| Button | Switch Pin | LED Pin |
|---|---|---|
| VOL-L | 0,1 | - |
| VOL-R | 2,3 | - |
| BT-A | 26 | 27 |
| BT-B | 22 | 28 |
| BT-C | 8 | 9 |
| BT-D | 6 | 7 |
| FX-L | 20 | 21 |
| FX-R | 10 | 11 |
| START | 4 | 5 |
prebuilt https://github.com/speedypotato/Pico-Game-Controller firmware file with the following pinouts can be found in Others/Pico_Game_Controller.uf2
| Part | Qty | Where to get |
|---|---|---|
| PCB | 1 | PCB/gerber.zip, order from JLCPCB |
| Plate acrylic cut (1.5mm) | 1 | Case/plate.dxf-ai, order from any laser cutting service |
| Spacer acrylic cut (3mm) | 1 | Case/spacer.dxf-ai, order from any laser cutting service |
| 3D printed case | 1 | Case/Case.stl, can be ordered from JLCPCB (but recommend printing with your own printer to keep cost down) |
| 3D printed keycaps set (preferably resin printed) | 1 | Others/sdvx keycaps set.stl, ordered from JLCPCB |
| Raspberry pi pico | 1 | Literally anywhere, USB-C clones also works |
| PEC16-4015F-N0024-ND | 2 | https://www.digikey.co.th/en/products/detail/bourns-inc/PEC16-4015F-N0024/3780221 |
| O-rings for encoders (ID: 8mm) | 2 | https://shp.ee/t63umuk |
| Aluminium knobs | 2 | https://a.aliexpress.com/_mNUR4yI |
| 2U cherry stabilizers | 2 | https://www.digikey.co.th/en/products/detail/cherry-americas-llc/0G990224/424648 (PCB mounted stabs of any brand also works) |
| Mechanical switches | 7 | I used Gateron pro silver and Akko silver on mine |
| LED for switches | 7 | https://shp.ee/kx9bmj4 (2x3x4) |
| 100Ω 1/4W resistor | 7 | https://shp.ee/hze8gv4 |
| 10nF 50V capacitor | 4 | https://shp.ee/rhgtur4 |
| M3x15 flat round head screws | 4 | https://shp.ee/g4dy4ak |
| Rubber pads | 4+ | https://www.homepro.co.th/p/1176376 |
