GitHub - CNCProjects/Post-Processor-Move: This is a ShopBot post processor that allows for the spindle or router to be turned off during a toolpath. You do this by setting the spindle speed from 1 to 99 in VCarve or Aspire. This is so that you can draw a toolpath to be able to slide or move a part with the bit without having to manually edit the code to disable the spindle.

Branches Tags

Name		Name	Last commit message	Last commit date
Latest commit History 3 Commits
ShopBot_Arc_Inch Original.pp		ShopBot_Arc_Inch Original.pp
ShopBot_Arc_Inch.pp		ShopBot_Arc_Inch.pp
ShopBot_run.ini		ShopBot_run.ini

About

This is a ShopBot post processor that allows for the spindle or router to be turned off during a toolpath. You do this by setting the spindle speed from 1 to 99 in VCarve or Aspire. This is so that you can draw a toolpath to be able to slide or move a part with the bit without having to manually edit the code to disable the spindle.