mount is made + recursively read-only, if it is supported by the container runtime. If this + field is set to Enabled, the mount is made recursively read-only if it is + supported by the container runtime, otherwise the pod will not be started and + an error will be generated to indicate the reason. + + If this field is set to IfPossible or Enabled, MountPropagation must be set to + None (or be unspecified, which defaults to None). + + If this field is not specified, it is treated as an equivalent of Disabled. + type: string + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - mountPath + x-kubernetes-list-type: map + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array maxNumberOfRunningWorkspacesPerCluster: description: |- The maximum number of concurrently running workspaces across the entire Kubernetes cluster. diff --git a/deploy/deployment/openshift/objects/checlusters.org.eclipse.che.CustomResourceDefinition.yaml b/deploy/deployment/openshift/objects/checlusters.org.eclipse.che.CustomResourceDefinition.yaml index 9d8d8a86b..a87f52a93 100644 --- a/deploy/deployment/openshift/objects/checlusters.org.eclipse.che.CustomResourceDefinition.yaml +++ b/deploy/deployment/openshift/objects/checlusters.org.eclipse.che.CustomResourceDefinition.yaml @@ -8009,6 +8009,1538 @@ spec: - IfNotPresent - Never type: string + initContainers: + description: |- + InitContainers defines a list of Kubernetes init containers that are automatically injected into all workspace pods. + Typical uses cases include injecting organization tools/configs, initializing persistent home, etc. + items: + description: A single application container that you want to + run within a pod. + properties: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + command: + description: |- + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment variable + present in a Container. + properties: + name: + description: |- + Name of the environment variable. + May consist of any printable ASCII characters except '='. + type: string + value: + description: |- + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. + properties: + key: + description: The key to select. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + fieldRef: + description: |- + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. + properties: + apiVersion: + description: Version of the schema the FieldPath + is written in terms of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to select in + the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + fileKeyRef: + description: |- + FileKeyRef selects a key of the env file. + Requires the EnvFiles feature gate to be enabled. + properties: + key: + description: |- + The key within the env file. An invalid key will prevent the pod from starting. + The keys defined within a source may consist of any printable ASCII characters except '='. + During Alpha stage of the EnvFiles feature gate, the key size is limited to 128 characters. + type: string + optional: + default: false + description: |- + Specify whether the file or its key must be defined. If the file or key + does not exist, then the env var is not published. + If optional is set to true and the specified key does not exist, + the environment variable will not be set in the Pod's containers. + + If optional is set to false and the specified key does not exist, + an error will be returned during Pod creation. + type: boolean + path: + description: |- + The path within the volume from which to select the file. + Must be relative and may not contain the '..' path or start with '..'. + type: string + volumeName: + description: The name of the volume mount + containing the env file. + type: string + required: + - key + - path + - volumeName + type: object + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. + properties: + containerName: + description: 'Container name: required for + volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output format of + the exposed resources, defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret in the + pod's namespace + properties: + key: + description: The key of the secret to select + from. Must be a valid secret key. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret or + its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + type: object + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source may consist of any printable ASCII characters except '='. + When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source of a + set of ConfigMaps or Secrets + properties: + configMapRef: + description: The ConfigMap to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap must + be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + prefix: + description: |- + Optional text to prepend to the name of each environment variable. + May consist of any printable ASCII characters except '='. + type: string + secretRef: + description: The Secret to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret must be + defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object + type: array + x-kubernetes-list-type: atomic + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + stopSignal: + description: |- + StopSignal defines which signal will be sent to a container when it is being stopped. + If not specified, the default is defined by the container runtime in use. + StopSignal can only be set for Pods with a non-empty .spec.os.name + type: string + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network port in + a single container. + properties: + containerPort: + description: |- + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external port + to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents resource + resize policy for the container. + properties: + resourceName: + description: |- + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: + description: |- + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. + + This field depends on the + DynamicResourceAllocation feature gate. + + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one entry in + PodSpec.ResourceClaims. + properties: + name: + description: |- + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. + type: string + request: + description: |- + Request is the name chosen for a request in the referenced claim. + If empty, everything from the claim is made available, otherwise + only the result of this request. + type: string + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This overrides the pod-level restart policy. When this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Additionally, setting the RestartPolicy as "Always" for the init container will + have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + restartPolicyRules: + description: |- + Represents a list of rules to be checked to determine if the + container should be restarted on exit. The rules are evaluated in + order. Once a rule matches a container exit condition, the remaining + rules are ignored. If no rule matches the container exit condition, + the Container-level restart policy determines the whether the container + is restarted or not. Constraints on the rules: + - At most 20 rules are allowed. + - Rules can have the same action. + - Identical rules are not forbidden in validations. + When rules are specified, container MUST set RestartPolicy explicitly + even it if matches the Pod's RestartPolicy. + items: + description: ContainerRestartRule describes how a container + exit is handled. + properties: + action: + description: |- + Specifies the action taken on a container exit if the requirements + are satisfied. The only possible value is "Restart" to restart the + container. + type: string + exitCodes: + description: Represents the exit codes to check on + container exits. + properties: + operator: + description: |- + Represents the relationship between the container exit code(s) and the + specified values. Possible values are: + - In: the requirement is satisfied if the container exit code is in the + set of specified values. + - NotIn: the requirement is satisfied if the container exit code is + not in the set of specified values. + type: string + values: + description: |- + Specifies the set of values to check for container exit codes. + At most 255 elements are allowed. + items: + format: int32 + type: integer + type: array + x-kubernetes-list-type: set + required: + - operator + type: object + required: + - action + type: object + type: array + x-kubernetes-list-type: atomic + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + appArmorProfile: + description: |- + appArmorProfile is the AppArmor options to use by this container. If set, this profile + overrides the pod's appArmorProfile. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile loaded on the node that should be used. + The profile must be preconfigured on the node to work. + Must match the loaded name of the profile. + Must be set if and only if type is "Localhost". + type: string + type: + description: |- + type indicates which kind of AppArmor profile will be applied. + Valid options are: + Localhost - a profile pre-loaded on the node. + RuntimeDefault - the container runtime's default profile. + Unconfined - no AppArmor enforcement. + type: string + required: + - type + type: object + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + drop: + description: Removed capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default value is Default which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label that applies + to the container. + type: string + role: + description: Role is a SELinux role label that applies + to the container. + type: string + type: + description: Type is a SELinux type label that applies + to the container. + type: string + user: + description: User is a SELinux user label that applies + to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. + type: string + type: + description: |- + type indicates which kind of seccomp profile will be applied. + Valid options are: + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. + type: string + required: + - type + type: object + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the name + of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: string + type: object + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block devices + to be used by the container. + items: + description: volumeDevice describes a mapping of a raw + block device within a container. + properties: + devicePath: + description: devicePath is the path inside of the + container that the device will be mapped to. + type: string + name: + description: name must match the name of a persistentVolumeClaim + in the pod + type: string + required: + - devicePath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - devicePath + x-kubernetes-list-type: map + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. + Cannot be updated. + items: + description: VolumeMount describes a mounting of a Volume + within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified + (which defaults to None). + type: string + name: + description: This must match the Name of a Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + recursiveReadOnly: + description: |- + RecursiveReadOnly specifies whether read-only mounts should be handled + recursively. + + If ReadOnly is false, this field has no meaning and must be unspecified. + + If ReadOnly is true, and this field is set to Disabled, the mount is not made + recursively read-only. If this field is set to IfPossible, the mount is made + recursively read-only, if it is supported by the container runtime. If this + field is set to Enabled, the mount is made recursively read-only if it is + supported by the container runtime, otherwise the pod will not be started and + an error will be generated to indicate the reason. + + If this field is set to IfPossible or Enabled, MountPropagation must be set to + None (or be unspecified, which defaults to None). + + If this field is not specified, it is treated as an equivalent of Disabled. + type: string + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - mountPath + x-kubernetes-list-type: map + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array maxNumberOfRunningWorkspacesPerCluster: description: |- The maximum number of concurrently running workspaces across the entire Kubernetes cluster. diff --git a/go.mod b/go.mod index 185ea8601..caa9286eb 100644 --- a/go.mod +++ b/go.mod @@ -5,7 +5,7 @@ go 1.25.5 require ( github.com/che-incubator/kubernetes-image-puller-operator v0.0.0-20250214104625-65e5ec32f521 github.com/devfile/api/v2 v2.3.1-alpha.0.20250521155908-5c3d7b99d252 - github.com/devfile/devworkspace-operator v0.2.1-0.20251219093002-8276d1f4e287 + github.com/devfile/devworkspace-operator v0.39.0 github.com/go-logr/logr v1.4.3 github.com/google/go-cmp v0.7.0 github.com/openshift/api v0.0.0-20250529074221-97812373b6b4 diff --git a/go.sum b/go.sum index e49a2ef7b..01f717dc5 100644 --- a/go.sum +++ b/go.sum @@ -1648,8 +1648,8 @@ github.com/denisenkom/go-mssqldb v0.0.0-20190515213511-eb9f6a1743f3/go.mod h1:zA github.com/denverdino/aliyungo v0.0.0-20190125010748-a747050bb1ba/go.mod h1:dV8lFg6daOBZbT6/BDGIz6Y3WFGn8juu6G+CQ6LHtl0= github.com/devfile/api/v2 v2.3.1-alpha.0.20250521155908-5c3d7b99d252 h1:C6DNKt+GHWe7vVD2ic73lR10UlC8egbxAY28U7A5IZA= github.com/devfile/api/v2 v2.3.1-alpha.0.20250521155908-5c3d7b99d252/go.mod h1:ZdlwgS98m5O+i5H+q/COJt4PAe2ZGoAq8tJ7+s0UmAU= -github.com/devfile/devworkspace-operator v0.2.1-0.20251219093002-8276d1f4e287 h1:n3hlfc7b7FymIqkEi32sJcup55mdtwBBoBhmIkm0YOw= -github.com/devfile/devworkspace-operator v0.2.1-0.20251219093002-8276d1f4e287/go.mod h1:jGaQ+1ih3y/BSkkNCXq7J4Nv/RouxnnaFHXLEc+mXWk= +github.com/devfile/devworkspace-operator v0.39.0 h1:AqiIuQvZEVfnX8q+Y97h90AFa+kFax8PVJiROmO6woM= +github.com/devfile/devworkspace-operator v0.39.0/go.mod h1:jGaQ+1ih3y/BSkkNCXq7J4Nv/RouxnnaFHXLEc+mXWk= github.com/dgraph-io/badger/v3 v3.2103.2/go.mod h1:RHo4/GmYcKKh5Lxu63wLEMHJ70Pac2JqZRYGhlyAo2M= github.com/dgraph-io/ristretto v0.1.0/go.mod h1:fux0lOrBhrVCJd3lcTHsIJhq1T2rokOu6v9Vcb3Q9ug= github.com/dgrijalva/jwt-go v3.2.0+incompatible/go.mod h1:E3ru+11k8xSBh+hMPgOLZmtrrCbhqsmaPHjLKYnJCaQ= diff --git a/helmcharts/next/crds/checlusters.org.eclipse.che.CustomResourceDefinition.yaml b/helmcharts/next/crds/checlusters.org.eclipse.che.CustomResourceDefinition.yaml index c61793a64..102fdcb6b 100644 --- a/helmcharts/next/crds/checlusters.org.eclipse.che.CustomResourceDefinition.yaml +++ b/helmcharts/next/crds/checlusters.org.eclipse.che.CustomResourceDefinition.yaml @@ -8009,6 +8009,1538 @@ spec: - IfNotPresent - Never type: string + initContainers: + description: |- + InitContainers defines a list of Kubernetes init containers that are automatically injected into all workspace pods. + Typical uses cases include injecting organization tools/configs, initializing persistent home, etc. + items: + description: A single application container that you want to + run within a pod. + properties: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + command: + description: |- + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + x-kubernetes-list-type: atomic + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment variable + present in a Container. + properties: + name: + description: |- + Name of the environment variable. + May consist of any printable ASCII characters except '='. + type: string + value: + description: |- + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. + properties: + key: + description: The key to select. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + fieldRef: + description: |- + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. + properties: + apiVersion: + description: Version of the schema the FieldPath + is written in terms of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to select in + the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + fileKeyRef: + description: |- + FileKeyRef selects a key of the env file. + Requires the EnvFiles feature gate to be enabled. + properties: + key: + description: |- + The key within the env file. An invalid key will prevent the pod from starting. + The keys defined within a source may consist of any printable ASCII characters except '='. + During Alpha stage of the EnvFiles feature gate, the key size is limited to 128 characters. + type: string + optional: + default: false + description: |- + Specify whether the file or its key must be defined. If the file or key + does not exist, then the env var is not published. + If optional is set to true and the specified key does not exist, + the environment variable will not be set in the Pod's containers. + + If optional is set to false and the specified key does not exist, + an error will be returned during Pod creation. + type: boolean + path: + description: |- + The path within the volume from which to select the file. + Must be relative and may not contain the '..' path or start with '..'. + type: string + volumeName: + description: The name of the volume mount + containing the env file. + type: string + required: + - key + - path + - volumeName + type: object + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. + properties: + containerName: + description: 'Container name: required for + volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output format of + the exposed resources, defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret in the + pod's namespace + properties: + key: + description: The key of the secret to select + from. Must be a valid secret key. + type: string + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret or + its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + type: object + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source may consist of any printable ASCII characters except '='. + When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source of a + set of ConfigMaps or Secrets + properties: + configMapRef: + description: The ConfigMap to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the ConfigMap must + be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + prefix: + description: |- + Optional text to prepend to the name of each environment variable. + May consist of any printable ASCII characters except '='. + type: string + secretRef: + description: The Secret to select from + properties: + name: + default: "" + description: |- + Name of the referent. + This field is effectively required, but due to backwards compatibility is + allowed to be empty. Instances of this type with an empty value here are + almost certainly wrong. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + optional: + description: Specify whether the Secret must be + defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object + type: array + x-kubernetes-list-type: atomic + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies a command to execute + in the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents a duration that the + container should sleep. + properties: + seconds: + description: Seconds is the number of seconds + to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for backward compatibility. There is no validation of this field and + lifecycle hooks will fail at runtime when it is specified. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + stopSignal: + description: |- + StopSignal defines which signal will be sent to a container when it is being stopped. + If not specified, the default is defined by the container runtime in use. + StopSignal can only be set for Pods with a non-empty .spec.os.name + type: string + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network port in + a single container. + properties: + containerPort: + description: |- + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external port + to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents resource + resize policy for the container. + properties: + resourceName: + description: |- + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: + description: |- + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. + + This field depends on the + DynamicResourceAllocation feature gate. + + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one entry in + PodSpec.ResourceClaims. + properties: + name: + description: |- + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. + type: string + request: + description: |- + Request is the name chosen for a request in the referenced claim. + If empty, everything from the claim is made available, otherwise + only the result of this request. + type: string + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This overrides the pod-level restart policy. When this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Additionally, setting the RestartPolicy as "Always" for the init container will + have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + restartPolicyRules: + description: |- + Represents a list of rules to be checked to determine if the + container should be restarted on exit. The rules are evaluated in + order. Once a rule matches a container exit condition, the remaining + rules are ignored. If no rule matches the container exit condition, + the Container-level restart policy determines the whether the container + is restarted or not. Constraints on the rules: + - At most 20 rules are allowed. + - Rules can have the same action. + - Identical rules are not forbidden in validations. + When rules are specified, container MUST set RestartPolicy explicitly + even it if matches the Pod's RestartPolicy. + items: + description: ContainerRestartRule describes how a container + exit is handled. + properties: + action: + description: |- + Specifies the action taken on a container exit if the requirements + are satisfied. The only possible value is "Restart" to restart the + container. + type: string + exitCodes: + description: Represents the exit codes to check on + container exits. + properties: + operator: + description: |- + Represents the relationship between the container exit code(s) and the + specified values. Possible values are: + - In: the requirement is satisfied if the container exit code is in the + set of specified values. + - NotIn: the requirement is satisfied if the container exit code is + not in the set of specified values. + type: string + values: + description: |- + Specifies the set of values to check for container exit codes. + At most 255 elements are allowed. + items: + format: int32 + type: integer + type: array + x-kubernetes-list-type: set + required: + - operator + type: object + required: + - action + type: object + type: array + x-kubernetes-list-type: atomic + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + appArmorProfile: + description: |- + appArmorProfile is the AppArmor options to use by this container. If set, this profile + overrides the pod's appArmorProfile. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile loaded on the node that should be used. + The profile must be preconfigured on the node to work. + Must match the loaded name of the profile. + Must be set if and only if type is "Localhost". + type: string + type: + description: |- + type indicates which kind of AppArmor profile will be applied. + Valid options are: + Localhost - a profile pre-loaded on the node. + RuntimeDefault - the container runtime's default profile. + Unconfined - no AppArmor enforcement. + type: string + required: + - type + type: object + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + drop: + description: Removed capabilities + items: + description: Capability represent POSIX capabilities + type + type: string + type: array + x-kubernetes-list-type: atomic + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default value is Default which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label that applies + to the container. + type: string + role: + description: Role is a SELinux role label that applies + to the container. + type: string + type: + description: Type is a SELinux type label that applies + to the container. + type: string + user: + description: User is a SELinux user label that applies + to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. + type: string + type: + description: |- + type indicates which kind of seccomp profile will be applied. + Valid options are: + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. + type: string + required: + - type + type: object + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the name + of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: string + type: object + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies a command to execute in + the container. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + x-kubernetes-list-type: atomic + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies a GRPC HealthCheckRequest. + properties: + port: + description: Port number of the gRPC service. Number + must be in the range 1 to 65535. + format: int32 + type: integer + service: + default: "" + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies an HTTP GET request to + perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the request. + HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom header + to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + x-kubernetes-list-type: atomic + path: + description: Path to access on the HTTP server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies a connection to a TCP + port. + properties: + host: + description: 'Optional: Host name to connect to, + defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block devices + to be used by the container. + items: + description: volumeDevice describes a mapping of a raw + block device within a container. + properties: + devicePath: + description: devicePath is the path inside of the + container that the device will be mapped to. + type: string + name: + description: name must match the name of a persistentVolumeClaim + in the pod + type: string + required: + - devicePath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - devicePath + x-kubernetes-list-type: map + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. + Cannot be updated. + items: + description: VolumeMount describes a mounting of a Volume + within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + When RecursiveReadOnly is set to IfPossible or to Enabled, MountPropagation must be None or unspecified + (which defaults to None). + type: string + name: + description: This must match the Name of a Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + recursiveReadOnly: + description: |- + RecursiveReadOnly specifies whether read-only mounts should be handled + recursively. + + If ReadOnly is false, this field has no meaning and must be unspecified. + + If ReadOnly is true, and this field is set to Disabled, the mount is not made + recursively read-only. If this field is set to IfPossible, the mount is made + recursively read-only, if it is supported by the container runtime. If this + field is set to Enabled, the mount is made recursively read-only if it is + supported by the container runtime, otherwise the pod will not be started and + an error will be generated to indicate the reason. + + If this field is set to IfPossible or Enabled, MountPropagation must be set to + None (or be unspecified, which defaults to None). + + If this field is not specified, it is treated as an equivalent of Disabled. + type: string + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + x-kubernetes-list-map-keys: + - mountPath + x-kubernetes-list-type: map + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array maxNumberOfRunningWorkspacesPerCluster: description: |- The maximum number of concurrently running workspaces across the entire Kubernetes cluster. diff --git a/pkg/deploy/dev-workspace-config/dev_workspace_config.go b/pkg/deploy/dev-workspace-config/dev_workspace_config.go index 6dcfd21f0..a297a675a 100644 --- a/pkg/deploy/dev-workspace-config/dev_workspace_config.go +++ b/pkg/deploy/dev-workspace-config/dev_workspace_config.go @@ -117,6 +117,8 @@ func updateWorkspaceConfig(ctx *chetypes.DeployContext, operatorConfig *controll updateHostUsers(ctx.CheCluster, operatorConfig.Workspace) + updateInitContainers(devEnvironments, operatorConfig.Workspace) + // If the CheCluster has a configured proxy, or if the Che Operator has detected a proxy configuration, // we need to disable automatic proxy handling in the DevWorkspace Operator as its implementation collides // with ours -- they set environment variables the deployment spec explicitly, which overrides the proxy-settings @@ -291,6 +293,10 @@ func updateHostUsers(cheCluster *chev2.CheCluster, workspaceConfig *controllerv1 } } +func updateInitContainers(devEnvironments *chev2.CheClusterDevEnvironments, workspaceConfig *controllerv1alpha1.WorkspaceConfig) { + workspaceConfig.InitContainers = devEnvironments.InitContainers +} + func disableDWOProxy(routingConfig *controllerv1alpha1.RoutingConfig) { // Since we create proxy configmaps to mount proxy settings, we want to disable // proxy handling in DWO; otherwise the env vars added by DWO will override the env diff --git a/vendor/github.com/devfile/devworkspace-operator/apis/controller/v1alpha1/devworkspaceoperatorconfig_types.go b/vendor/github.com/devfile/devworkspace-operator/apis/controller/v1alpha1/devworkspaceoperatorconfig_types.go index 1e5037992..bdbcdf377 100644 --- a/vendor/github.com/devfile/devworkspace-operator/apis/controller/v1alpha1/devworkspaceoperatorconfig_types.go +++ b/vendor/github.com/devfile/devworkspace-operator/apis/controller/v1alpha1/devworkspaceoperatorconfig_types.go @@ -252,6 +252,9 @@ type WorkspaceConfig struct { // If the feature is disabled, setting this field may cause an endless workspace start loop. // +kubebuilder:validation:Optional HostUsers *bool `json:"hostUsers,omitempty"` + // InitContainers defines a list of Kubernetes init containers that are automatically injected into all workspace pods. + // Typical uses cases include injecting organization tools/configs, initializing persistent home, etc. + InitContainers []corev1.Container `json:"initContainers,omitempty"` } type WebhookConfig struct { diff --git a/vendor/github.com/devfile/devworkspace-operator/apis/controller/v1alpha1/zz_generated.deepcopy.go b/vendor/github.com/devfile/devworkspace-operator/apis/controller/v1alpha1/zz_generated.deepcopy.go index e4f35502c..00f941bcb 100644 --- a/vendor/github.com/devfile/devworkspace-operator/apis/controller/v1alpha1/zz_generated.deepcopy.go +++ b/vendor/github.com/devfile/devworkspace-operator/apis/controller/v1alpha1/zz_generated.deepcopy.go @@ -895,6 +895,13 @@ func (in *WorkspaceConfig) DeepCopyInto(out *WorkspaceConfig) { *out = new(bool) **out = **in } + if in.InitContainers != nil { + in, out := &in.InitContainers, &out.InitContainers + *out = make([]v1.Container, len(*in)) + for i := range *in { + (*in)[i].DeepCopyInto(&(*out)[i]) + } + } } // DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new WorkspaceConfig. diff --git a/vendor/github.com/devfile/devworkspace-operator/pkg/config/sync.go b/vendor/github.com/devfile/devworkspace-operator/pkg/config/sync.go index 2eaa021bb..e65222034 100644 --- a/vendor/github.com/devfile/devworkspace-operator/pkg/config/sync.go +++ b/vendor/github.com/devfile/devworkspace-operator/pkg/config/sync.go @@ -475,6 +475,14 @@ func mergeConfig(from, to *controller.OperatorConfiguration) { if from.Workspace.HostUsers != nil { to.Workspace.HostUsers = from.Workspace.HostUsers } + + if from.Workspace.InitContainers != nil { + initContainersCopy := make([]corev1.Container, len(from.Workspace.InitContainers)) + for i, container := range from.Workspace.InitContainers { + initContainersCopy[i] = *container.DeepCopy() + } + to.Workspace.InitContainers = initContainersCopy + } } } @@ -736,6 +744,13 @@ func GetCurrentConfigString(currConfig *controller.OperatorConfiguration) string if workspace.HostUsers != nil { config = append(config, fmt.Sprintf("workspace.hostUsers=%t", *workspace.HostUsers)) } + if len(workspace.InitContainers) > 0 { + initContainerNames := make([]string, len(workspace.InitContainers)) + for i, container := range workspace.InitContainers { + initContainerNames[i] = container.Name + } + config = append(config, fmt.Sprintf("workspace.initContainers=[%s]", strings.Join(initContainerNames, ", "))) + } } if currConfig.EnableExperimentalFeatures != nil && *currConfig.EnableExperimentalFeatures { config = append(config, "enableExperimentalFeatures=true") diff --git a/vendor/github.com/devfile/devworkspace-operator/pkg/constants/constants.go b/vendor/github.com/devfile/devworkspace-operator/pkg/constants/constants.go index 586eedc1d..07b3a4c3d 100644 --- a/vendor/github.com/devfile/devworkspace-operator/pkg/constants/constants.go +++ b/vendor/github.com/devfile/devworkspace-operator/pkg/constants/constants.go @@ -45,6 +45,8 @@ const ( HomeInitEventId = "init-persistent-home" + DefaultDisableHomeInitContainer = false + SshAgentStartEventId = "init-ssh-agent-command" ServiceAccount = "devworkspace" diff --git a/vendor/modules.txt b/vendor/modules.txt index 6f2f23d12..0b7d14a93 100644 --- a/vendor/modules.txt +++ b/vendor/modules.txt @@ -25,7 +25,7 @@ github.com/davecgh/go-spew/spew github.com/devfile/api/v2/pkg/apis/workspaces/v1alpha2 github.com/devfile/api/v2/pkg/attributes github.com/devfile/api/v2/pkg/devfile -# github.com/devfile/devworkspace-operator v0.2.1-0.20251219093002-8276d1f4e287 +# github.com/devfile/devworkspace-operator v0.39.0 ## explicit; go 1.24.0 github.com/devfile/devworkspace-operator/apis/controller/v1alpha1 github.com/devfile/devworkspace-operator/controllers/controller/devworkspacerouting From 1bb1c7336cbf0cc6b40b7162a7283a18099fd5ef Mon Sep 17 00:00:00 2001 From: Anatolii Bazko Date: Thu, 5 Feb 2026 10:08:23 +0100 Subject: [PATCH 2/3] chore: initContainers field Signed-off-by: Anatolii Bazko --- build/scripts/clear-defined-test.sh | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/build/scripts/clear-defined-test.sh b/build/scripts/clear-defined-test.sh index e0f61ee22..5b5499280 100755 --- a/build/scripts/clear-defined-test.sh +++ b/build/scripts/clear-defined-test.sh @@ -86,6 +86,8 @@ declare -A replaced_modules=( ["go.opencensus.io v0.24.0"]="census-instrumentation/opencensus-go b1a01ee95db0e690d91d7193d037447816fae4c5" # https://github.com/sean-/seed/tree/e2103e2c35297fb7e17febb81e49b312087a2372 ["github.com/sean-/seed v0.0.0-20170313163322-e2103e2c3529"]="sean-/seed e2103e2c35297fb7e17febb81e49b312087a2372" + # https://github.com/decred/dcrd/commit/5444fa50b93dbcbd6a08c75da3eccc32490fb2b2 + ["github.com/decred/dcrd/dcrec/secp256k1/v4 v4.0.0-20210816181553-5444fa50b93d"]="decred/dcrd 5444fa50b93dbcbd6a08c75da3eccc32490fb2b2" ) # replaces to have a correct link for clearlydefined.io api request @@ -99,16 +101,17 @@ declare -A replaced_paths=( declare -A replaced_api_suffix=( ["census-instrumentation/opencensus-go"]="git/github" ["sean-/seed"]="git/github" + ["decred/dcrd"]="git/github" ) # Exceptions for dependencies that are not yet harvested in clearlydefined.io # License must be checked manually declare -A ignored_paths=( - ["github.com/decred/dcrd/dcrec/secp256k1/v4"]="Harvesting is in progress" + ["github.com/devfile/devworkspace-operator"]="Harvesting is in progress" ) declare -A ignored_paths_license=( - ["github.com/decred/dcrd/dcrec/secp256k1/v4"]="ISC" + ["github.com/devfile/devworkspace-operator"]="Apache-2.0" ) retryUrl() { From c8fd6a63135ba1688435ff6d7d4dbabef6667f9d Mon Sep 17 00:00:00 2001 From: Anatolii Bazko Date: Fri, 6 Feb 2026 11:32:07 +0100 Subject: [PATCH 3/3] chore: initContainers field Signed-off-by: Anatolii Bazko --- .../dev_workspace_config_test.go | 201 ++++++++++++++++++ 1 file changed, 201 insertions(+) diff --git a/pkg/deploy/dev-workspace-config/dev_workspace_config_test.go b/pkg/deploy/dev-workspace-config/dev_workspace_config_test.go index a05c9162b..dd67e6fca 100644 --- a/pkg/deploy/dev-workspace-config/dev_workspace_config_test.go +++ b/pkg/deploy/dev-workspace-config/dev_workspace_config_test.go @@ -3125,3 +3125,204 @@ func TestReconcileDevWorkspaceIgnoredUnrecoverableEvents(t *testing.T) { }) } } + +func TestReconcileDevWorkspaceConfigForInitContainers(t *testing.T) { + type testCase struct { + name string + cheCluster *chev2.CheCluster + existedObjects []client.Object + expectedOperatorConfig *controllerv1alpha1.OperatorConfiguration + } + + testCases := []testCase{ + { + name: "Create DevWorkspaceOperatorConfig with InitContainers", + cheCluster: &chev2.CheCluster{ + ObjectMeta: metav1.ObjectMeta{ + Namespace: "eclipse-che", + Name: "eclipse-che", + }, + Spec: chev2.CheClusterSpec{ + DevEnvironments: chev2.CheClusterDevEnvironments{ + InitContainers: []corev1.Container{ + { + Name: "init-container-1", + Image: "init-image:latest", + Command: []string{ + "/bin/sh", + "-c", + "echo 'Initializing workspace'", + }, + }, + { + Name: "init-container-2", + Image: "init-image-2:v1.0", + Env: []corev1.EnvVar{ + { + Name: "INIT_VAR", + Value: "init-value", + }, + }, + }, + }, + }, + }, + }, + expectedOperatorConfig: &controllerv1alpha1.OperatorConfiguration{ + Workspace: &controllerv1alpha1.WorkspaceConfig{ + InitContainers: []corev1.Container{ + { + Name: "init-container-1", + Image: "init-image:latest", + Command: []string{ + "/bin/sh", + "-c", + "echo 'Initializing workspace'", + }, + }, + { + Name: "init-container-2", + Image: "init-image-2:v1.0", + Env: []corev1.EnvVar{ + { + Name: "INIT_VAR", + Value: "init-value", + }, + }, + }, + }, + }, + }, + }, + { + name: "Create DevWorkspaceOperatorConfig without InitContainers", + cheCluster: &chev2.CheCluster{ + ObjectMeta: metav1.ObjectMeta{ + Namespace: "eclipse-che", + Name: "eclipse-che", + }, + Spec: chev2.CheClusterSpec{ + DevEnvironments: chev2.CheClusterDevEnvironments{}, + }, + }, + expectedOperatorConfig: &controllerv1alpha1.OperatorConfiguration{ + Workspace: &controllerv1alpha1.WorkspaceConfig{}, + }, + }, + { + name: "Update DevWorkspaceOperatorConfig with InitContainers", + cheCluster: &chev2.CheCluster{ + ObjectMeta: metav1.ObjectMeta{ + Namespace: "eclipse-che", + Name: "eclipse-che", + }, + Spec: chev2.CheClusterSpec{ + DevEnvironments: chev2.CheClusterDevEnvironments{ + InitContainers: []corev1.Container{ + { + Name: "new-init-container", + Image: "new-init:v2.0", + VolumeMounts: []corev1.VolumeMount{ + { + Name: "config-volume", + MountPath: "/etc/config", + }, + }, + }, + }, + }, + }, + }, + existedObjects: []client.Object{ + &controllerv1alpha1.DevWorkspaceOperatorConfig{ + ObjectMeta: metav1.ObjectMeta{ + Name: devWorkspaceConfigName, + Namespace: "eclipse-che", + }, + TypeMeta: metav1.TypeMeta{ + Kind: "DevWorkspaceOperatorConfig", + APIVersion: controllerv1alpha1.GroupVersion.String(), + }, + Config: &controllerv1alpha1.OperatorConfiguration{ + Workspace: &controllerv1alpha1.WorkspaceConfig{ + InitContainers: []corev1.Container{ + { + Name: "old-init-container", + Image: "old-init:v1.0", + }, + }, + }, + }, + }, + }, + expectedOperatorConfig: &controllerv1alpha1.OperatorConfiguration{ + Workspace: &controllerv1alpha1.WorkspaceConfig{ + InitContainers: []corev1.Container{ + { + Name: "new-init-container", + Image: "new-init:v2.0", + VolumeMounts: []corev1.VolumeMount{ + { + Name: "config-volume", + MountPath: "/etc/config", + }, + }, + }, + }, + }, + }, + }, + { + name: "Clear InitContainers from DevWorkspaceOperatorConfig", + cheCluster: &chev2.CheCluster{ + ObjectMeta: metav1.ObjectMeta{ + Namespace: "eclipse-che", + Name: "eclipse-che", + }, + Spec: chev2.CheClusterSpec{ + DevEnvironments: chev2.CheClusterDevEnvironments{}, + }, + }, + existedObjects: []client.Object{ + &controllerv1alpha1.DevWorkspaceOperatorConfig{ + ObjectMeta: metav1.ObjectMeta{ + Name: devWorkspaceConfigName, + Namespace: "eclipse-che", + }, + TypeMeta: metav1.TypeMeta{ + Kind: "DevWorkspaceOperatorConfig", + APIVersion: controllerv1alpha1.GroupVersion.String(), + }, + Config: &controllerv1alpha1.OperatorConfiguration{ + Workspace: &controllerv1alpha1.WorkspaceConfig{ + InitContainers: []corev1.Container{ + { + Name: "init-to-remove", + Image: "init:v1.0", + }, + }, + }, + }, + }, + }, + expectedOperatorConfig: &controllerv1alpha1.OperatorConfiguration{ + Workspace: &controllerv1alpha1.WorkspaceConfig{}, + }, + }, + } + + for _, testCase := range testCases { + t.Run(testCase.name, func(t *testing.T) { + deployContext := test.NewCtxBuilder().WithCheCluster(testCase.cheCluster).WithObjects(testCase.existedObjects...).Build() + + devWorkspaceConfigReconciler := NewDevWorkspaceConfigReconciler() + test.EnsureReconcile(t, deployContext, devWorkspaceConfigReconciler.Reconcile) + + dwoc := &controllerv1alpha1.DevWorkspaceOperatorConfig{} + err := deployContext.ClusterAPI.Client.Get(context.TODO(), types.NamespacedName{Name: devWorkspaceConfigName, Namespace: testCase.cheCluster.Namespace}, dwoc) + assert.NoError(t, err) + + assert.Equal(t, testCase.expectedOperatorConfig.Workspace.InitContainers, dwoc.Config.Workspace.InitContainers) + }) + } +}