diff --git a/docs/e/e24c/README.md b/docs/e/e24c/README.md index 8abdddc2d..e08bb13ae 100644 --- a/docs/e/e24c/README.md +++ b/docs/e/e24c/README.md @@ -113,23 +113,24 @@ Radxa E24C 裸板相比铝合金外壳版本可以使用更多外设接口；但 -| 序号 | 说明 | 数量 | -| :--: | :------------------------------------------- | :--: | -| ① | 电源接口：DC5525 | 1 | -| ② | 板载eMMC | 1 | -| ③ | USB 2.0 Type‑C型接口：从设备加调试二合一接口 | 1 | -| ④ | 用户按键 | 1 | -| ⑤ | USB 2.0 Type‑A型接口 | 3 | -| ⑥ | RTC电池接口 | 1 | -| ⑦ | MicroSD卡槽 | 1 | -| ⑧ | GPIO：14Pin拓展排针 | 1 | -| ⑨ | LED状态指示灯(1个电源指示灯，4个网口指示灯) | 5 | -| ⑩ | 电源按键 | 1 | -| ⑪ | 风扇接口 | 1 | -| ⑫ | Maskrom按键 | 1 | -| ⑬ | 千兆以太网接口(WAN/LAN可配置) | 4 | -| ⑭ | HDMI2.1输出接口 | 1 | -| ⑮ | M.2 NVME SSD接口 | 1 | +| 序号 | 说明 | 数量 | +| :--: | :-------------------------------------------- | :--: | +| 1 | 电源接口：DC5525 | 1 | +| 2 | 板载 eMMC | 1 | +| 3 | USB 2.0 Type‑C 型接口：从设备加调试二合一接口 | 1 | +| 4 | 用户按键 | 1 | +| 5 | USB 2.0 Type‑A 型接口 | 3 | +| 6 | RTC 电池接口 | 1 | +| 7 | MicroSD 卡槽 | 1 | +| 8 | GPIO：14Pin 拓展排针 | 1 | +| 9 | LED 状态指示灯(1个电源指示灯，4个网口指示灯) | 5 | +| 10 | 电源按键 | 1 | +| 11 | 风扇接口 | 1 | +| 12 | Maskrom 按键 | 1 | +| 13 | 千兆以太网接口( WAN/LAN 可配置) | 4 | +| 14 | HDMI2.1 输出接口 | 1 | +| 15 | M.2 NVME SSD 接口 | 1 | +| 16 | SPI Nor Flash | 1 | diff --git a/docs/e/e24c/hardware-usage/hardware-interface.md b/docs/e/e24c/hardware-usage/hardware-interface.md index 479e36616..3405eb471 100644 --- a/docs/e/e24c/hardware-usage/hardware-interface.md +++ b/docs/e/e24c/hardware-usage/hardware-interface.md @@ -45,21 +45,22 @@ Radxa E24C 详细的硬件接口线序，参考[硬件原理图](../download) | 序号 | 说明 | 数量 | | :--: | :-------------------------------------------- | :--: | -| ① | 电源接口：DC5525 | 1 | -| ② | 板载 eMMC | 1 | -| ③ | USB 2.0 Type‑C 型接口：从设备加调试二合一接口 | 1 | -| ④ | 用户按键 | 1 | -| ⑤ | USB 2.0 Type‑A 型接口 | 3 | -| ⑥ | RTC 电池接口 | 1 | -| ⑦ | MicroSD 卡槽 | 1 | -| ⑧ | GPIO：14Pin 拓展排针 | 1 | -| ⑨ | LED 状态指示灯(1个电源指示灯，4个网口指示灯) | 5 | -| ⑩ | 电源按键 | 1 | -| ⑪ | 风扇接口 | 1 | -| ⑫ | Maskrom 按键 | 1 | -| ⑬ | 千兆以太网接口( WAN/LAN 可配置) | 4 | -| ⑭ | HDMI2.1 输出接口 | 1 | -| ⑮ | M.2 NVME SSD 接口 | 1 | +| 1 | 电源接口：DC5525 | 1 | +| 2 | 板载 eMMC | 1 | +| 3 | USB 2.0 Type‑C 型接口：从设备加调试二合一接口 | 1 | +| 4 | 用户按键 | 1 | +| 5 | USB 2.0 Type‑A 型接口 | 3 | +| 6 | RTC 电池接口 | 1 | +| 7 | MicroSD 卡槽 | 1 | +| 8 | GPIO：14Pin 拓展排针 | 1 | +| 9 | LED 状态指示灯(1个电源指示灯，4个网口指示灯) | 5 | +| 10 | 电源按键 | 1 | +| 11 | 风扇接口 | 1 | +| 12 | Maskrom 按键 | 1 | +| 13 | 千兆以太网接口( WAN/LAN 可配置) | 4 | +| 14 | HDMI2.1 输出接口 | 1 | +| 15 | M.2 NVME SSD 接口 | 1 | +| 16 | SPI Nor Flash | 1 | ### MicroSD 卡槽 diff --git a/docs/orion/o6/getting-started/install-system/udisk_system.md b/docs/orion/o6/getting-started/install-system/udisk_system.md index 72764a9e4..772b7f6c3 100644 --- a/docs/orion/o6/getting-started/install-system/udisk_system.md +++ b/docs/orion/o6/getting-started/install-system/udisk_system.md @@ -35,7 +35,7 @@ Radxa OS 的默认凭据如下： ## 使用系统 -成功登录系统后，您就可以在瑞莎星睿 O6N 上进行系统配置与开发。 +成功登录系统后，您就可以在瑞莎星睿 O6 上进行系统配置与开发。
diff --git a/docs/rock5/rock5b/getting-started/install-os/erase_spi-flash.md b/docs/rock5/rock5b/getting-started/install-os/erase_spi-flash.md index e6b8ce546..c25f74304 100644 --- a/docs/rock5/rock5b/getting-started/install-os/erase_spi-flash.md +++ b/docs/rock5/rock5b/getting-started/install-os/erase_spi-flash.md @@ -22,4 +22,4 @@ sidebar_position: 4 ## 不能启动到系统 -[请参考通过 USB 线烧录镜像部分](/rock5/rock5b/low-level-dev/maskrom) +[请参考通过 USB 线烧录镜像部分](../../low-level-dev/install-os/) diff --git a/docs/rock5/rock5b/low-level-dev/install-os/README.md b/docs/rock5/rock5b/low-level-dev/install-os/README.md index 41d671b17..a4b075616 100644 --- a/docs/rock5/rock5b/low-level-dev/install-os/README.md +++ b/docs/rock5/rock5b/low-level-dev/install-os/README.md @@ -3,3 +3,5 @@ sidebar_position: 1 --- # 通过线刷安装系统 + + diff --git a/docs/som/cm/cm3/low-level-dev/maskrom/erase.md b/docs/som/cm/cm3/low-level-dev/maskrom/erase.md index 97ecb94ec..f69f20803 100644 --- a/docs/som/cm/cm3/low-level-dev/maskrom/erase.md +++ b/docs/som/cm/cm3/low-level-dev/maskrom/erase.md @@ -10,11 +10,11 @@ import ERASE from "../../../../../common/dev/\_erase-spi-emmc.mdx";
    -
  1. 把 CM3 安装到 IO 板上
    2. -
  2. 移除 MicroSD 卡
    3. -
  3. 按住 SPI Disable 按键/按住 eMMC Disable 按键
    4. -
  4. 将 USB-A 转 MicroUSB 连接线插入 Radxa CM3 IO OTG 端口（Micro USB 端口），另一端插入电脑
    5. -
  5. 插入电源线上电，如果电源绿灯常亮则成功进入 Maskrom 模式
    6. +
  6. 将 CM3 安装到 CM3 IO 板上
    7. +
  7. 移除（拔出）CM3 IO 板上的 MicroSD 卡
    8. +
  8. 在上电前按住 CM3 上的 SPI Disable 按键或按住 CM3 上的 eMMC Disable 按键，并保持按住
    9. +
  9. 将 USB-A 转 Micro-USB 连接线插入 CM3 IO 板的 OTG 端口（Micro-USB 端口），另一端插入电脑
    10. +
  10. 插入 DC 12V 电源为 CM3 IO 板供电；如果电源绿灯常亮，则已成功进入 Maskrom 模式（此时可松开按键）
:::tip diff --git a/docs/som/cm/cm3/low-level-dev/maskrom/linux.md b/docs/som/cm/cm3/low-level-dev/maskrom/linux.md index 3b3efd37a..a26840004 100644 --- a/docs/som/cm/cm3/low-level-dev/maskrom/linux.md +++ b/docs/som/cm/cm3/low-level-dev/maskrom/linux.md @@ -14,11 +14,11 @@ import Rkdeveloptool from "../../../../../common/dev/\_rkdeveloptoolV2.mdx";
    -
  1. 把 CM3 安装到 IO 板上
    2. -
  2. 移除 MicroSD 卡
    3. -
  3. 按住 SPI Disable 按键
    4. -
  4. 将 USB-A 转 MicroUSB 连接线插入 Radxa CM3 IO OTG 端口（Micro USB 端口），另一端插入电脑
    5. -
  5. 插入电源线上电，如果电源绿灯常亮则成功进入 Maskrom 模式
    6. +
  6. 将 CM3 安装到 CM3 IO 板上
    7. +
  7. 移除（拔出）CM3 IO 板上的 MicroSD 卡
    8. +
  8. 在上电前按住 CM3 上的 SPI Disable 按键，并保持按住
    9. +
  9. 将 USB-A 转 Micro-USB 连接线插入 CM3 IO 板的 OTG 端口（Micro-USB 端口），另一端插入电脑
    10. +
  10. 插入 DC 12V 电源为 CM3 IO 板供电；如果电源绿灯常亮，则已成功进入 Maskrom 模式（此时可松开按键）
cm3 core button diff --git a/docs/som/cm/cm3/low-level-dev/maskrom/mac-os.md b/docs/som/cm/cm3/low-level-dev/maskrom/mac-os.md index c89d63ff2..f699d5fad 100644 --- a/docs/som/cm/cm3/low-level-dev/maskrom/mac-os.md +++ b/docs/som/cm/cm3/low-level-dev/maskrom/mac-os.md @@ -14,11 +14,11 @@ import Rkdeveloptool from "../../../../../common/dev/\_rkdeveloptoolV2.mdx";
    -
  1. 把 CM3 安装到 IO 板上
    2. -
  2. 移除 MicroSD 卡
    3. -
  3. 按住 SPI Disable 按键
    4. -
  4. 将 USB-A 转 MicroUSB 连接线插入 Radxa CM3 IO OTG 端口（Micro USB 端口），另一端插入电脑
    5. -
  5. 插入电源线上电，如果电源绿灯常亮则成功进入 Maskrom 模式
    6. +
  6. 将 CM3 安装到 CM3 IO 板上
    7. +
  7. 移除（拔出）CM3 IO 板上的 MicroSD 卡
    8. +
  8. 在上电前按住 CM3 上的 SPI Disable 按键，并保持按住
    9. +
  9. 将 USB-A 转 Micro-USB 连接线插入 CM3 IO 板的 OTG 端口（Micro-USB 端口），另一端插入电脑
    10. +
  10. 插入 DC 12V 电源为 CM3 IO 板供电；如果电源绿灯常亮，则已成功进入 Maskrom 模式（此时可松开按键）
cm3 core button diff --git a/docs/som/cm/cm3/low-level-dev/maskrom/windows.md b/docs/som/cm/cm3/low-level-dev/maskrom/windows.md index f555f4119..d3fb45eef 100644 --- a/docs/som/cm/cm3/low-level-dev/maskrom/windows.md +++ b/docs/som/cm/cm3/low-level-dev/maskrom/windows.md @@ -14,11 +14,11 @@ import Rkdevtool from "../../../../../common/dev/\_rkdevtoolV2.mdx";
    -
  1. 把 CM3 安装到 IO 板上
    2. -
  2. 移除 MicroSD 卡
    3. -
  3. 按住 SPI Disable 按键
    4. -
  4. 将 USB-A 转 MicroUSB 连接线插入 Radxa CM3 IO OTG 端口（Micro USB 端口），另一端插入电脑
    5. -
  5. 插入电源线上电，如果电源绿灯常亮则成功进入 Maskrom 模式
    6. +
  6. 将 CM3 安装到 CM3 IO 板上
    7. +
  7. 移除（拔出）CM3 IO 板上的 MicroSD 卡
    8. +
  8. 在上电前按住 CM3 上的 SPI Disable 按键，并保持按住
    9. +
  9. 将 USB-A 转 Micro-USB 连接线插入 CM3 IO 板的 OTG 端口（Micro-USB 端口），另一端插入电脑
    10. +
  10. 插入 DC 12V 电源为 CM3 IO 板供电；如果电源绿灯常亮，则已成功进入 Maskrom 模式（此时可松开按键）
cm3 core button diff --git a/i18n/en/docusaurus-plugin-content-docs/current/e/e24c/README.md b/i18n/en/docusaurus-plugin-content-docs/current/e/e24c/README.md index 673a55c7b..52e90d220 100644 --- a/i18n/en/docusaurus-plugin-content-docs/current/e/e24c/README.md +++ b/i18n/en/docusaurus-plugin-content-docs/current/e/e24c/README.md @@ -115,21 +115,22 @@ The bare board version of the Radxa E24C offers more peripheral interfaces compa | No. | Description | Qty | | :-: | :------------------------------------- | :-: | -| ① | Power Input: DC5525 | 1 | -| ② | Onboard eMMC | 1 | -| ③ | USB 2.0 Type-C (OTG + UART Debug) | 1 | -| ④ | User Button | 1 | -| ⑤ | USB 2.0 Type-A Ports | 3 | -| ⑥ | RTC Battery Connector | 1 | -| ⑦ | MicroSD Card Slot | 1 | -| ⑧ | GPIO: 14-pin Expansion Header | 1 | -| ⑨ | LED Indicators (1x Power, 4x Ethernet) | 5 | -| ⑩ | Power Button | 1 | -| ⑪ | Fan Header | 1 | -| ⑫ | Maskrom Button | 1 | -| ⑬ | Gigabit Ethernet Ports | 4 | -| ⑭ | HDMI 2.1 Output | 1 | -| ⑮ | M.2 NVMe SSD Slot | 1 | +| 1 | Power Input: DC5525 | 1 | +| 2 | Onboard eMMC | 1 | +| 3 | USB 2.0 Type-C (OTG + UART Debug) | 1 | +| 4 | User Button | 1 | +| 5 | USB 2.0 Type-A Ports | 3 | +| 6 | RTC Battery Connector | 1 | +| 7 | MicroSD Card Slot | 1 | +| 8 | GPIO: 14-pin Expansion Header | 1 | +| 9 | LED Indicators (1x Power, 4x Ethernet) | 5 | +| 10 | Power Button | 1 | +| 11 | Fan Header | 1 | +| 12 | Maskrom Button | 1 | +| 13 | Gigabit Ethernet Ports | 4 | +| 14 | HDMI 2.1 Output | 1 | +| 15 | M.2 NVMe SSD Slot | 1 | +| 16 | SPI Nor Flash | 1 | diff --git a/i18n/en/docusaurus-plugin-content-docs/current/e/e24c/hardware-usage/hardware-interface.md b/i18n/en/docusaurus-plugin-content-docs/current/e/e24c/hardware-usage/hardware-interface.md index f71a959a0..817ea98e1 100644 --- a/i18n/en/docusaurus-plugin-content-docs/current/e/e24c/hardware-usage/hardware-interface.md +++ b/i18n/en/docusaurus-plugin-content-docs/current/e/e24c/hardware-usage/hardware-interface.md @@ -45,21 +45,22 @@ For detailed hardware interface pinouts of Radxa E24C, refer to the [Hardware Sc | No. | Description | Qty | | :-: | :------------------------------------- | :-: | -| ① | Power Input: DC5525 | 1 | -| ② | Onboard eMMC | 1 | -| ③ | USB 2.0 Type-C Port (OTG + UART Debug) | 1 | -| ④ | User Button | 1 | -| ⑤ | USB 2.0 Type-A Ports | 3 | -| ⑥ | RTC Battery Connector | 1 | -| ⑦ | MicroSD Card Slot | 1 | -| ⑧ | GPIO: 14-pin Expansion Header | 1 | -| ⑨ | LED Indicators (1x Power, 4x Ethernet) | 5 | -| ⑩ | Power Button | 1 | -| ⑪ | Fan Header | 1 | -| ⑫ | Maskrom Button | 1 | -| ⑬ | Gigabit Ethernet Ports | 4 | -| ⑭ | HDMI 2.1 Output | 1 | -| ⑮ | M.2 NVMe SSD Slot | 1 | +| 1 | Power Input: DC5525 | 1 | +| 2 | Onboard eMMC | 1 | +| 3 | USB 2.0 Type-C (OTG + UART Debug) | 1 | +| 4 | User Button | 1 | +| 5 | USB 2.0 Type-A Ports | 3 | +| 6 | RTC Battery Connector | 1 | +| 7 | MicroSD Card Slot | 1 | +| 8 | GPIO: 14-pin Expansion Header | 1 | +| 9 | LED Indicators (1x Power, 4x Ethernet) | 5 | +| 10 | Power Button | 1 | +| 11 | Fan Header | 1 | +| 12 | Maskrom Button | 1 | +| 13 | Gigabit Ethernet Ports | 4 | +| 14 | HDMI 2.1 Output | 1 | +| 15 | M.2 NVMe SSD Slot | 1 | +| 16 | SPI Nor Flash | 1 | ### MicroSD Card Slot diff --git a/i18n/en/docusaurus-plugin-content-docs/current/orion/o6/getting-started/install-system/udisk_system.md b/i18n/en/docusaurus-plugin-content-docs/current/orion/o6/getting-started/install-system/udisk_system.md index 791ac87a1..42c438fa2 100644 --- a/i18n/en/docusaurus-plugin-content-docs/current/orion/o6/getting-started/install-system/udisk_system.md +++ b/i18n/en/docusaurus-plugin-content-docs/current/orion/o6/getting-started/install-system/udisk_system.md @@ -35,7 +35,7 @@ The default credentials for Radxa OS are as follows: ## Using the System -After successfully logging in, you can proceed with system configuration and development on your Radxa Orion O6N. +After successfully logging in, you can proceed with system configuration and development on your Radxa Orion O6.
diff --git a/i18n/en/docusaurus-plugin-content-docs/current/rock5/rock5b/getting-started/install-os/erase_spi-flash.md b/i18n/en/docusaurus-plugin-content-docs/current/rock5/rock5b/getting-started/install-os/erase_spi-flash.md index 29aba1f4b..eeafc8123 100644 --- a/i18n/en/docusaurus-plugin-content-docs/current/rock5/rock5b/getting-started/install-os/erase_spi-flash.md +++ b/i18n/en/docusaurus-plugin-content-docs/current/rock5/rock5b/getting-started/install-os/erase_spi-flash.md @@ -22,4 +22,4 @@ sidebar_position: 4 ## Cannot boot into system -[Please refer to the section on flashing an image using a USB cable](/rock5/rock5b/low-level-dev/maskrom) +[Please refer to the section on flashing an image using a USB cable](../../low-level-dev/install-os/) diff --git a/i18n/en/docusaurus-plugin-content-docs/current/rock5/rock5b/low-level-dev/install-os/README.md b/i18n/en/docusaurus-plugin-content-docs/current/rock5/rock5b/low-level-dev/install-os/README.md index 79685151f..234243b85 100644 --- a/i18n/en/docusaurus-plugin-content-docs/current/rock5/rock5b/low-level-dev/install-os/README.md +++ b/i18n/en/docusaurus-plugin-content-docs/current/rock5/rock5b/low-level-dev/install-os/README.md @@ -3,3 +3,5 @@ sidebar_position: 1 --- # Installing OS via USB Flashing + + diff --git a/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/erase.md b/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/erase.md index 8a34fbc8e..b0ae25e54 100644 --- a/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/erase.md +++ b/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/erase.md @@ -10,11 +10,11 @@ import ERASE from "../../../../../common/dev/\_erase-spi-emmc.mdx";
    -
  1. Install the CM3 core board onto the CM3 IO Board
    2. -
  2. Remove MicroSD Card
    3. -
  3. Press and hold the SPI Disable button
    4. -
  4. Connect the USB-A to Micro USB cable by plugging the Micro USB end into the Radxa CM3 IO OTG port (Micro USB port), and then plug the other USB-A end into your computer
    5. -
  5. Plug in the power cable to power on the board. If the power LED is steadily illuminated, that indicates the board has successfully entered Maskrom mode
    6. +
  6. Install the CM3 onto the CM3 IO board
    7. +
  7. Remove (unplug) the MicroSD card from the CM3 IO board
    8. +
  8. Before powering on, press and hold the SPI Disable button or the eMMC Disable button on the CM3, and keep it pressed
    9. +
  9. Connect a USB-A to Micro-USB cable to the OTG port (Micro-USB port) on the CM3 IO board, and the other end to the computer
    10. +
  10. Connect the DC 12V power supply to power the CM3 IO board; if the green power LED stays on, it has successfully entered Maskrom mode (you can release the button at this point)
:::tip diff --git a/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/linux.md b/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/linux.md index 915a393d7..e70427812 100644 --- a/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/linux.md +++ b/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/linux.md @@ -14,11 +14,11 @@ Please download the related System Images and Loader refer to [Summary of resour
    -
  1. Install the CM3 core board onto the CM3 IO Board
    2. -
  2. Remove MicroSD Card
    3. -
  3. Press and hold the SPI Disable button
    4. -
  4. Connect the USB-A to Micro USB cable by plugging the Micro USB end into the Radxa CM3 IO OTG port (Micro USB port), and then plug the other USB-A end into your computer
    5. -
  5. Plug in the power cable to power on the board. If the power LED is steadily illuminated, that indicates the board has successfully entered Maskrom mode
    6. +
  6. Install the CM3 onto the CM3 IO board
    7. +
  7. Remove (unplug) the MicroSD card from the CM3 IO board
    8. +
  8. Before powering on, press and hold the SPI Disable button, and keep it pressed
    9. +
  9. Connect a USB-A to Micro-USB cable to the OTG port (Micro-USB port) on the CM3 IO board, and the other end to the computer
    10. +
  10. Connect the DC 12V power supply to power the CM3 IO board; if the green power LED stays on, it has successfully entered Maskrom mode (you can release the button at this point)
cm3 core button diff --git a/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/mac-os.md b/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/mac-os.md index c5c4532f0..a673d492c 100644 --- a/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/mac-os.md +++ b/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/mac-os.md @@ -14,11 +14,11 @@ Please download the related System Images and Loader refer to [Summary of resour
    -
  1. Install the CM3 core board onto the CM3 IO Board
    2. -
  2. Remove MicroSD Card
    3. -
  3. Press and hold the SPI Disable button
    4. -
  4. Connect the USB-A to Micro USB cable by plugging the Micro USB end into the Radxa CM3 IO OTG port (Micro USB port), and then plug the other USB-A end into your computer
    5. -
  5. Plug in the power cable to power on the board. If the power LED is steadily illuminated, that indicates the board has successfully entered Maskrom mode
    6. +
  6. Install the CM3 onto the CM3 IO board
    7. +
  7. Remove (unplug) the MicroSD card from the CM3 IO board
    8. +
  8. Before powering on, press and hold the SPI Disable button, and keep it pressed
    9. +
  9. Connect a USB-A to Micro-USB cable to the OTG port (Micro-USB port) on the CM3 IO board, and the other end to the computer
    10. +
  10. Connect the DC 12V power supply to power the CM3 IO board; if the green power LED stays on, it has successfully entered Maskrom mode (you can release the button at this point)
cm3 core button diff --git a/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/windows.md b/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/windows.md index 6cc45fe77..87c7350aa 100644 --- a/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/windows.md +++ b/i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm3/low-level-dev/maskrom/windows.md @@ -14,11 +14,11 @@ Please download the related System Images and Loader refer to [Summary of resour
    -
  1. Install the CM3 core board onto the CM3 IO Board
    2. -
  2. Remove MicroSD Card
    3. -
  3. Press and hold the SPI Disable button
    4. -
  4. Connect the USB-A to Micro USB cable by plugging the Micro USB end into the Radxa CM3 IO OTG port (Micro USB port), and then plug the other USB-A end into your computer
    5. -
  5. Plug in the power cable to power on the board. If the power LED is steadily illuminated, that indicates the board has successfully entered Maskrom mode
    6. +
  6. Install the CM3 onto the CM3 IO board
    7. +
  7. Remove (unplug) the MicroSD card from the CM3 IO board
    8. +
  8. Before powering on, press and hold the SPI Disable button, and keep it pressed
    9. +
  9. Connect a USB-A to Micro-USB cable to the OTG port (Micro-USB port) on the CM3 IO board, and the other end to the computer
    10. +
  10. Connect the DC 12V power supply to power the CM3 IO board; if the green power LED stays on, it has successfully entered Maskrom mode (you can release the button at this point)
cm3 core button diff --git a/static/img/e/e24c/e24c-interface.webp b/static/img/e/e24c/e24c-interface.webp index 8d4866d94..37358ef09 100644 Binary files a/static/img/e/e24c/e24c-interface.webp and b/static/img/e/e24c/e24c-interface.webp differ