Static-Routing

How to configure Static Routing.

First configure PC1 ip address 192.168.10.2 255.255.255.0 and gateway 192.168.10.1

Second configure Router1

Conf t

Interface g0/0/1

Ip address 192.168.10.1 255.255.255.0

Description connected switch1

No shut

Int g0/0/0

Ip address 172.16.10.1 255.255.255.0

Description connected R2

No shut

Do the same configuration with other side using network 192.168.20.0 255.255.255.0 and 172.16.20.0 255.255.255.255.0.

Now you can configure static routing on Router2

Enable

Conf t

Ip route 192.168.20.0 255.255.255.255.0 172.16.20.1

Ip route 192.168.10.0 255.255.255.0 172.168.10.1

Use command show ip route to see routing table

Ping PC1 to PC2 to test static routing protocol is working and now it is working

.