Pr test

.github/workflows/build-test.sh

@@ -0,0 +1,217 @@
+#
+#  Copyright (C) 2025 Texas Instruments Incorporated.
+#
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+#
+#    Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#    Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the
+#    distribution.
+#
+#    Neither the name of Texas Instruments Incorporated nor the names of
+#    its contributors may be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+
+#########################################################################
+#                               Params                                  #
+#########################################################################
+#Get user input
+while [ $# -gt 0 ]; do
+  case "$1" in
+    --device=*)
+      device="${1#*=}"
+      ;;
+    --profile_list=*)
+      profile_list="${1#*=}"
+      ;;
+    --enable_test_build=*)
+      enable_test_build="${1#*=}"
+      ;;
+    -h|--help)
+    echo Usage: $0 [options]
+    echo
+    echo Options:
+    echo --device                   Device to be built
+    echo --profile_list             Profile list separated by comma to be built. Default to release,debug
+    echo --enable_test_build        Enable test build
+    exit 0
+      ;;
+    *)
+      printf "Error: Invalid argument $1!!\n"
+  esac
+  shift
+done
+
+#Default value if not provided
+: ${device:="am64x"}
+: ${enable_test_build:="true"}
+: ${profile_list:="debug,release"}
+
+#Convert , to space
+profile_list=`echo ${profile_list} | sed -e "s|\,| |g"`
+
+#########################################################################
+#                               Log files                               #
+#########################################################################
+log_dir=$GITHUB_WORKSPACE/logs
+build_dir=$GITHUB_WORKSPACE/mcu_plus_sdk
+pr_checkout_dir=$GITHUB_WORKSPACE/pr_checkout
+build_log=${log_dir}/build.log
+build_error_log=${log_dir}/build_error.log
+
+
+ #########################################################################
+ #                               Functions                               #
+ #########################################################################
+print_time_diff() {
+    local end_time=$(date +%s)
+    local start_time=$1
+    local deltatime=$(( end_time-start_time ))
+    local hours=$(( deltatime/3600 ))
+    local minutes=$(( deltatime/60 ))
+    local minutes=$(( minutes%60 ))
+    local seconds=$(( deltatime%60 ))
+    printf "$2: %d:%02d:%02d\n" $hours $minutes $seconds
+    printf " \n"
+}
+
+make_folders() {
+    echo "Making required folder..."
+    mkdir -p ${log_dir}
+    echo "Making required folder ... Done"
+    echo " "
+}
+
+proc=`nproc`
+repo_init() {
+    mkdir workarea 
+    cd workaread
+    echo "Doing repo init and sync ..."
+    local start_time=`date +%s`
+    sudo apt-get update
+    sudo apt-get -y install repo
+
+    repo init -u https://github.com/TexasInstruments/mcupsdk-manifests.git -m ${device}/dev.xml -b main  --depth=1
+    repo sync -j${proc} -q
+
+    #Show the current branch/git status
+    repo forall -c "pwd;git branch -vv | cut -d ' ' -f 1-4"
+
+    print_time_diff $start_time "Repo Init Time"
+    echo "Doing repo init and sync ... Done"
+    echo " "
+
+    #Checkout the PR
+    pushd ${build_dir} 1>/dev/null 
+
+    git fetch origin pull/${PR_NUMBER}/head:pr_${PR_NUMBER} -q
+    git switch pr_${PR_NUMBER}
+    git log --oneline -n5
+    popd 1>/dev/null
+
+}
+
+download_components() {
+    echo "Downloading Components ..."
+
+    local start_time=`date +%s`
+
+    mkdir ${HOME}/ti
+
+    find ./mcupsdk_setup -name "*.sh" -execdir chmod u+x {} +
+    ./mcupsdk_setup/${device}/download_components.sh
+    pip3 install pyserial xmodem tqdm pyelftools construct
+
+    print_time_diff $start_time "Download Components Time"
+    echo "Downloading Components ... Done"
+    echo " "
+}
+
+check_logs() {
+    if [ -e ${build_error_log} ]; then
+        if [ -s ${build_error_log} ]; then
+            echo "Build for SOC $device failed ...."
+            echo 
+            echo
+            cat ${build_error_log}
+            exit 1
+        fi
+    fi
+}
+
+build_sdk() {
+    echo "Build SDK ..."
+    local start_time=`date +%s`
+
+    pushd ${build_dir} 1>/dev/null
+
+    #Scrub build files
+
+    echo "    Scrub Build Files for DEVICE:${device} ..."
+    make -s ${jobs_option} scrub DEVICE=${device} 1>>${build_log} 2>>${build_error_log}
+    make -s gen-buildfiles-clean DEVICE=${device} 1>>${build_log} 2>>${build_error_log}
+    echo "    Scrub Build Files for DEVICE:${device} completed!!"
+    check_logs
+
+    echo "    Generate Build Files for DEVICE:${device} ..."
+    make -s gen-buildfiles DEVICE=${device} 1>>${build_log} 2>>${build_error_log}
+    echo "    Generate Build Files for DEVICE:${device} completed!!"
+    check_logs
+
+    for profile in ${profile_list}
+    do
+        echo "    Building for DEVICE:${device} PROFILE:${profile} ..."
+        make -s -j${proc} all DEVICE=${device} PROFILE=${profile} 1>>${build_log} 2>>${build_error_log}
+        echo "    Building for DEVICE:${device} PROFILE:${profile} completed!!"
+        check_logs
+    done
+
+    if [ "${enable_test_build}" == "true" ]; then
+        for profile in ${profile_list}
+        do
+            echo "    Building Tests for DEVICE:${device} PROFILE:${profile} ..."
+            make -s -j${proc} tests DEVICE=${device} PROFILE=${profile} 1>>${build_log} 2>>${build_error_log}
+            echo "    Building Tests for DEVICE:${device} PROFILE:${profile} completed!!"
+            check_logs
+        done
+    fi
+
+    echo "    Generate docs for DEVICE:${device} ..."
+    make -s docs DEVICE=${device} 1>>${build_log} 2>>${build_error_log}
+    echo "    Generate docs for DEVICE:${device} completed!!"
+    #Redirect doxy error
+    cat docs_src/docs/api_guide/doxy_warnings_${device}.txt >> ${build_error_log}
+    check_logs
+
+    popd 1>/dev/null
+
+    print_time_diff $start_time "Build Time"
+    echo "Build SDK ... Done"
+}
+
+#########################################################################
+#                           Script run                                  #
+#########################################################################
+make_folders
+repo_init
+download_components
+build_sdk

.github/workflows/build-test.yml

@@ -0,0 +1,112 @@
+name: Build Test
+
+env:
+  PR_NUMBER: ${{ github.event.number }}
+
+# Controls when the workflow will run
+on:
+  # Triggers the workflow on push or pull request events but only for the $default-branch branch
+  push:
+    branches: [ "next", "next_stage" ]
+  pull_request:
+    branches: [ "next", "next_stage" ]
+
+# A workflow run is made up of one or more jobs that can run sequentially or in parallel
+jobs:
+  # This workflow contains a build jobs for all the SOCs in the repo
+  build_am64x:
+    # The type of runner that the job will run on
+    runs-on: ubuntu-22.04
+
+    # Steps represent a sequence of tasks that will be executed as part of the job
+    steps:
+      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
+      - uses: actions/checkout@v4
+        with:
+          # Relative path under $GITHUB_WORKSPACE to place the repository
+          path: 'pr_checkout'
+
+      # Runs a single command using the runners shell
+      - name: build_test
+        run: |
+          cp ./pr_checkout/.github/workflows/build-test.sh .
+          chmod +x ./build-test.sh
+          ./build-test.sh --device=am64x
+
+
+  build_am243x:
+    # The type of runner that the job will run on
+    runs-on: ubuntu-22.04
+
+    # Steps represent a sequence of tasks that will be executed as part of the job
+    steps:
+      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
+      - uses: actions/checkout@v4
+        with:
+          # Relative path under $GITHUB_WORKSPACE to place the repository
+          path: 'pr_checkout'
+
+      # Runs a single command using the runners shell
+      - name: build_test
+        run: |
+          cp ./pr_checkout/.github/workflows/build-test.sh .
+          chmod +x ./build-test.sh
+          ./build-test.sh --device=am243x
+
+  build_am263x:
+    # The type of runner that the job will run on
+    runs-on: ubuntu-22.04
+
+    # Steps represent a sequence of tasks that will be executed as part of the job
+    steps:
+      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
+      - uses: actions/checkout@v4
+        with:
+          # Relative path under $GITHUB_WORKSPACE to place the repository
+          path: 'pr_checkout'
+
+      # Runs a single command using the runners shell
+      - name: build_test
+        run: |
+          cp ./pr_checkout/.github/workflows/build-test.sh .
+          chmod +x ./build-test.sh
+          ./build-test.sh --device=am263x
+
+  build_am263px:
+    # The type of runner that the job will run on
+    runs-on: ubuntu-22.04
+
+    # Steps represent a sequence of tasks that will be executed as part of the job
+    steps:
+      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
+      - uses: actions/checkout@v4
+        with:
+          # Relative path under $GITHUB_WORKSPACE to place the repository
+          path: 'pr_checkout'
+
+      # Runs a single command using the runners shell
+      - name: build_test
+        run: |
+          cp ./pr_checkout/.github/workflows/build-test.sh .
+          chmod +x ./build-test.sh
+          ./build-test.sh --device=am263px
+
+  build_am273x:
+    # The type of runner that the job will run on
+    runs-on: ubuntu-22.04
+
+    # Steps represent a sequence of tasks that will be executed as part of the job
+    steps:
+      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
+      - uses: actions/checkout@v4
+        with:
+          # Relative path under $GITHUB_WORKSPACE to place the repository
+          path: 'pr_checkout'
+
+      # Runs a single command using the runners shell
+      - name: build_test
+        run: |
+          cp ./pr_checkout/.github/workflows/build-test.sh .
+          chmod +x ./build-test.sh
+          ./build-test.sh --device=am273x
+