A PSP3000 motherboard that is not supported by current hardware was discovered.

[Cyrus331]

A PSP3000 motherboard that is not supported by current hardware was discovered. The left-side ribbon cable has 11 pins, and the motherboard model is 07G. It is a rather special motherboard.

[Cyrus331]

Current Bluetooth motherboards only have a maximum of 10 pins on the left side; when plugged in, only the left and top sides are functional, while the right and bottom sides are ineffective.

[ste2425]

@Cyrus331 Sorry for the delay.

Yes unfortunately the TA-95 motherboard does have a slight difference for that connector.

Not sure if this is a PSPlaceable or a cutom build. However if you contact Retro Mod Works here: https://www.retromodworks.com/contact

They designed a custom cable for this connector and they may have some spare they could help you out with.

[ste2425]

As a workaround you could use some FFC breakouts to essentially re-wire it yourself, but the cable by Retro Mod Works would be much neater solution.