PicoUSB - Extended capabilities

Repository for PicoUSB - RP2040 based, affordable, easy to use and easy to program Bad USB

Welcome to my fork of the PicoUSB, an RP2040 based Bad USB.

Extensions

Here are some extensions I have added :

-Use of quick action (i.e : copy() will press ctrl+s instead of typing write(control + c))

-Use aliases for a more natural pseudo-code payload writing (i.e up,left,right,down instead of up_arrow,left_arrow,right_arrow,down_arrow)

-Improved the loop feature added by @stefanb. Now you can choose the number of iterations for the loop or opt for an infinite loop

Future Improvement

-I want to add the ability to read PowerShell files from PicoUSB's memory. @Pittermanifique already created something similar for .bat files, and I want to build upon that.

Content

• PicoUSB
  • Setup
  • Operation
  • Important Files
  • Development

Get your PicoUSB here!

Check out PicoUSB Website & Subscribe to our newsetter!

3D Printable Enclosure

You just got an empty PicoUSB? Here's how to program it:

Setup

1. Download the latest CircuitPython for Rasperry Pi Pico.
2. Insert PicoUSB into your USB drive while holding the "Boot" button. (Opens it in a bootloader mode. The first time you do this you don't have to hold the "Boot" button)
3. Copy CircuitPython.uf2 file to the USB and wait for few seconds or a minute for it to finish setting up. (will close and reopen the explorer, be patient)
4. Download/Clone the contents of this repository.
5. Open the USB device in explorer and copy/paste everything from ./src/ into it. (Replace all)

That is it! Modify pico_usb.txt to change the functionality. See below to know what to do next.

(Video Tutorial)

Operation

• Inserting the PicoUSB while not holding any buttons will not show as a USB drive and will execute the "bad usb" code found in the pico_usb.txt.
• Inserting it while holding the "Mode" button will not execute any "bad usb" code and will show as a USB drive. This way you can freely edit the code.
• If you insert it while holding the "Boot" button, it will open in bootloader mode. This is usually only used the first time the device is set up and never again.

Important Files

Caution

Changing any python can result in permanently bricking your device. Be very careful when modifying boot.py as disabling the USB drive without a failsafe could render the device useless! Be careful when writing your own micropython scripts! The developers are not responsible if you brick your own device this way!

• pico_usb.txt - here is where your executable pseudo-code is located.
• layout.txt - here is where you select your keyboard layout.
• code.py - interpreter that executes your pesudo code. Free to modify. (1)
• boot.py - this code executes before the USB is recognised. Free to modify. (1)

pico_usb.txt API:

• delay() - waits for the specified amount of time before resuming execution. Example: delay(0.8)
• press() - presses one or more buttons once. For example to press enter, use press(enter). To "select all", use press(control + a).
• write() - sequentially presses many buttons in a row. example: write(Hello world!)
• hold() - presses and holds down one or more buttons until release() is called
• release() - releases all held keys
• move(x, y) - moves the mouse on the main display to the given location, from the current location as a reference. negative x = left, possitive x = right, negative y = down, possitive y = up.
• click(btn)- clicks the mouse. btn is the mouse button, options are left, right, middle
• scroll(x) - scrolls the mouse. Negative number scrolls down, possitive scroll up
• volume(x) - Modifies the system volume. Negative numbers move the volume slider down by x, possitive move it up by x. min volume = 0. max = 100. volume(mute) mutes the speakers.
• loop() - loops everything before this command

Development

1. Create a new venv: python -m venv .venv
2. Activate the venv: .venv\Scripts\Activate.ps1 (Windows) or source .venv\Scripts\activate (Unix)
3. Install stubs: pip install -r requirements-dev.txt