A pitch-tracking ring modulator audio plugin (VST3/AU/Standalone) built with JUCE 8.
This is just a ring modulator, with pitch tracking because there are none that are free. Traditional ring modulators use a fixed carrier frequency, which means the effect sounds different depending on what note you play -- often dissonant and hard to control.
This plugin adds pitch tracking. It listens to your input, detects the fundamental frequency in real time using the YIN pitch detection algorithm, and locks the modulator oscillator to that pitch. The result is a ring mod effect that tracks what you're playing, producing consistent harmonic relationships regardless of the note. The Rate Multiplier parameter lets you set the ratio between the detected pitch and the oscillator -- 1x gives you octave doubling, 2x gives you a fifth above that, and fractional values produce subharmonic content.
The plugin also has a conventional Manual mode where the oscillator runs at a fixed frequency, for traditional ring mod sounds.
Four oscillator waveforms are available (sine, triangle, square, saw), each producing a different harmonic character. Square and saw use PolyBLEP anti-aliasing to reduce digital artifacts.
- CMake 3.25+
- C++20 compiler
- macOS: Xcode command line tools
- Windows: Visual Studio 2022 (MSVC)
Clone with submodules (JUCE is pinned as a git submodule):
git clone --recursive https://github.com/user1303836/hdn-ringmod.git
cd hdn-ringmodRequires Xcode command line tools (xcode-select --install).
Using the default Makefile generator:
cmake -B build -DCMAKE_BUILD_TYPE=Release
cmake --build build --config ReleaseFor faster builds with Ninja (brew install ninja):
cmake -B build -DCMAKE_BUILD_TYPE=Release -G Ninja
cmake --build build --config ReleaseTo build a universal binary (arm64 + x86_64):
cmake -B build -DCMAKE_BUILD_TYPE=Release -G Ninja -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"
cmake --build build --config ReleaseThe built plugins will be in:
build/HdnRingmod_artefacts/Release/VST3/HDN Ring Modulator.vst3build/HdnRingmod_artefacts/Release/AU/HDN Ring Modulator.componentbuild/HdnRingmod_artefacts/Release/Standalone/HDN Ring Modulator.app
To install, copy the .vst3 to ~/Library/Audio/Plug-Ins/VST3/ or the .component to ~/Library/Audio/Plug-Ins/Components/.
Requires Visual Studio 2022 with the "Desktop development with C++" workload.
From a Developer Command Prompt for VS 2022 (or using vcvarsall.bat):
cmake -B build
cmake --build build --config ReleaseThe built plugin will be in build\HdnRingmod_artefacts\Release\VST3\HDN Ring Modulator.vst3.
To install, copy the .vst3 folder to C:\Program Files\Common Files\VST3\.
cmake -B build -DCMAKE_BUILD_TYPE=Release -DHDN_BUILD_TESTS=ON
cmake --build build --config Release
ctest --test-dir build --build-config Release --output-on-failure| Parameter | Range | Default | Description |
|---|---|---|---|
| Mix | 0 - 100% | 50% | Dry/wet blend |
| Rate Multiplier | 0.1 - 8.0x | 1.0x | Multiplier applied to tracked pitch |
| Manual Rate | 20 - 5000 Hz | 440 Hz | Fixed oscillator frequency (Manual mode) |
| Mode | Pitch Track / Manual | Pitch Track | Pitch source selection |
| Smoothing | 0 - 100% | 50% | Pitch tracking smoothing amount |
| Sensitivity | 0 - 100% | 50% | Minimum confidence for accepting pitch updates |
| Waveform | Sine / Triangle / Square / Saw | Sine | Ring modulator oscillator shape |
In Pitch Track mode, the plugin detects the pitch of the incoming audio using the YIN algorithm, then ring-modulates the signal with an oscillator locked to that pitch (multiplied by the Rate Multiplier). The effect stays dry only until the tracker has a valid pitch, then follows the tracked carrier directly.
In Manual mode, the oscillator runs at a fixed frequency set by the Manual Rate knob.
GPLv3. See LICENSE.
