A USB 3.2 Gen1 to Gigabit Ethernet dongle based on the AX88179B.
- The AX88179B supports Precision Time Protocol (PTP) (IEEE 1588v2 and 802.1AS)
- This hardware implementation features a female SMA to break out the 1PPS signal from the AX88179B.
Order your TimeStick from this link: https://www.tindie.com/products/timeappliances/time-stick-v2/
Step 1: First you need to compile the Time Stick module (driver). Either clone the entire repo and take it from there (skip to step 2) so use the following commands:
cd
git clone https://github.com/Time-Appliances-Project/TimeStick.git
cd TimeStick/DRV
make
sudo make install
Step 2: You need to remove cdc_ncm before installing the AX88179A module. Please follow the steps below to remove cdc_ncm and install the AX88179A module.
sudo rmmod cdc_mbim
sudo rmmod cdc_ncm
sudo rmmod ax88179_178a
Step 3: Insert the new module
sudo modprobe ax_usb_nic
This project is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).
You are free to:
Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. NonCommercial — You may not use the material for commercial purposes. For full details, see: https://creativecommons.org/licenses/by-nc/4.0/
As the project creator, I reserve the right to use this material commercially or under any other terms.