Prepare qcom-next based on tag 'Linux 6.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git #158
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Enable as modules the BT_BNEP and BT_RFCOMM drivers which are required for Bluetooth profiles such as PAN and SPP. Without these modules, PAN and SPP functionality will not be available. Enable UHID support to allow HID over GATT operations. Without this, user-space cannot create virtual HID devices, which impacts HID profile usage over Bluetooth. Signed-off-by: Wei Deng <wei.deng@oss.qualcomm.com>
Enable various PM configs to enable suspend-resume. Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Enabled various power management debug related kernel config options to improve system diagnostics and aid in development and issue analysis. Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Lontium LT8713sx DP bridge hub can be found in monaco-evk for converting 1 DP to 3 DP output. Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com> Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com> Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com> Link: https://lore.kernel.org/all/20251120-lt8713sx-bridge-linux-for-next-v1-2-2246fc5fb490@qti.qualcomm.com/
…nfigs" Revert commit 68f6c9a. Enabling ICE-related configurations causes crashes on the lemans-evk device, so this change is being reverted until the issue is resolved. Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
CrosVM supports vCPU Stall watchdog. QEMU supports I6300 ESB watchdog. Enable corresponding drivers for Guest VM usecases. Signed-off-by: Nikhil V <nikhil.v@oss.qualcomm.com>
Removed UBSAN, KASAN, kmemleak, lock proving, and function tracing from debug.config to reduce bootup time and prevent probe deferring issues. Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
… for Qualcomm TEE (QTEE) We are planning to replace QPTEE with QCOMTEE on all QCOM-released kernel versions. QTEE allows Trusted Applications (TAs) and services to run securely and offers the same functionality as OPTEE. Signed-off-by: Jiaxing Li <jiaxing.li@oss.qualcomm.com> Link: qualcomm-linux/kernel-topics#121
Added the required configs to enable host kernel accelerator for virtio net(vhost-net) and virtual socket protocol(vsock). Signed-off-by: Nikhil V <nikhil.v@oss.qualcomm.com>
Enable CONFIG_SND_SOC_DMIC as a module in the arm64 defconfig to support digital microphone functionality on Qualcomm's Monaco and Lemans platforms. Link: https://lore.kernel.org/all/20251218084604.2054971-1-ravi.hothi@oss.qualcomm.com/ Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Enable Gunyah watchdog driver for rb3gen2. Signed-off-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
The serial engine must be properly setup before kernel reaches "init",so UART driver and its dependencies needs to be built in. Enable its dependency clocks,interconnect and pinctrl as built-in to boot Glymur CRD board to UART console with full USB support. Link: https://lore.kernel.org/lkml/20250925-v3_glymur_introduction-v1-2-24b601bbecc0@oss.qualcomm.com/ Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Nacked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Enable UINPUT, which is required for BT AVRC profile to register the events and All passthrough commands of AVRCP will be listed in this event under /dev/input/ Signed-off-by: Raghavender Reddy Bujala <rbujala@qti.qualcomm.com>
Enable SENSOR_EMC2305 defconfig to enable fan controller support. Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Enabled PREEMPT_RT in new rt.config to enable RT kernel features. Signed-off-by: Anurag Pateriya <apateriy@qti.qualcomm.com>
On Lemans and Monaco EVK platforms the boot-from-SD-card feature requires an IO expander to be enabled at an early stage to detect the SD card. This IO expander is connected over I2C. Currently the I2C driver is built as a loadable module which resides on the SD card along with other modules. This creates a circular dependency where to detect the SD card the IO expander must be initialized the IO expander depends on the I2C driver and the I2C driver is on the SD card which cannot be accessed until detection succeeds. To break this dependency enable I2C_QCOM_GENI as built-in so that the driver is available during early boot. Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Adding config options for Kubernetes support in qcom.config Signed-off-by: Anurag Pateriya <apateriy@qti.qualcomm.com>
Add CoreSight DT nodes for AOSS, QDSS, CDSP, and Modem blocks to enable the STM and TPDM sources to route trace data to the ETF for debugging. Link: https://lore.kernel.org/r/20251120-add-coresight-nodes-for-pakala-v3-1-03bb7651bc90@oss.qualcomm.com Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Add optional memory heap node that can be used for ADSP fastrpc. Link: https://lore.kernel.org/all/20251209-sm8750-fastrpc-adsp-v3-1-ccfff49a8af9@linaro.org/ Cc: Ekansh Gupta <quic_ekangupt@quicinc.com> Cc: Srinivas Kandagatla <srini@kernel.org> Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Signed-off-by: Vinayak Katoch <vkatoch@qti.qualcomm.com>
Add ADSP fastrpc nodes for sm8750 SoC. Link: https://lore.kernel.org/all/20251209-sm8750-fastrpc-adsp-v3-2-ccfff49a8af9@linaro.org/ Cc: Ekansh Gupta <quic_ekangupt@quicinc.com> Cc: Srinivas Kandagatla <srini@kernel.org> Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Signed-off-by: Vinayak Katoch <vkatoch@qti.qualcomm.com>
Add bindings to describe vendor-specific reboot modes. Values here correspond to valid parameters to vendor-specific reset types in PSCI SYSTEM_RESET2 call. Link: https://lore.kernel.org/r/20251109-arm-psci-system_reset2-vendor-reboots-v17-6-46e085bca4cc@oss.qualcomm.com Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Elliot Berman <elliot.berman@oss.qualcomm.com> Signed-off-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
Add support for SYSTEM_RESET2 vendor-specific resets in qcm6490-idp as reboot-modes. Describe the resets: "bootloader" will cause device to reboot and stop in the bootloader's fastboot mode. "edl" will cause device to reboot into "emergency download mode", which permits loading images via the Firehose protocol. Link: https://lore.kernel.org/r/20251109-arm-psci-system_reset2-vendor-reboots-v17-8-46e085bca4cc@oss.qualcomm.com Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Elliot Berman <elliot.berman@oss.qualcomm.com> Signed-off-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
…ypes Add support for SYSTEM_RESET2 vendor-specific resets in qcs6490-rb3gen2 as reboot-modes. Describe the resets: "bootloader" will cause device to reboot and stop in the bootloader's fastboot mode. "edl" will cause device to reboot into "emergency download mode", which permits loading images via the Firehose protocol. Link: https://lore.kernel.org/r/20251109-arm-psci-system_reset2-vendor-reboots-v17-9-46e085bca4cc@oss.qualcomm.com Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Elliot Berman <elliot.berman@oss.qualcomm.com> Signed-off-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
Add a node for the TC9563 PCIe switch, which has three downstream ports. Two embedded Ethernet devices are present on one of the downstream ports. As all these ports are present in the node represent the downstream ports and embedded endpoints. Power to the TC9563 is supplied through two LDO regulators, controlled by two GPIOs, which are added as fixed regulators. Configure the TC9563 through I2C. Link: https://lore.kernel.org/r/20251101-tc9563-v9-7-de3429f7787a@oss.qualcomm.com Reviewed-by: Bjorn Andersson <andersson@kernel.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Add reserved memory region for audio PD dynamic loading and remote heap requirement. Also add LPASS and ADSP_HEAP VMIDs. Link: https://lore.kernel.org/r/20251117070819.492-1-jianping.li@oss.qualcomm.com Signed-off-by: Jianping Li <jianping.li@oss.qualcomm.com>
Some GPUs like A612 doesn't use a named register range resource. This is because the reg-name property is discouraged when there is just a single resource. To address this, retrieve the 'gmu' register range by its index. It is always guaranteed to be at index 0. Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251204-qcs615-spin-2-v4-1-f5a00c5b663f@oss.qualcomm.com
…logic JSON Schema conditionals can become complex and error-prone when combined with regex patterns. To improve readability and maintainability, replace nested if-else blocks with a flattened structure using explicit enums. Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251204-qcs615-spin-2-v4-2-f5a00c5b663f@oss.qualcomm.com
A612 GPU has a new IP called RGMU (Reduced Graphics Management Unit) which replaces GMU. But it doesn't do clock or voltage scaling. So we need the gpu core clock in the GPU node along with the power domain to do clock and voltage scaling from the kernel. Update the bindings to describe this GPU. Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251204-qcs615-spin-2-v4-3-f5a00c5b663f@oss.qualcomm.com
RGMU a.k.a Reduced Graphics Management Unit is a small state machine with the sole purpose of providing IFPC (Inter Frame Power Collapse) support. Compared to GMU, it doesn't manage GPU clock, voltage scaling, bw voting or any other functionalities. All it does is detect an idle GPU and toggle the GDSC switch. As it doesn't access DDR space, it doesn't require iommu. So far, only Adreno 612 GPU has an RGMU core. Document it in qcom,adreno-rgmu.yaml. Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20251204-qcs615-spin-2-v4-4-f5a00c5b663f@oss.qualcomm.com
Add gpu and gmu nodes for sa8775p chipset. Also, add the speedbin qfprom node and wire it up with GPU node. Link: https://lore.kernel.org/r/20251105-a663-gpu-support-v7-2-1bcf7f151125@oss.qualcomm.com Signed-off-by: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
# Conflicts: # Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
# Conflicts: # arch/arm64/boot/dts/qcom/Makefile # arch/arm64/boot/dts/qcom/talos.dtsi
# Conflicts: # include/linux/firmware/qcom/qcom_scm.h
Adding merge log file and topic_SHA1 file Signed-off-by: Salendarsingh Gaud <sgaud@qti.qualcomm.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Name SHA Commits
tech/bsp/clk 567d776 19
tech/security/firmware-smc a50984a 2
tech/bsp/soc-infra 2949741 9
tech/bsp/remoteproc 27311a4 15
tech/bus/peripherals 486bcf7 1
tech/bus/pci/all 2fdd372 9
tech/bus/usb/dwc 49ac8e0 2
tech/bus/usb/phy cb24d23 11
tech/debug/hwtracing 88c50d8 27
tech/pmic/misc 91e88b9 16
tech/pmic/regulator 81fc8fb 6
tech/mem/iommu fc1b59c 1
tech/mm/audio/all 3a0c2db 4
tech/mm/camss d1d2c38 3
tech/mm/drm 9bb86be 28
tech/mm/fastrpc 844e24f 4
tech/mm/video b5deb4a 15
tech/mm/gpu 1651b6d 5
tech/mproc/rpmsg c3875d9 1
tech/net/ath 2b189c5 19
tech/net/eth c280d7e 1
tech/net/bluetooth b5902f2 2
tech/pm/power 7b7e779 7
tech/pm/thermal 363f414 3
tech/security/crypto fa6b06a 11
tech/storage/all ba8c93d 6
tech/all/dt/qcs6490 87b5b8c 7
tech/all/dt/qcs9100 d8bc255 14
tech/all/dt/qcs8300 f5c9375 27
tech/all/dt/qcs615 5461220 10
tech/all/dt/hamoa 4c89453 11
tech/all/dt/glymur 6e186f9 20
tech/all/dt/kaanapali 9508158 5
tech/all/dt/pakala 6ac5fb5 3
tech/all/config bccaf34 33
tech/overlay/dt 0372190 10
tech/all/workaround 960a7bd 2
tech/mproc/all d19a4c1 5