Can't get it to read.

[iCarl]

Hi,
I'm getting "Bad reading from chirp, resetting..."
MQTT and Wifi works well.
What could be the issue?
I'm using Wemos D1 Mini

[jpwsutton]

Sounds like there is an issue communicating with the Chirp over I2C, might be good to confirm that you've got the correct pins hooked up to the ESP8266 (https://wemakethings.net/chirp/)

[iCarl]

I tries and got it ro read humidity and light

[jpwsutton]

Sounds like you've changed the code then, as this project was only written to detect temperature & humidity from the DHT11, and the moisture level from a Chirp sensor.. You might need to look at what you've changed in the code to see why it's not working.