CTDs Editing Virtual and XTouch Configs #143
Description
Greetings Mark,
I've had several CTDs editing my XTouch Mini and Virtual keypads for Laminar's B737 and XP12.3.3.
I load the aircraft and work on the 2 keypads to create defaults for other Laminar a/c. The virtual is a mirror of the XTouch that I use on a separate monitor to identify the xtouch controls. It can also carry out most of the commands and controls that the XTouch carries out. No BATT or PWR, just editing configurations at the gate. I was adding commands for speedbrake toggles "up/down one" and parking brake toggle. On the XTouch, I used datarefs to operate button lights. On the virtual, I used datarefs for background colours and key labels. All datarefs/commands are Laminar in origin. 3 of the several logs are attached as are my config files in case they're useful to you.
Any thoughts you might have on a cause would be appreciated. XCamera and Fly with Lua are installed. I use a mac studio.
Does XKeyPad need to use XP12 in Rosetta mode? The above was not using Rosetta.
Is it possible that running a virtual keypad concurrently with the XTouch might cause a fatal conflict?
I'm not in a rush and thanks in advance. I've been away but I had completed 5 good flights with the Laminar 737 with and without Rosetta (troubleshooting). I'm surprised that this issue has cropped up with a Laminar a/c. I won't be updating to 12.4 until the dust settles on it (looking at the forum).
regards
John
Log [XTouch edit].txt
Log [XTouch2].txt